Trouble loading the pin, help? lol

[njguy1]

so this morning was my first pin. I got scured out of it lol

I loaded the pin, but something wasn't right. I held the bottle upside down, and went to draw but it was REALLY hard to draw 1ML, it like 'dripped' into the pin.

i pushed air into the bottle first to create the vacuum, but it still wouldn't draw. 25gauge 1/4inch pin. then, after it FINALLY drew out 1ml, i said Nah, got scared and went to load it back into the bottle and DAMN it took forever to push that 1ML through the pin back to the bottle.

what was I doing wrong, how come i couldn't draw and push 1ML of test C through that 25g pin?

thanks

 

[Get huge or die Mirin]

Use a 19 gauge to draw and 25 to shoot

 

[Peterlumberjack]

heat it

 

[njguy1]

heat it

whats the best way to heat?

also i dont think the pins i got have interchangable tips

anyone have links to some good 19 and 25 pins where i can swap out the tips once i draw then shoot?

 

[stevesmi]

you are drawing oil, not water.. yeah its gonna take some patience...

if you want to speed up the draw use a thicker needle, but going in will be slow.. its not like what you see on tv or when you go to a doc to get the flu shot or b12 etc. oil is thick shit.. you want to know a slow draw? try drawing primo

cheap pinz is a sponsor and they are g2g for good pins

 

[Pound4PoundAAS]

you are drawing oil, not water.. yeah its gonna take some patience...

if you want to speed up the draw use a thicker needle, but going in will be slow.. its not like what you see on tv or when you go to a doc to get the flu shot or b12 etc. oil is thick shit.. you want to know a slow draw? try drawing primo

cheap pinz is a sponsor and they are g2g for good pins

I back everything he just said 100% including the primo factoid.

 

[AeRoXx]

Cause the pin size your using use 23g and below

 

[oxymoron]

cheap pinz is a sponsor and they are g2g for good pins

Easiest thing here is order 3ml syringes with 21g needles from cheap pinz. In the same order get an equal amount of 25g needles only. Take off the packaging and draw then pop on the 25g and pin urself. I find a 21 is perfect for drawing, any bigger than that and it comes to quick when ur trying to get it right on the measuring tick mark.




Sent using the elitefitness app.

 

[Northup]

Use a 19 gauge to draw and 25 to shoot

What he said. Take awile to inject with a 25 g but les pain


Pimping is easy

 

[ALIN]

so this morning was my first pin. I got scured out of it lol

I loaded the pin, but something wasn't right. I held the bottle upside down, and went to draw but it was REALLY hard to draw 1ML, it like 'dripped' into the pin.

i pushed air into the bottle first to create the vacuum, but it still wouldn't draw. 25gauge 1/4inch pin. then, after it FINALLY drew out 1ml, i said Nah, got scared and went to load it back into the bottle and DAMN it took forever to push that 1ML through the pin back to the bottle.

what was I doing wrong, how come i couldn't draw and push 1ML of test C through that 25g pin?

thanks

Use a 18 or 20g to draw with. Use 23-25g to inject.

 

[RickRock13]

An 18g might be a little big to draw with IMO. That big of a needle can actually take chunks out of the stopper when pushing into the vial. A 22g is what I would go with to draw, 25g to inject

 

[burnthiscorpse]

So by your typing your using a 1/4" pin? I hope thats a typo?


Then when you got scared you pulled the pin out of yourself and stuck the pin back into the vial??? Are you fucking kidding me?


Am I the only one who sees a huge issue with this? or am i missing something?

 

[nb01741]

So by your typing your using a 1/4" pin? I hope thats a typo?


Then when you got scared you pulled the pin out of yourself and stuck the pin back into the vial??? Are you fucking kidding me?


Am I the only one who sees a huge issue with this? or am i missing something?

I saw the 1/4in too... but i dont think he ever poked himself he pussied out before

 

[RickRock13]

So by your typing your using a 1/4" pin? I hope thats a typo?


Then when you got scared you pulled the pin out of yourself and stuck the pin back into the vial??? Are you fucking kidding me?


Am I the only one who sees a huge issue with this? or am i missing something?

I missed the part about the 1/4" pin. I hope that is a typo. He will barely be breaking skin with that. I'm hoping he meant 1 1/4" or something.

Also, the way I understand it he never pinned himself. He just drew the oil into the syringe, got scared, then injected the oil back into the vial.

 

[burnthiscorpse]

I missed the part about the 1/4" pin. I hope that is a typo. He will barely be breaking skin with that. I'm hoping he meant 1 1/4" or something.

Also, the way I understand it he never pinned himself. He just drew the oil into the syringe, got scared, then injected the oil back into the vial.

It was kinda open to interperetation the way i read it. But with some of the shit going on here lately I couldnt not say something aboout it.

 

[RickRock13]

It was kinda open to interperetation the way i read it. But with some of the shit going on here lately I couldnt not say something aboout it.

I hear ya there...lol

 

[njguy1]

It was kinda open to interperetation the way i read it. But with some of the shit going on here lately I couldnt not say something aboout it.

dont wory,

# 1 yes that was a type

#2 yess i pussied out before sticking lol

 

[RADAR]

I draw with an 18G and inj with a 23G never had a problem, yeah I tried drawing with a 23G almost fell alseep while it got to the halfway point ,about as exciting as watching paint dry.

 

[goin on 4T]

I use 22 to draw and 25 to inject. I think 25 to inject for newbs is good so they don't inject too fast and mess themselves up.

 

[ssFLEX34]

Go with 20G puller 23G X 1.5 good for every location, some people don't need to go in the full length so just see what feels right!

 

[JayDiesel]

warm your vial by letting a little less than the bottom half be submerged in hot water. and follow the other tips on drawing and pinning techniques.

Sent from my Nexus S 4G using EliteFitness

 

[Criminal10dinC]

But with some of the shit going on here lately I couldnt not say something aboout it.

Lol


Www.Youtube.com/criminal10dinC = my cycle vlog

 

[ssFLEX34]

warm your vial by letting a little less than the bottom half be submerged in hot water. and follow the other tips on drawing and pinning techniques.

Sent from my Nexus S 4G using EliteFitness

Agree, best way if your going to try and warm it up! Wouldn't recommend any other way..

 

[njguy1]

thanks everyone! great support!
i placed an order from cheap pinz
one last thing, i know everyone says "Intermuscular" for injections, my spot was/is going to be glutes (fat azz and all) but would the test C completely go placebo and all if i just did it subcutaneous, like didnt go all teh way in with the 1.5?

 

[goin on 4T]

Subq is not the way to go w oil based gear. The oil requires a greater amount of blood flow to absorbe the gear. subq is asking for issues such as swelling, irritation, bulges where the oil collects as gravitiy pulls it down and potentially an absess, either sterile or infected.
So what do you think now?
Subq and potentially have a dr suck out the oil later?
Or just go IM?

 

[nb01741]

Ya dude just fuckin stick it in.. I did the same shit my first cycle I would stare at the needle like 2 inches away from my leg for 5 min before I just stuck it in... but trust me, once you do it and pull it out you feel awesome and it's easy as hell. Or just get someone to do it for you for your first time and they won't hesitate. Then you will see that it is completely painless and easy.
Try your outer quad though it's easy to control and Test C or E doesn't hurt at all so there's nothing to worry about. and you can use your 1 1/4 in. pins.