Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply
puritysourcelabs
UGL OZ
UGFREAK
napsgeargenezapharmateuticals domestic-supplypuritysourcelabsUGL OZUGFREAK

QV curious

kranked

New member
The following is from a dialouge on another board. What do you guys think about this info about QV? Can anyone confirm it's truth or lack of?

......The QV "deca" is actually 125mg cyp and 75mg nandrolone decanoate. Never, I repeat never use mexican bullshit! You don't drink the water down there do you? Good luck bro!:death:

Reply: would you be so kind as to share with us just how do know for a fact that qv deca is actually just cyp with a little bit of nandrolone? Which lot or batch are you referring to? have you had them tested? just curious bro.

......No problem at all bro. I appreciate you not calling me names either but for asking an intelligent question. My best friend owns the real"IP"- International Pharmaceuticals. I have learned a lot about aas through him and from Dan Duchaine who I used to correspond with since I was a sophmore in college. I am 39 now. We(The IP guy) and myself had a small list of labs that would test products as to if they contained any anabolic and if so how much and in what proportion.
So, not only are ALL of QV products wy undermilligramed but most don't deliver what is advertised on the label.
EX:- a couple of my friends would only ue mex gear just because of the price. But, as you know, you get what you pay for. I finally "gave" them some IP tren , sus, and winstrol(amps). Needless to say, they were blown away and felt like "roid virgins" again on that first cycle, after they'd been using mex gear for the past 5 years.
As an aside, I had read in 't-mag'(Iknow, it sucks) about the above listed cycle and how well these compounds work together. Nobody is complaining bro!
So, in closing I used to do big biz with the mexicans-orders like 80-90K every 2 weeks, so I think that I know a little bit about this. In fact, during every transaction I was always offered the "alternate" deal. That is, the same mex products but at 80% less. Their rational? "they'll be on so much stuff that they won't know what's fake or not and you'll make more $! The reason that I still have my loyal customers is because I don't do them like that! Sure, there's money to be made, but what about integrity? IP all the way bro! Feel free to pm me-Later!
 
I hope nobody actually believes this guy. It is a very blatant smear thread by some one that is addmitedly involved with IP. I can't speak on the quality of IP as I have never used a single product. I have, however, used tons of QV gear over the past few years and I don't have a single complaint. One negative comment I have heard as of late about QV from more than 1 reliable bro is that there may be some fake 50ml enanthates floating around......I have no way to confirm this. Not trying to create a scare, just passing on what I considered advice worth heeding when I heard it.
 
I call bullshit. I hate when people start rumors and don't back it up will evidence. If he's been around for so long he should know better than to post a message like that without proof.
 
how is an IP guy claiming great quality? of all brands I hear the most question marks about their stuff. QV worked well for me
 
Any feedback on the QV Test-Enath 250mg/50ml stuff ??
 
Big Rick Rock said:
Any feedback on the QV Test-Enath 250mg/50ml stuff ??

Has to be the same as 10ml stuff. I don't think they manufacter separately Enanthate for big and for small bottles.
I used both, it's not bad. If you plan to inject more then 1cc, it's better to mix it with something, to avoid later pain. Mixing with QV EQ worked for me just fine.
 
My experience with QV enanthate 50ml has been positive. Be sure to check the box and bottle for the security hollogram. It should be almost rainbow in appearance - not just reflective silver. Check the batch #'s against the QV site, too. I used batch 3 last year, and I'm currently using batch 8. According to the QV site batch 9 is slightly underdosed.
 
panerai said:


Has to be the same as 10ml stuff. I don't think they manufacter separately Enanthate for big and for small bottles.
I used both, it's not bad. If you plan to inject more then 1cc, it's better to mix it with something, to avoid later pain. Mixing with QV EQ worked for me just fine.

I'm sure that it is all manufactured in one batch and then filled in different size bottles... I asked the question since I have heard from 2 people, that the stuff is underdosed.... Probably bullshit rumors started by the competition, but I like to double check anyway.

Do you have the URL to their website?
 
sound like a crock

thats BS...i am sorry but if anything its opposite...its IP that you flip a coin with and dont know what your going to get...not QV...he probably deals with IP and he is biast because his friend he said works for or runs IP...hmmm my good friend sales a products....hmmmm maybe I should help him...duhhhh...anyways I have had some good experience with IP winnie tabs...but QV is consistent...take care...peace...also I wish Duchaine was still alive I miss him and wonder what he would have to say about this.
 
Big Rick Rock said:


I'm sure that it is all manufactured in one batch and then filled in different size bottles... I asked the question since I have heard from 2 people, that the stuff is underdosed.... Probably bullshit rumors started by the competition, but I like to double check anyway.

Do you have the URL to their website?

http://www.qualityvet.com.mx/
 
anyone else feel the need to dilute the qv test E to avoid pain.

also does injecting smaller volumes help with that..

i could easily get away with 1ml at a time with the cycle im planning..

I would really appreciate feedback on this as i am bout to start my first cycle using QV gear
 
Judo Tom said:
anyone else feel the need to dilute the qv test E to avoid pain.

also does injecting smaller volumes help with that..

i could easily get away with 1ml at a time with the cycle im planning..

I would really appreciate feedback on this as i am bout to start my first cycle using QV gear

I have never felt the need to dilute QV enanthate. Injections from the 50ml are slightly more painful than the 10ml due to higher BA content, but in either case it's not that bad. I'm currently using 1.5 cc's from the 50ml every 3 days with very little pain.
 
Thanks Bro..

Keep the responses coming..
 
Judo Tom said:
anyone else feel the need to dilute the qv test E to avoid pain.

also does injecting smaller volumes help with that..

i could easily get away with 1ml at a time with the cycle im planning..

I would really appreciate feedback on this as i am bout to start my first cycle using QV gear
I've recently used the Propinate and the weird thing is that it was painful as all hell in my Quads, but shoulders and glutes were no problem.
QV's not that bad as far as high BA pain in concerned. Try some Tttokkyo Cypionate if you want to feel some pain.

Personal experience with mixing or diluting hasn't been successful.
 
I'm using the 50ml right now and no pain, but it isn't one of the newest batches....

I've heard of fake 50ml's going around, but just seen pictures of fake 10ml vials.
 
I am running qv ethenate /eq now, injections are not bad. Not nearly as bad as sus. I am seeing good results and will probably continue to use qv ethenate. It is cheaper than sus and seems to be giving better results.
 
hey gunz, im abuot to start a qv enth and eq cycle, i was wondreing if u can tell me what ur cycle looks like and whats going on with the cycle, and can u tell me the lot number,s so i can check mine
 
If QV was going to put wrong formula in a bottle. Why a little bit of cyp and deca? If anything it would be a tiny amount of enanthate which would be cheaper than cyp or it would be a little bit of prop so people felt they were getting a little kick at least. Anyway, sounds like a bunch of bullshit! Good read though. I was entertained.
 
Top Bottom