Please Scroll Down to See Forums Below 
Since we have all of these aspiring kitchen chemists aboard, here's an easy way to convert trenbolone acetate into trenbolone enanthate, or whatever ester you want.
Isolation of trenbolone acetate from powder
Grind the pellets and soak/stir in toluene (paint thinner). Filter. Scrape the particles off of the filter and stir/soak in some more toluene. Filter.
Evaporate the toluene to dryness. Or, you can extract the toluene with a few 50ml portions of DMSO. To the combined DMSO extracts, add a liter of cold water. The trenbolone will precipitate as a solid. Filter and then add more water to the DMSO/water solution to make sure all the solid has precipitated.
Removal of ester and isolation of purified trenbolone
Heat the trenbolone in a dilute NaOH solution under reflux for 30 minutes. Now adjust the pH back down to 3-4 by the addition of white vinegar (HCL may be used instead). Extract the water with 3x50 ml portions of toluene. Evaporate the toluene to dryness or you may extract the trenbolone with DMSO as in the previous step.
Re-esterification and purification of trenbolone enanthate
Use a 1:10 molar ratio of trenbolone to enanthoic acid. Stir this solution well and then add a few drops of concnetrated sulfuric acid (drain cleaner). Heat this under reflux for 30-50 minutes. Let cool and then neutralize the pH with baking soda/water solution until the pH is strongly alkaline. This will generate a lot of heat and should be done over time with stirring. Let cool. now extract your trenbolone enanthate with 3x50 ml portions of toluene. Evaporate to dryness or, like in the above examples, use DMSO to isolate the trenbolone enanthate.
You now have powder trenbolone enanthate. Dissolve in oil and sterilze as you would with any home made preparation.
Andy
Isolation of trenbolone acetate from powder
Grind the pellets and soak/stir in toluene (paint thinner). Filter. Scrape the particles off of the filter and stir/soak in some more toluene. Filter.
Evaporate the toluene to dryness. Or, you can extract the toluene with a few 50ml portions of DMSO. To the combined DMSO extracts, add a liter of cold water. The trenbolone will precipitate as a solid. Filter and then add more water to the DMSO/water solution to make sure all the solid has precipitated.
Removal of ester and isolation of purified trenbolone
Heat the trenbolone in a dilute NaOH solution under reflux for 30 minutes. Now adjust the pH back down to 3-4 by the addition of white vinegar (HCL may be used instead). Extract the water with 3x50 ml portions of toluene. Evaporate the toluene to dryness or you may extract the trenbolone with DMSO as in the previous step.
Re-esterification and purification of trenbolone enanthate
Use a 1:10 molar ratio of trenbolone to enanthoic acid. Stir this solution well and then add a few drops of concnetrated sulfuric acid (drain cleaner). Heat this under reflux for 30-50 minutes. Let cool and then neutralize the pH with baking soda/water solution until the pH is strongly alkaline. This will generate a lot of heat and should be done over time with stirring. Let cool. now extract your trenbolone enanthate with 3x50 ml portions of toluene. Evaporate to dryness or, like in the above examples, use DMSO to isolate the trenbolone enanthate.
You now have powder trenbolone enanthate. Dissolve in oil and sterilze as you would with any home made preparation.
Andy
Last edited:
