Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply
puritysourcelabs
UGL OZ
UGFREAK
napsgeargenezapharmateuticals domestic-supplypuritysourcelabsUGL OZUGFREAK

5/8" Length Needle?

JoeBrooklyn1969

JoeBrooklyn1969

Banned
My friend who has been doing gear for a while advised I use a 25g 5/8" length needle.
My ex who is a nurse injects me but she thinks it's too small and I should use 1". Any thoughts? And if I have shot myself with 5/8" does that mean the gear was wasted?
 
I like 23 gauge, but 25 should be gtg


Pain is temporary, glory is forever,
Pm me for information on ntbm products and discounts
NTBM Toll Free Number: ( 1-855-236-6987 )
 
JoeBrooklyn1969 said:
But what about the length. He said 5/8", is that long enough?
Click to expand...

If you have very little muscle mass than ok. But bigger guys should use at least an inch. I prefer 22 g 1 1/2. Also 25 g is really small, seems like the shot would take forever.

Sent from my DROID BIONIC using EliteFitness
 
25 gauge works fine, it's a bit slower, but you shouldn't be trying to inject fast anyway.

5/8 is better for smaller areas especially if you've got lots of fat.

Your gear was not wasted :)
 
You can't go wrong with anything from 21-23G. 1.25-1.5" Simple, Easy, Painless, Effective. Don't mess around with pinz that can potentially waste gear. Stick to what you know. Simple, Easy. :)
 
1"-1.5" for me as well. Unless you have hardly any bodyfat at all or are shooting something like tri's where there is generally little fat, 5/8" is too short.
 
there are countless threads on this subject and there is a good consensus that you should use atleast 1inchers and 25G thickness at a minimum.

reason for length is you have to get oils INTO the muscle or you risk abscesses. don't be scared of a longer needle, the pain is near the skin anyway, that is where the nerves are. just ice down the top of the skin to numb the nerves if you are scared. you won't feel a thing.

25G is important cause oil is thick and if you try loading a syringe with 29 slins then you will notice it takes a long time and is difficult.. now when you go in imagine how long it will take to push oil through a thin needle into your muscle.. its not worth it.
 
I ordered 25g with 1". I shoot into my glute, I'm not getting anything longer. But this Sunday I will try shooting myself with my Nurse friend watching, if I can do it with no problem then going forward I will do on my own.
You should of seen how scared I was when I was shooting myself with the little insulin needles with HGH, LOL!!
 
On other HRT forums there are tons of guys using 29 gauge half inch needles for quads with no problems whatsover, and they did labs before and after to see the changes....and for test at least, Im not sure about other AAS, plenty of folks are doing it SubQ with good results...

So my opinion, your not wasting it if your shooting testosterone...Im not sure if there is a difference with other AAS, but if folks can use 29g half inch or SubQ, there is no reason to think that you are "wasting" your gear...now the whole abcess thing, if thats a problem Im not sure about it but would be careful...

As for me, Im one of those folks who changed to 29g half inch for the quads, and zero issues my labs are still good, never had an abcess...I also have used 27g 5/8" for my glutes and never a problem, I still seem to get stable levels with no probs...

When I do blasts and use AAS, I go back to 1" pins 23-25g for glutes and quads...

Not saying you guys are wrong, but just putting it out there others including myself who has to pin year round forever twice weekly, its nice to use smaller pins, and they fill up slower but its not that big of an issue
 
Power36 said:
On other HRT forums there are tons of guys using 29 gauge half inch needles for quads with no problems whatsover, and they did labs before and after to see the changes....and for test at least, Im not sure about other AAS, plenty of folks are doing it SubQ with good results...

So my opinion, your not wasting it if your shooting testosterone...Im not sure if there is a difference with other AAS, but if folks can use 29g half inch or SubQ, there is no reason to think that you are "wasting" your gear...now the whole abcess thing, if thats a problem Im not sure about it but would be careful...

As for me, Im one of those folks who changed to 29g half inch for the quads, and zero issues my labs are still good, never had an abcess...I also have used 27g 5/8" for my glutes and never a problem, I still seem to get stable levels with no probs...

When I do blasts and use AAS, I go back to 1" pins 23-25g for glutes and quads...

Not saying you guys are wrong, but just putting it out there others including myself who has to pin year round forever twice weekly, its nice to use smaller pins, and they fill up slower but its not that big of an issue
Click to expand...

It will work but I dont want to sit there with a needle in my leg for an hour.

Sent from my DROID BIONIC using EliteFitness
 
Power36 said:
On other HRT forums there are tons of guys using 29 gauge half inch needles for quads with no problems whatsover, and they did labs before and after to see the changes....and for test at least, Im not sure about other AAS, plenty of folks are doing it SubQ with good results...

So my opinion, your not wasting it if your shooting testosterone...Im not sure if there is a difference with other AAS, but if folks can use 29g half inch or SubQ, there is no reason to think that you are "wasting" your gear...now the whole abcess thing, if thats a problem Im not sure about it but would be careful...

As for me, Im one of those folks who changed to 29g half inch for the quads, and zero issues my labs are still good, never had an abcess...I also have used 27g 5/8" for my glutes and never a problem, I still seem to get stable levels with no probs...

When I do blasts and use AAS, I go back to 1" pins 23-25g for glutes and quads...

Not saying you guys are wrong, but just putting it out there others including myself who has to pin year round forever twice weekly, its nice to use smaller pins, and they fill up slower but its not that big of an issue
Click to expand...

the testosterone they are taking isn't thick like some other AAS.

try injecting masteron or primo with a slin pin and let me know how it goes. I'm not even sure you would be able to load the syringe to begin with. but by all means give it a shot and report back how it went, I am very curious
 
Ive never done it with Mast or Primo, I only use them with the name brand Test Cyp I get from the pharmacy...anytime I do a blast I go back to bigger pins, because I dont want to risk "wasting" the gear! Not that I know anything about it, but since Ive read enough threads on here about using the right pin size when it comes to juice I go bigger...but for my testosterone therapy I use the smaller ones...

I trust you guys on that! Yea it takes a little while to draw it up Im used to it, but doesnt take that long to push it in...but Im only doing half a cc every few days, not 1cc or more which might be a hassle in those tiny needles
 
stevesmi said:
did anyone try using slin pins on primo or thicker AAS yet?

i am using tren E and loading with 25G syringe and it takes freakin forever. i might try loading with a slin pin for shits and giggles, but no way would i pin
Click to expand...

I've injected Test C with a slin pin. Wouldn't do it again...
 
in my opinion anything oil based or around 400mcgs/ml its worth the extra sting and use a 23g 1inch

Sent from my GT-I9100M using EliteFitness
 
Steroids should be injected deep into the muscle. 5/8" is too short. 1" minimum, im going to use 1.5" so it goes right into the muscle.
 
I draw with a an 18 gauge and shoot with a 25g 1.5 in needle in the glutes, 25g 1in needle for quads, 25g 5/8in needle in the delts.
 
Thickness isn't muscle related.. length is... thinner will leave less scar tissue...
 
I read it but I was just looking for second opinions. I know in the past I've used 22g for glutes and quads, but thought maybe 25g was better for delts.
 
stingray23 said:
thinner needle,less scare tissue build up, less noticable pin hole
Click to expand...

Nah Bro. 23 is painless and easy to shoot. Rotate your sites and your good. You don't need a million kinds of needles. I buy syringes with 22s on em for drawing and then I buy 23s in 1 and 1.5 for shooting. 1.5 for glutes and 1s for delts and quads. Easy peesy
 
JoeBrooklyn1969 said:
My friend who has been doing gear for a while advised I use a 25g 5/8" length needle.
My ex who is a nurse injects me but she thinks it's too small and I should use 1". Any thoughts? And if I have shot myself with 5/8" does that mean the gear was wasted?
Click to expand...

AAS are meant to be used DEEP IM.
I would go no shorter than 1"
 
Gee, I would much prefer hitting myself in the glutes with a 1 1/2" than anywhere else with a shorter needle. I think quad injections are the worst. That's just my opinion though.
 
montanaboy said:
Gee, I would much prefer hitting myself in the glutes with a 1 1/2" than anywhere else with a shorter needle. I think quad injections are the worst. That's just my opinion though.
Click to expand...

It's not so much the quad injection for me but what you put in it. Mast is easy. B-12 is easy. Primo and Test leave a little soreness.
 
You must log in or register to reply here.

Similar threads

jerseyshoremuscle
New cycle
Replies
0
Views
968
jerseyshoremuscle
jerseyshoremuscle
RoidRage69
Approved Log RoidRage69 Training Log with Purity Source Labs (PSL)
2 3 4 5 6 7 8
Replies
728
Views
56K
the_alcatraz
the_alcatraz
Legomannen123
Tips for a 2nd cycle?
Replies
29
Views
4K
25homes
25homes
Noah Wixx
Approved Log Peptide Pro Bpc157/TB500 Injury Healing Log
Replies
30
Views
4K
Noah Wixx
Noah Wixx
yankeedoodle
Approved Log Yankees 2025 First Cycle Log
Replies
57
Views
7K
RoySimpson
RoySimpson
Top Bottom