What to get for needles/syringes

[chadc]

Need some info on what I should order for syringes and pins for the injection part of my cycle, I've read that people suggest using larger gauge needles for drawing and smaller gauge for sticking and that HCG is usually injected sub-q

20 200mg IM injections of test enanthate
7 HCG Injections

I've got a pretty good idea of what I need but I'm open to suggestions.
Also planning on ordering from gearboxinc unless anyone has a better suggestion on that too

Thanks in advance

 

[bw1]

I use 18 to draw..23 or 25 to inject depending on where.

 

[Lestat]

Get syringes with needles that ar 18.

Then get some 25g pin for injects.

 

[kettlebell]

I just use 22g, 1.5 for everything. If I'm going delt or quad I just stop about .5 early.

I'm a frequent customer of getpinz.com and highly recommend them.

Good luck man.

 

[mrplunkey]

I like to draw everything with an 18G needle (length irrelevant). For shooting oils, I've had success with 21G 1.5" needles, but I always shoot in the ass. My guess is if you are shooting other places, you'd use 1" pins, and since the needle itself would be 33% shorter, you could get away with 23G as well.

For water-based things like winny, I use a 23G 1.5" needle, but again I only shoot in the ass. Just like with oils, I still draw winny with an 18G needle.

 

[NJjuice22]

I like to get 23-25 gauge (depending on the thickness of what is being shot) and 1.5" for glute injects....i draw with a 20g instead of an 18, i noticed with 18's that pieces of rubber break off because the needle is so big, its less of a problem with 20 gauge and with 20 you can pretty much draw up anything nice and fast.

 

[aikido_thefirstone]

I just use 22g, 1.5 for everything. If I'm going delt or quad I just stop about .5 early.

I'm a frequent customer of getpinz.com and highly recommend them.

Good luck man.

Ditto that. 18 g is nice to draw but I don't want to bother with switching them out. It dulls the tip a bit but who cares. I just push it in fast.

 

[iceman111111]

18g to draw is awesome!

Now for the injection, that a bit of a toss up, if you want to get it done and over with (without a huge guage size) I suggest 23 g, get the 25g if you don't mind taking your sweet ass time, LOL!

Anything under 22g, scares the hell out of me!

 

[Dial_tone]

I withdraw with 20g and inject with 23g or 25g. An 18g for withdraw really tears up the rubber top so I wouldn't use that with a 50ml jug. Oil can be hard to push thru a 25g unless you heat it or use thinner oil. Most UG gear probably has sesame oil.

 

[JerkyWolf123]

Gotta love those 18guage pipes...i mean ....... uhrumm... needles.........

Yeow!!

Good luck there........

www.getpinz.com

Ditto that. 18 g is nice to draw but I don't want to bother with switching them out. It dulls the tip a bit but who cares. I just push it in fast.