IS 4cc TO MUCH?

[Bubba]

I'm ordering my pins and am planning on using
23g 1 1/2in needles. My problem is I wanna inject 4cc EOD.

Should I....

1. Get the 5cc barrels and do 4cc injections in one spot EOD?

2. Get the regular 3cc barrels and do 2cc in different areas or 2cc ED?

I've never done that large of an injection EOD in one area. I was wondering if any of you have experienced problems with that?

 

[peckerwood]

the most i have ever and will ever hit is 3cc's . now there is someone on here that stated 2 weeks ago that they were hitting 5cc's ....

 

[Bubba]

Thanks for the reply Peckerwood.

How bout the rest of you giving some input?

 

[mike001]

i have went 5 cc in my glute with test and let me tell you, i didnt like it! go with 3 max.

 

[Jeff_rys]

buy the 2 cc syringe

Bubba, if you can find the 2 cc syringe, you can use a 25 gauge.

 

[pgerardone]

Forget 5cc. Get a ten cc case load it up with ten cc's and shot ten cc's in each delt every day. I garuntee you will be huge.

 

[Bubba]

Re: buy the 2 cc syringe

Bubba, if you can find the 2 cc syringe, you can use a 25 gauge.

I've heard of a 25g but not a 2cc barrel.
I guess that would create greater plunger pressure allowing the oil to flow easier throught the pin.

Right?

 

[ORGANON CANON]

Here's what I would do:

I have injected 4cc's no problem in my glute and in my thigh. You can't do the same spot eod though so use each side of the glute and each thigh and you only inject in the same spot once every 8 days.

 

[GinNJuice]

On my last cycle, I was injecting 4cc's eod...... but I was splitting that up into two shots, 2cc's each. That's what I suggest for you.

 

[Bigtyme07]

Bro I wouldnt put that much oil in one spot because you will create alot of pain for yourself besides a big lump underneath the skin that might have to be treated by a Doctor... And you know how Docs feel about gear that they dont prescribe...

 

[Bubba]

How many of you back the 25g pin with a 2cc barrel?

That would be practically a insulin dart.

 

[ORGANON CANON]

How many of you back the 25g pin with a 2cc barrel?

That would be practically a insulin dart.

All depends on what your shooting, but I'll tell you that if you don't want to sit there for 10mins pushing the oil in the get something bigger, I always use 22g and have never felt any pain from them. Suck it up bitch

 

[Bubba]

I used 21g pins last cycle with that nasty IP Sust in them. I stayed with it for the full 10wks. I limped to the gym. I limped to work. So I gotta tell you I ain't no Bitch! Not overly fucking bright but definiteley not a Bitch..

 

[solidspine]

I only use 5 cc syringes, how ever just picked up 200 each 6 cc from Monoject.

Also I don't waste even .10 of a cc, in other words, every 5cc syringe I use has 5cc of gear. Period.

 

[ORGANON CANON]

The main problem I find with bigger needles is the quick accumulation of scar tissue. 23g darts are great, if I were you I would go for that and do the 4cc shots like I said

 

[Bubba]

I understand that the pin leaves scar tissue. How about the larger injections of oil, do they?

 

[ORGANON CANON]

I understand that the pin leaves scar tissue. How about the larger injections of oil, do they?

The larger amount of oil has nothing to do with scar tissue, but it can cause an abcess. I wouldn't do the same spot more then 2 times a week with 4cc. Stick to that and you'll be fine.

 

[Jeff_rys]

you are right Bubba

"I guess that would create greater plunger pressure allowing the oil to flow easier throught the pin. "

Yes.
And by the way i never ever use anything thicker then a 25 gauge and this only for Primobolan Depot.

Winstrol goes through a 30 gauge (Zambon of course).
PGF also a 30 gauge. Injectable Oxandrolone doesn't exist right now.

Shooting no mather what through a 25 gauge does not take you very long. There is some resistance witch is good, so you don't do it too fast.

 

[Bubba]

Thanks Jeff...

I am injecting oils though. Fina/EQ/Test...
I'm still sitting on the fence here.
2 shots at 25g probably equal the scar
tissue of one shot at 23g. A real tough
call. The thought of an oil
abcess is pretty disturbing.

 

[ORGANON CANON]

Re: you are right Bubba

Shooting no mather what through a 25 gauge does not take you very long. There is some resistance witch is good, so you don't do it too fast.

Really? Everytime that I have tried to use a 25g pin for oil (I've tried primo, sust, enathate in 25g) I could never get the oil to go through.

 

[GymRatSD]

Way back when, the Germans and Romanian weightlifters were known to do 10 cc in a glute. Not that I recommend this, but you'd be surprised at the volume of oil a muscle can hold. In the glute, 4 cc is not an issue.

 

[MUSTANG_18]

WOW 10cc in the Glute, that is a lot of oil
I have injected 3cc at once with no problems, I used 22g 1.5' pin in the glute if that matters. You should have no problem with 4cc. Good Luck!

M18

 

[Bubba]

Thanks for all the replies.

 

[The_Eviscerator]

I've done 3, but never 4. Three wasn't bad, but 4 could be a slow and painful process. I would hit the outer quad for that one for sure.

 

[b fold the truth]

I am currentlly shooting 9.5 - 10 cc's a week of deca and prop. I shoot in each quad (2-3cc each), bi's (1-1.5cc), and delts (1-1.5cc's). Enough to alternate well.

B True

 

[nexus7]

ouch...

4CC...thats just asking for massive scar tissue in my opinion.