Trenbolone enanthate- here's one for the kitchen chemist

[CYCLEON]

why the 10:1 molar ratio Andy? what about 1:11, etc. what will the final weight of the ester vs tren at this ratio?

 

[Andy13]

why the 10:1 molar ratio Andy? what about 1:11, etc. what will the final weight of the ester vs tren at this ratio?

Esterification is an equilibrium reaction. Using a large molar excess of enanthoic acid favors esterification over hydrolysis.

 

[Bri22]

Bill Roberts say's NEVER heat Trenbolone.

 

[Andy13]

Bill Roberts say's NEVER heat Trenbolone.

Well, guys heat their homemade trenbolone preparations up to 350 degrees F and seem to have decent results.

The heating here would be around 80-90 C. That's under the bp of water.. Shouldn't be a problem.

Andy

 

[thegame65_ve]

Thanks for the informative posts Andy. Anytime you come across anything like this please don't hesitate to post .

 

[Andy13]

Thanks for the informative posts Andy. Anytime you come across anything like this please don't hesitate to post .

I didn't come across this.. This was an Andy original. If anyone wants to donate.... .. Well, they can be the first one's to have it.

Andy

 

[wesdog]

damn, this is a good post. good luck on your experiment.

 

[serge]

the procedure makes scense, but where would one be able to obtain all the chemicals needed?

 

[Andy13]

the procedure makes scense, but where would one be able to obtain all the chemicals needed?

Most can be obtained from the hardware store. You can order the rest.. Cheaply.

 

[RLARG]

Paint thinner comes in different forms ie:naptha,mineral spirits,xylene and mixture of all some of which will leave residuals.
Drain cleaners are usually lye or hydrochloric acid both of which can make a reaction go totally in another direction. Griniard reaction??