Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply
puritysourcelabs
UGL OZ
UGFREAK
napsgeargenezapharmateuticals domestic-supplypuritysourcelabsUGL OZUGFREAK

today

S

stilleto

ELITE MENTOR
EF VIP
got my nails done, went to the beauty supply store, going to change and sit out in the sun for a bit and go out to dinner later at a place on the lake so i can sit outside and have a beer and salad (to counter act the beer).

what are your plans?
 
Doing a huge event for a local charity at the dealership. Had to come sneak inside the office to sit in the a/c for a bit.
 
  • Like
Reactions: bw1
1) I've already ripped out a unit of shelves/closets to open up a second stairway. Lots of cosmetic work yet to be done.

2) Using this reclaimed wood for landscaping. I'm so industrious.:artist:




Remember to use sunblock, Stilleto!
 
got out of bed at 2.00pm (lol)

spent between 1 and 2 hours cutting down tree trunks

played soccer and some other stuff in the garden with my little brother

going to bed soon. I will have been awake for a grand total of 10 hours today if I manage to be in bed by midnight which is my aim.

Then tomorrow getting up early (like 7.30am) to do my paper round

then hitting the gym

then going to town and the cinema with a friend
 
Last edited:
bailed straw from 7am to 630
(finally done)

back to columbus....
party time!

and def follow the advice on the sunscreen letto. i got burned horribly on my shoulders
 
ExtraMile said:
got up at 2.00pm (lol)

spent between 1 and 2 hours cutting down tree trunks

played soccer and some other stuff in the garden with my little brother

going to bed soon. I will have been awake for a grand total of 10 hours today if I manage to be in bed by midnight which is my aim.

Then tomorrow getting up early (like 7.30am) to do my paper round

then hitting the gym

then going to town and the cinema with a friend
Click to expand...
you better be seeing inception, and the friend better not have a penis
 
Cleaned my kitchen, went swimming with my kids, donated more stuff I don't need to charity, cooked my first pot roast, and doing more laundry. Then, as a reward to myself, after my kids go to bed I'm leaving my spouses ass at home while I go salsa dancing with some of my gay buddies who can dance while straight men with drinks in their hands look on an ogle the young girls from the back of the room.
 
worked out and ran, hardcore session
cooked a mess of good food...crock pot mac and cheese, potatoes, corn,
meatloaf, salad...gonna chill out feast and watch a movie
 
bino said:
worked out and ran, hardcore session
cooked a mess of good food...crock pot mac and cheese, potatoes, corn,
meatloaf, salad...gonna chill out feast and watch a movie
Click to expand...

sounds nice :heart:

I went swimming with my little babe
then went shopping

she is in bed and I'm going to watch a movie. I dont know what yet.
 
You guys had a productive day.

I slept for 14 hours and then finally went to the gym, worked up a nice sweat. Decided to turn my phone off today, it feels a littel weird. Like something is missing..anyhow, I've been watching "curb your enthusiasm" the rest of the day. Most likely I'll be going to bed early tonight, it's too nasty out and I have to be up early anyway.
 
I got up and made breakfast. Then went to see a movie and ran a few errands. Later went out to dinner, came home and chilled out. That's about it/
 
I spent the day on the blue ridge parkway around asheville. We found a bad ass waterfall with a deep pool at the bottom. We fucked around there for a while swimming and jumping off the rock wall with a bunch of teenagers. Fun times.

I've drank with my belligerent cousins the last four nights and I'm fucking exhausted. I'm about to pass out. Sober.
 
slept till noon :) (went to bed at 2am) walked the dogs, got new cable installed, treated mom to dinner and then went to Macy's one day sale and bought some pants....
 
stilleto said:
got my nails done, went to the beauty supply store, going to change and sit out in the sun for a bit and go out to dinner later at a place on the lake so i can sit outside and have a beer and salad (to counter act the beer).

what are your plans?
Click to expand...

Walked my dog on a nature trail, took some stuff to the recycling depot, and this evening went out to eat and a bookstore with the hubby.

I lead the life of excitement and danger you see.
 
stilleto said:
got my nails done, went to the beauty supply store, going to change and sit out in the sun for a bit and go out to dinner later at a place on the lake so i can sit outside and have a beer and salad (to counter act the beer).

what are your plans?
Click to expand...



OMG!!!! we had the exact same day...... unfuckingbelievable! uh except for the
beer part. i'm a recovering alcoholic and i had a non alcoholic brew. wow it
was almost otherworldly identical but the non alcoholic beer squashed the
whole " quantum physics alternate reality multi- dimensional" aspect.
shit.
 
BlueBird said:
1) I've already ripped out a unit of shelves/closets to open up a second stairway. Lots of cosmetic work yet to be done.

2) Using this reclaimed wood for landscaping. I'm so industrious.:artist:




Remember to use sunblock, Stilleto!
Click to expand...

lol... i did, but i was only in the sun for 20 minutes before the sun moved and I was in shade. then i fell asleep.
 
layinback said:
OMG!!!! we had the exact same day...... unfuckingbelievable! uh except for the
beer part. i'm a recovering alcoholic and i had a non alcoholic brew. wow it
was almost otherworldly identical but the non alcoholic beer squashed the
whole " quantum physics alternate reality multi- dimensional" aspect.
shit.
Click to expand...

You also had your nails done yesterday? :confused:
 
stilleto said:
why? what happened?
Click to expand...

found out my cousin passed away. his mom was working midnights and went to check in on him in the morning and he wasn't breathing. he did have a bad adiction and was supposedly clean for the past 4 mos. He used to be on top of the world and would help anyone at any time any way he could. I lived with him and my aunt for 4-5 years in my late teens/early 20's.

The worse part of all is his little brother dies 2 years ago and now him yesterday. He left his mom all alone all her babys are gone.

sorry if i am polluting your thread. i am an emotional wreck rigt now.
 
DannoMight said:
found out my cousin passed away. his mom was working midnights and went to check in on him in the morning and he wasn't breathing. he did have a bad adiction and was supposedly clean for the past 4 mos. He used to be on top of the world and would help anyone at any time any way he could. I lived with him and my aunt for 4-5 years in my late teens/early 20's.

The worse part of all is his little brother dies 2 years ago and now him yesterday. He left his mom all alone all her babys are gone.

sorry if i am polluting your thread. i am an emotional wreck rigt now.
Click to expand...

so sorry to hear about this. Stay strong for your family. My thoughts are with you and yours.
 
DannoMight said:
found out my cousin passed away. his mom was working midnights and went to check in on him in the morning and he wasn't breathing. he did have a bad adiction and was supposedly clean for the past 4 mos. He used to be on top of the world and would help anyone at any time any way he could. I lived with him and my aunt for 4-5 years in my late teens/early 20's.

The worse part of all is his little brother dies 2 years ago and now him yesterday. He left his mom all alone all her babys are gone.

sorry if i am polluting your thread. i am an emotional wreck rigt now.
Click to expand...

it's okay. i'm so sorry.
are you close with his mom at all? it might make you feel better to be there for her. she could probably use the support and company.
 
I made a machining fixture on a 5-axis Hurco CNC mill.

33bied3.jpg


It gets no more manly than this.
 
Underwraps said:
Cleaned my kitchen, went swimming with my kids, donated more stuff I don't need to charity, cooked my first pot roast, and doing more laundry. Then, as a reward to myself, after my kids go to bed I'm leaving my spouses ass at home while I go salsa dancing with some of my gay buddies who can dance while straight men with drinks in their hands look on an ogle the young girls from the back of the room.
Click to expand...

and you wonder why there isn't any more love in your marriage?
 
Today I stayed home, fixed my neighbour's webcam and made some delicious mint glazed boneless pork chops :Chef:

stilleto said:
and you wonder why there isn't any more love in your marriage?
Click to expand...
lol, I noticed it and almost said something but dont want to be accused of stalking/picking on her after our brush in the between the sheets area....
 
RottenWillow said:
Even before I scrolled up and read your description I was thinking hey cool CNC. Is that yours?
Click to expand...

It is!

You can't tell from the picture, but that's a 48" table with true 5-axis (rotating vise + swivel head). I absolutely love it.
 
mrplunkey said:
It is!

You can't tell from the picture, but that's a 48" table with true 5-axis (rotating vise + swivel head). I absolutely love it.
Click to expand...

badass!


You should make RS something to hold his camera so he can tape his 5 plate vibram squat video by himself.
 
miplank said:
lol...


Do you use your cnc machine for work, or just to fuck around with?
Click to expand...

It's parked right next to a 9-axis Citizen Swiss lathe. Originally we were going to make implants in the US but decided we'd go straight to the Dominican Republic instead. It's actually cheaper to park that mill and lathe and use them for pure R&D instead of putting up with the hassles of US manufacturing. Almost all the US-based implant manufacturers are moving to that model.

So the long-winded answer to your question is: Both. It's used for R&D but I mess around with it on evenings and weekends.
 
mrplunkey said:
It's parked right next to a 9-axis Citizen Swiss lathe. Originally we were going to make implants in the US but decided we'd go straight to the Dominican Republic instead. It's actually cheaper to park that mill and lathe and use them for pure R&D instead of putting up with the hassles of US manufacturing. Almost all the US-based implant manufacturers are moving to that model.

So the long-winded answer to your question is: Both. It's used for R&D but I mess around with it on evenings and weekends.
Click to expand...

working on steeltoe vibrams in your spare time rob?
 
mrplunkey said:
It's parked right next to a 9-axis Citizen Swiss lathe. Originally we were going to make implants in the US but decided we'd go straight to the Dominican Republic instead. It's actually cheaper to park that mill and lathe and use them for pure R&D instead of putting up with the hassles of US manufacturing. Almost all the US-based implant manufacturers are moving to that model.

So the long-winded answer to your question is: Both. It's used for R&D but I mess around with it on evenings and weekends.
Click to expand...

what kind of implants bor?
 
miplank said:
you wouldn't happen to have a killer paid/unpaid internship open for Orthopedic trauma implant design would you?
Click to expand...

I don't even know what a killer internship in orthopedic trauma implant design would be. Maybe have them clean up shavings off the floor?

But I do know what it would specifically exclude: A vibrams-powered 5-plate squat. Apparently killer interns can't do that.
 
RottenWillow said:
LMAO. No.

Stands for Computer Numerical Controlled (I think). Basically it's a computer attached to a machine that can fabricate pieces out of metal to your precise specs.
Click to expand...

^^^ This

It's pretty crazy how the technology chain has advanced. You can make a design in SolidWorks, move it to MasterCam and be cutting metal literally in a few minutes.

You still need to know a truckload about machining to get a good part, but the CAM packages keep getting better and better. I figure about the time a regular CNC programmer can match a master machinist, we'll shift to laser sintering and big vats of metal powder.
 
mrplunkey said:
I don't even know what a killer internship in orthopedic trauma implant design would be. Maybe have them clean up shavings off the floor?

But I do know what it would specifically exclude: A vibrams-powered 5-plate squat. Apparently killer interns can't do that.
Click to expand...

okay...I finally googled "vibrams" holy fuckin' LOL at those ugly ass things.
 
miplank said:
okay...I finally googled "vibrams" holy fuckin' LOL at those ugly ass things.
Click to expand...

I was going to post a picture of a gay shoe on another thread to give pick3 some shit.

So I google "gay shoes" and click on "images". Guess what comes-up on the first page?

90vxtu.jpg


WTF????
 
Rachel...lol said:
i never knew what those shoes actually looked like - but I have seen one perso in the gym with them on, ironically
Click to expand...

Two of the top 12 image slots for a "gay shoes" google turn-up vibrams.

The internet has spoken.
 
mrplunkey said:
^^^ This

It's pretty crazy how the technology chain has advanced. You can make a design in SolidWorks, move it to MasterCam and be cutting metal literally in a few minutes.

You still need to know a truckload about machining to get a good part, but the CAM packages keep getting better and better. I figure about the time a regular CNC programmer can match a master machinist, we'll shift to laser sintering and big vats of metal powder.
Click to expand...

I looked at trying to learn to use that software, but realized I was far too lazy.

My dad's an old rich guy who's also a car guy and he's got one. (he's also an engineer) He recently finished restoring his Sunbeam Tiger and made some stuff for it. Mostly brackets and such to get a good, clean, professional look underhood, but he's made bigger stuff too.

He used to make me stuff on his back when I was big into modding my previous cars. He made me a fuel rail for my Mazda 6s once and everyone on the Mazda board flipped out when they saw the pics and wanted him to start mass producing it. He made me entire front grill for that car to replace the semi-cheesy faux chrome plastic one that rawked fucking ass.
 
RottenWillow said:
I looked at trying to learn to use that software, but realized I was far too lazy.

My dad's an old rich guy who's also a car guy and he's got one. (he's also an engineer) He recently finished restoring his Sunbeam Tiger and made some stuff for it. Mostly brackets and such to get a good, clean, professional look underhood, but he's made bigger stuff too.

He used to make me stuff on his back when I was big into modding my previous cars. He made me a fuel rail for my Mazda 6s once and everyone on the Mazda board flipped out when they saw the pics and wanted him to start mass producing it. He made me entire front grill for that car to replace the semi-cheesy faux chrome plastic one that rawked fucking ass.
Click to expand...


pics?
 
miplank said:
Fuck, you don't need google to tell you they're gay. Just your eyes.
Click to expand...
I told you they were geigh, but they are suppose to improve your squat. I was thinking by squat they meant the ability of the fags who wear them to lower their asshole onto a waitng cawck. :D
 
Strongbow said:
I told you they were geigh, but they are suppose to improve your squat. I was thinking by squat they meant the ability of the fags who wear them to lower their asshole onto a waitng cawck. :D
Click to expand...

actually, the last time I mentioned vibrams I said I had no idea what they even were yet, and you said you didn't either.


liar.
 
miplank said:
actually, the last time I mentioned vibrams I said I had no idea what they even were yet, and you said you didn't either.


liar.
Click to expand...
I said I thought they were like geigh ass shoes brah.
 
miplank said:
stfu
Click to expand...
I thought we was a team ngr, stop contradicting me, Bish. :mad: And stop saying STFU thats mine, or Ima fist fuck your eye socket, also my saying that I stole from Pudds.
 
RottenWillow said:
I looked at trying to learn to use that software, but realized I was far too lazy.

My dad's an old rich guy who's also a car guy and he's got one. (he's also an engineer) He recently finished restoring his Sunbeam Tiger and made some stuff for it. Mostly brackets and such to get a good, clean, professional look underhood, but he's made bigger stuff too.

He used to make me stuff on his back when I was big into modding my previous cars. He made me a fuel rail for my Mazda 6s once and everyone on the Mazda board flipped out when they saw the pics and wanted him to start mass producing it. He made me entire front grill for that car to replace the semi-cheesy faux chrome plastic one that rawked fucking ass.
Click to expand...

It's not a lazy thing as much as:

1) CAM software is a real pain in the ass to learn

2) Decent training materials for CAM software just don't exist.

The industry is based on the old Pro-E model where you learn everything by sitting through dozens of $1,500 per day classes. That used to work because Pro-E gurus formed their own little pack which became a self-insulating, self-perpetuating market.

Then came SolidWorks -- something you could learn on your own. Pro-E has been dying ever since. The CAM industry is soooooo ready for something like that to happen.
 
You must log in or register to reply here.

Similar threads

Resurrected
Approved Log My Comeback Lifestyle Log
Replies
63
Views
6K
the_alcatraz
the_alcatraz
Dr_Strangelove
Approved Log TRT Training and Lifestyle Journal
Replies
16
Views
649
the_alcatraz
the_alcatraz
hypogaeum
Approved Log Testosterone HGH Retatrutide Log - Sponsored by UGL OZ
Replies
16
Views
1K
the_alcatraz
the_alcatraz
Noah Wixx
Approved BELIGAS/PHARMAQO DOMESTIC SUPPLY TD!!!
Replies
16
Views
2K
RoySimpson
RoySimpson
UGL OZ
[UGL OZ] Back In Stock: Mast E, Mast P, Rip Blend
Replies
7
Views
1K
abolone
abolone
Top Bottom