TNE Brew(smart people GTFIH!!!!!)

[Mr.Dedication]

Ok so this thing is a bitch!!!! Like the NPP took minutes and that was it but I only got .22um filters so my fingers are about to edging fall off. Im doing 50ml so its taking foreeeeever!

Anyways I have TNE but I didn't know I needed P80 and only have BA and BB. But here's the thing I want to do it with oil cause I've heard it'll make it a lot smoother...is that true? Or can replace the Oil with BAC water to make it much thinner. Cause it takes forever to pull these up or to inject with 25g when using oil.

Sent from my MB860

 

[maxwkw]

Get some guaiacol and EO you'll be much happier.

 

[Tux]

I've made TNE in oil and oil/eo base... works just fine up to 50mg/ml with low BA. Above 50mg/ml, I used 50/50 EO and oil as the carrier and that worked up to 100mg/ml. Never went any higher than that, never saw a need to.

 

[Mr.Dedication]

I've made TNE in oil and oil/eo base... works just fine up to 50mg/ml with low BA. Above 50mg/ml, I used 50/50 EO and oil as the carrier and that worked up to 100mg/ml. Never went any higher than that, never saw a need to.

can you please post the recipe?

 

[bader85]

BA 2%
Guaiacol 20%
GSO 78%
100mg/ml should hold. If you want to be safe add a little EO.

75 mg/ml @ Guaiacol 15%

What recipe did you use for NPP by chance?

 

[Mr.Dedication]

Could you please tell me what the abbreviations are?

BA 2%
Guaiacol 20%
GSO 78%
100mg/ml should hold. If you want to be safe add a little EO.

75 mg/ml @ Guaiacol 15%

What recipe did you use for NPP by chance?

BA 5%
BB 15%
7.5g npp
And the rest grape seed oil
And I believe that's it

Sent from my MB860

 

[rebelhead]

u can simply place the syringe in a caulk gun from wal-mart for sterile filtering. it will save ur hands.
btw a 23g 1.5 inch is best for pinning with oil. i'd just use oil and benzyl alcohol. ethyl oleate and benzyl benzoate will thin the solution, but will possibly speed the release of the hormone from the injection site, therefore requiring more frequent injects.

 

[goin on 4T]

WTF? U don't need that much BA
Way overkill
Npp
is fine in 2% and 15%

Could you please tell me what the abbreviations are?




BA 5%
BB 15%
7.5g npp
And the rest grape seed oil
And I believe that's it

Sent from my MB860

 

[nlieb]

Is it possible to do this without eo? If so up to what concentration?

Sent from my DROID2 GLOBAL using Tapatalk 2

 

[goin on 4T]

probably wtih GS 50mg/ml. But the EO is actually a benifit as you can inject w 1/2" slin pin in close muscles with the EO. Any other oil and you need standard 25 guage.

 

[nlieb]

Is the tne smooth at 100mg/ml? If I'm going to be shooting this 4 days a week I want to keep the limping to a minimum. Do you think it would be possible to get up to 200mg/ml with pure eo and guaicol?

Sent from my DROID2 GLOBAL using Tapatalk 2

 

[goin on 4T]

Is the tne smooth at 100mg/ml? If I'm going to be shooting this 4 days a week I want to keep the limping to a minimum. Do you think it would be possible to get up to 200mg/ml with pure eo and guaicol?

Sent from my DROID2 GLOBAL using Tapatalk 2

First off tne is a once a day minimum comitment. 4 x per week isnt going to cut it. Next, no you cant get it to suspend at 200mg/ml. Its hard enough at 100mg and if you store it at less than 75f it will crash. Tne is less painfull than prop but it will take ur muscles a week or two to get used to the tne so there will be some soarness and swelling.


Sent from my iPhone using EliteFitness app

 

[nlieb]

First off tne is a once a day minimum comitment. 4 x per week isnt going to cut it. Next, no you cant get it to suspend at 200mg/ml. Its hard enough at 100mg and if you store it at less than 75f it will crash. Tne is less painfull than prop but it will take ur muscles a week or two to get used to the tne so there will be some soarness and swelling.


Sent from my iPhone using EliteFitness app

When I said four times per week, I meant pre workout. I'd be running this on top of a test e base and a larger stack. As for keeping it warm, what do you reccomend? A heat lamp, perhaps?

Sent from my DROID2 GLOBAL using Tapatalk 2

 

[goin on 4T]

No its fine in the house just don't let the house get too cold. Mine was always fine in the house some peps put their gear in the garage or who knows where. If you have to wear a coat in your house than its too cold. I have never had a proplem with mine, just some people do what I would call weird stuff w their gear. If it crytalizes just heat it up w hot water or a blow dryer and shake it real good before you inject, oh and let it cool a little damn blow dryer can get hot. When you are making it for your self you learn crashing is no big deal, but fuck these rookies that buy gear are freaking whiners and babies.
Gald to hear you are runing it w E that will be nice do it about 2 hours before you wo and it will be a great addition. If you have anymore questions be sure to ask. TNE is freaking cheap so no worries.
BTW where do you live?

 

[nlieb]

No its fine in the house just don't let the house get too cold. Mine was always fine in the house some peps put their gear in the garage or who knows where. If you have to wear a coat in your house than its too cold. I have never had a proplem with mine, just some people do what I would call weird stuff w their gear. If it crytalizes just heat it up w hot water or a blow dryer and shake it real good before you inject, oh and let it cool a little damn blow dryer can get hot. When you are making it for your self you learn crashing is no big deal, but fuck these rookies that buy gear are freaking whiners and babies.
Gald to hear you are runing it w E that will be nice do it about 2 hours before you wo and it will be a great addition. If you have anymore questions be sure to ask. TNE is freaking cheap so no worries.
BTW where do you live?

Chicago, Illinois, USA, why?

Sent from my DROID2 GLOBAL using Tapatalk 2

 

[goin on 4T]

Chicago, Illinois, USA, why?

Sent from my DROID2 GLOBAL using Tapatalk 2

Just curious, because when you inject and you go out into freezing cold that will cause prop and suspension to knot up also. When its really cold here in I can't go with short esters.
LOL

 

[nlieb]

Just curious, because when you inject and you go out into freezing cold that will cause prop and suspension to knot up also. When its really cold here in I can't go with short esters.
LOL

You'd think the body would keep it at the correct temperature.

Sent from my DROID2 GLOBAL using Tapatalk 2

 

[goin on 4T]

You'd think the body would keep it at the correct temperature.

Sent from my DROID2 GLOBAL using Tapatalk 2

Hey maybe its me. Good luck bro.


Sent from my iPhone using EliteFitness app