why did i get 25G pins??

[sweed]

when i injected the 3 ccs of deca for my first shot, it felt like 3 hours. so i switched to a 23 g for my next test shot and deca shot... def sooo much smoother and faster... but i ran out, and im stuck with like 70 something 25G pins( ya i bought a bunch just to have).... the test took forever to inject yesterday morning.. how can u guys take the 25 g?? their is no pain for either, only thing i can think of that may differ is a little more damage with the 23's, but not much more. i need to order more 23's!

 

[taoiron]

Try warming your gear. Run it under hot water for a few. I use 25gauge for my quads, bi’s and delts really no issues!! Injecting Test E. I draw it with an 18 inject with the 25.

 

[sweed]

Try warming your gear. Run it under hot water for a few. I use 25gauge for my quads, bi’s and delts really no issues!! Injecting Test E. I draw it with an 18 inject with the 25.

ill def try that out next time with my next 3cc injection saturday morning.... ehhhh. ill be injecting in quads prob.
btw.... hasn't even been a week... seeing any girl right now, or thinkging of anything.. and im going crazy!! lol

 

[digimon7068]

ill def try that out next time with my next 3cc injection saturday morning.... ehhhh. ill be injecting in quads prob.
btw.... hasn't even been a week... seeing any girl right now, or thinkging of anything.. and im going crazy!! lol

Wood is good

 

[RADAR]

A hairdryer works good also.

RADAR

 

[sweed]

A hairdryer works good also.

RADAR

I dont have stylish hair like you, so i dont have one

 

[RADAR]

I dont have stylish hair like you, so i dont have one

hee hee (snicker)

RADAR

 

[Dial_tone]

when i injected the 3 ccs of deca for my first shot, it felt like 3 hours. so i switched to a 23 g for my next test shot and deca shot... def sooo much smoother and faster... but i ran out, and im stuck with like 70 something 25G pins( ya i bought a bunch just to have).... the test took forever to inject yesterday morning.. how can u guys take the 25 g?? their is no pain for either, only thing i can think of that may differ is a little more damage with the 23's, but not much more. i need to order more 23's!

run the syringe under hot water for a few minutes...better yet, save those 25g's for b-12.

 

[bluehen]

At least you can order just the pins and swap out the 25's for the 23's. You would still have the 25's for the smaller muscles.

 

[nsashbl01]

The only time 25's are a pain to push are when shooting 3cc in glutes. Hard to get back there to start, then the plunger is so far out it's tough to push without moving around. 25's are the way to go all in all for me.

 

[Ozz2001]

23g is good but 22g is so much faster,but if your a wimp stick to 23g.....Bet that 25 took like 8min to draw up too

 

[sweed]

23g is good but 22g is so much faster,but if your a wimp stick to 23g.....Bet that 25 took like 8min to draw up too

23s are perfect , i can inject faster but go a littl slower on purpose. i use 20's to draw up

 

[paridhm]

I like 25's for thighs, bi's, etc...everything other than glutes.

 

[Stainless_Steel]

Damn it I just ordered 100 25g pins for my next cycle. Reading this makes me want to try 23's now. Damn you Sweed now I'm gonna have to order some more.(lol)

 

[sweed]

Damn it I just ordered 100 25g pins for my next cycle. Reading this makes me want to try 23's now. Damn you Sweed now I'm gonna have to order some more.(lol)

lol.... i replied back to your email

 

[Beachbum1546]

Do all syringes (except for slin pins) have the ability to switch the needles out?

So, if i wanted to buy 100 23g syringe/needle combo for the actual injecting I could just buy 100 18g needles for the drawing from the vial?

 

[bluehen]

Do all syringes (except for slin pins) have the ability to switch the needles out?

So, if i wanted to buy 100 23g syringe/needle combo for the actual injecting I could just buy 100 18g needles for the drawing from the vial?

They all should be interchangeable, "So, if i wanted to buy 100 23g syringe/needle combo for the actual injecting I could just buy 100 18g"
and that's what I did.

 

[taste-icles]

suck it up bro, you could be like me and end up with a box of 18's for two months!!! better to take a little longer than get harpooned. Luckily I now have some 22's courtesy ag-guys

 

[Indy]

when i injected the 3 ccs of deca for my first shot, it felt like 3 hours. so i switched to a 23 g for my next test shot and deca shot... def sooo much smoother and faster... but i ran out, and im stuck with like 70 something 25G pins( ya i bought a bunch just to have).... the test took forever to inject yesterday morning.. how can u guys take the 25 g?? their is no pain for either, only thing i can think of that may differ is a little more damage with the 23's, but not much more. i need to order more 23's!

I always keep the 25g on hand, agreed for many substance just too long and not worth it, but great for doing HCG IM vs. sub-q, winny or any water based gear, tren goes thru them, lot's of uses, but standard deca/test/primo, the oil is just too thick, sometimes even when heated under running water.

 

[Ozz2001]

Ok ppl educate me on this pin thing..I always used a 23g shit was slow so i got some 22g and the shit draws in like a sec..Now i always thought the lower the number was smaller but know i wonder since the 22 runs faster then the 23 did so do i stand correct on this? If not please correct me....
Had to ask after reading some of these replys.....

 

[bluehen]

Ok ppl educate me on this pin thing..I always used a 23g shit was slow so i got some 22g and the shit draws in like a sec..Now i always thought the lower the number was smaller but know i wonder since the 22 runs faster then the 23 did so do i stand correct on this? If not please correct me....
Had to ask after reading some of these replys.....

The higher the number the smaller. I have 29g insulin pins to give an idea.

 

[Ozz2001]

The higher the number the smaller. I have 29g insulin pins to give an idea.

LOL ok thought i was going crazy there for a minute guess i am a tough guy using a 22g then lol........K

 

[bluehen]

LOL ok thought i was going crazy there for a minute guess i am a tough guy using a 22g then lol........K

Lol! Good job tough guy!

 

[Ozz2001]

 

[bluehen]

Funk that I know a guy that uses an 18g and a 22g for sites. He's not tough just psycho!

 

[Indy]

Do all syringes (except for slin pins) have the ability to switch the needles out?

So, if i wanted to buy 100 23g syringe/needle combo for the actual injecting I could just buy 100 18g needles for the drawing from the vial?

No they are not, you can order them as needle and syringe seperate which means you can, or you can order needle/syringe combo where they come permanently glued in the syring like a slin pin, check getpinz.com they have both for you to look at.

 

[bigtravis]

Funk that I know a guy that uses an 18g and a 22g for sites. He's not tough just psycho!

damn! no shit.

 

[black sheep]

I only use 25ga - I draw with 18 and inject with 25. I run the syringe under hot water for about 2 minutes then inject right away.. It goes plenty fast that way... I am using 25ga right now to inject Test LE (400mg/ml) and EQ 600mg/ml - no probs!

 

[bluehen]

damn! no shit.

The kid just turned 22 and has been using over a gram since he was 18, sick guy!

 

[bigtravis]

man, the only time i ever used an 18g was when i used to get sust. redijects that came with them. was curious and only tried it once. that was like 8 years ago. but it seems like yesterday it hurt so bad.

 

[maldorf]

Ok ppl educate me on this pin thing..I always used a 23g shit was slow so i got some 22g and the shit draws in like a sec..Now i always thought the lower the number was smaller but know i wonder since the 22 runs faster then the 23 did so do i stand correct on this? If not please correct me....
Had to ask after reading some of these replys.....

The higher the number the thinner the diameter of the needle. I think it might stand for the fraction of an inch that it is, but this is just a guess. Was thinking a 25 gauge would be 1/25th of an inch, a 23 guage is 1/23rd of an inch.

 

[taste-icles]

Funk that I know a guy that uses an 18g and a 22g for sites. He's not tough just psycho!

Oh YEAH?!?!?! Well I know a guy that uses a straw!

 

[RADAR]

man, the only time i ever used an 18g was when i used to get sust. redijects that came with them. was curious and only tried it once. that was like 8 years ago. but it seems like yesterday it hurt so bad.

Sometimes i get tired of being a pincushion .i'll heat whatever i'm using up draw with an 18G grab a slin pin 29G remove the plunger fill & shoot, its slow but feels better to have some relief once in a while.

RADAR

 

[kbrkbr]

If you brew your own using a light oil like grape seed, then it will blast right through a 25 g.

Besides, I find that the slower I inject, the less pain I suffer afterwards. So even if I'm using a 23g. I inject no faster than I would a 25.

 

[sweed]

just did a quad shot with a 25... ran it under hot water for a good minute. stuck that shit in my quad and then injected.. it was slow, but a little faster than my other injections... not bad.

 

[UA_Iron]

Sweed.

I got a ton of 23g needles...but I prefer the 25g lets make a trade?

 

[richspc]

needle gage size, 22,23,25,etc. is the outside diameter of the needle. Example 22 gage is .022 thousands of 1 inch. A human hair is approx. .001 thousands of an inch.

 

[sweed]

just bought some 23s last night

 

[used2juice]

I only use 25ga - I draw with 18 and inject with 25. I run the syringe under hot water for about 2 minutes then inject right away.. It goes plenty fast that way... I am using 25ga right now to inject Test LE (400mg/ml) and EQ 600mg/ml - no probs!

I draw with a 22 and inject with 25g 1" for spots and 1.5" for glutes. But I am using Test LE and EQ600, not heating before injection though. Good stuff How much of each are you using? This is my first time breaking a gram and it's NUTS!