SlinPins that dont COMPLETELY SUCK ASS???

[oklahoma86]

Okay... I know I cant be the only one that has this problem... I grabbed some MT2, Ipam, and CJC-1293 from Extreme Peptides during their buy 2 get 1 sale. I plan to start the Ipam/CJC tommorow, but have already used a couple vials of MT2, and as such already have a little experience with subQ shots with insulin pins (I hadnt before the MT2). With the pins I have, I never know from one day to the next what to expect from my injection painwise. I dont mind a 1" or 1.5" teflon coated 25g or 23g needle IM at all, but these fuckin slin pins are a different story. Sometimes I dont even feel it go in, and sometimes it feels like Im trying to pin with a dull pencil... to the point I have to PUSH (hard - probably 5-7lbs pressure... enough that my skin folds instead of the needle inserting!) to puncture my skin, and then it feels like its sticking when I pull it out. Sometimes I dont feel a thing, but usually its worse than the 3cc IM shots I do every other day!!! The pins are Terumo 3/10cc slin pins with a 30g needle, and before I start pinning 3x a day I want to find something more reliable. Does anyone make a pin that small (1/2cc max, I really like the 3/10cc though) that is teflon coated, or more uniformly sharp, or is there a way to lube the needle like I do by letting a couple drops of gear run down the shaft when I inject oil base compounds (and, if so, would this help)??

This isnt the end of the world, Im still gonna run the peps, but I would much rather find a more reliable and consistent needle. Suggestions?
​

 

[oklahoma86]

I just realized that Im also either gonna have to do two seperate shots, or stick a needle in TWO of those thick ass feeling rubber plungers (these peptide stoppers feel thick, but I guess that may be cause of the flimsy ass needle) before I stick it in me!! Which route do people (with personal experience) like to go with this - 2 shots, or one combo??? Does anyone just use one pin to backload another?? Considering they cost practically nothing I wouldnt mind doing that, if it is sanitary and there isnt some other reason I havent thought of to NOT do it.

 

[Arabian]

The slin pins I use are 30's I believe and Ive used both 1/2 inch and 1 inch pins and the 1/2 definitely work better and I know exactly what you are talking about with not knowing if its going to penetrate the skin. I still use the 1 inch because if you shoot a barrel full it will knot using anything less than a 1 inch slin pin. I hope this helps you brother

 

[j_p]

mine are trumo 29g 1/2 cc/ml 0.5" amd iv never hd an issue