Bits of rubber in my Eq bottle.

[Redux]

Ok, bro's. I know we have all seen the little bits of rubber that the drawing needle pokes out of the stopper on the way down to the oily goodness. I am reaching the bottom of the bottle and it is getting pretty difficult to avoid drawing them into my syringe.
Is this any cause for concern? What happens if I shoot one of them?

 

[Dial_tone]

Unless you're injecting with a 18 or 20g I would not worry much about it. You could always filter it into another bottle.

 

[mikebzt]

Unless you're injecting with a 18 or 20g I would not worry much about it. You could always filter it into another bottle.

exactly right

 

[Redux]

Actually, I am injecting with a 23g, but I draw with a 18g, and that is what is punching the holes out. Maybe draw with a 23g instead? It would take forever, but I don't much want a lump of rubber in my ass.

What would be involved in filtering it?

 

[Sunday]

i would stop using it if it got somthing floating in it.

u guess u can get an abcess if u inject rubber.

 

[Dial_tone]

Actually, I am injecting with a 23g, but I draw with a 18g, and that is what is punching the holes out. Maybe draw with a 23g instead? It would take forever, but I don't much want a lump of rubber in my ass.

What would be involved in filtering it?

I withdraw with a 20g for that reason.

 

[chyllaxyn]

http://gpzservices.easystorecreator...teg_id/12/parent_ids/0,1/Name/Syringe_Filters

Obviously get the larger pore for oil base.
It’s good to use a filter all the time

good luck

 

[anthony518]

Just pull it with a 23g. It will take a long time, but whos cares, fuck it. At least you won't have any rubber in your stuff. I don't think that it would even go into the pump if the needle is small enough.

 

[Anthony Starks]

Just pull it with a 23g. It will take a long time, but whos cares, fuck it. At least you won't have any rubber in your stuff. I don't think that it would even go into the pump if the needle is small enough.

Exactly, it only takes about 2 minutes to draw a full 3ccs, so its not like you are wasting a lot of time either. You don't want big holes in the top from a sterility point of view too, that why I never understand people drawing with big needles. Can people really be that impatient?!?

 

[anthony518]

I guess. The first time I pulled sust with a 23 g I thought that there was something wrong. Try injecting with that 18g, lol. He is right about the sterility, You don't want big holes in your bottle.