Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply
puritysourcelabs
UGL OZ
UGFREAK
napsgeargenezapharmateuticals domestic-supplypuritysourcelabsUGL OZUGFREAK

Who all has injected what with slin pins?

HAYEZ

Crack Peddler
Platinum
So i started injecting with slin pins last few months and i have to say it is great! no scar tissue, no soreness

only thing i have tried is test cyp and tren..anybody else do this also? if so what ?
i couldnt imagine deca working as its difficult enough to get thru a 25 gauge
 
For real dude? Is this a joke

I can only get SOME water based compounds through a slin pin (29 or 27). I cant imagine getting any oil based through it. And plus, they're not really long enough to go IM properly.

What are you trying to do?
 
For real dude? Is this a joke

I can only get SOME water based compounds through a slin pin (29 or 27). I cant imagine getting any oil based through it. And plus, they're not really long enough to go IM properly.

What are you trying to do?
no joke...if your lean enough..i do slin injects in pecs traps lats tricepts bicepts
you draw with a reg 3ml syringe...pop the plunger off the slin pin fill it and inject...pain free and no scar tissue..did last 12 weeks of ed injects like that
 
I agree with Hayze!I have been saying this for years , I have done it many times with no problems, you just need to warm the gear abit, i like forearms!There I said it!
and as long as you warm it , and it's oil based your good to go that is like hayez said as long as you are lean and have muscular forearms.
RADAR
 
Last edited:
Funny, I posted this type of thing up a week ago and got bashed for it by two people. Funny.

I agree with HAYEZ and Radar.

I've used it with tren, npp, and test prop.
 
I was tempted to try this with my test-e as the stuff I use is very thin. I'm certain it would've worked in a slin pin, but all I had were 1/2" pinz.
 
those damn things are too small
 
For tren and masteron i would backload slin pins for the week (drawing with a 23 gauge of course).

So then you've got your back loaded little slin pin with thick oil in it. Grab a hair dryer, hold it upside down, and "roll" the tube back and forth over the hot air. Do this for about a minute. It still takes about 50 seconds to push a CC through a 29 gauge slinpin but the benefits far outweight the inconvenience.

I've done this with some THICK oil too and it works like a charm. For frequent prop/ace injections, this is THE way to roll.

I'm ok with being called a pussy.
 
For tren and masteron i would backload slin pins for the week (drawing with a 23 gauge of course).

So then you've got your back loaded little slin pin with thick oil in it. Grab a hair dryer, hold it upside down, and "roll" the tube back and forth over the hot air. Do this for about a minute. It still takes about 50 seconds to push a CC through a 29 gauge slinpin but the benefits far outweight the inconvenience.

I've done this with some THICK oil too and it works like a charm. For frequent prop/ace injections, this is THE way to roll.

I'm ok with being called a pussy.


Pussy!
 
I just need to lean up a little then I'm all over this. I already bought some 5/8in 25ga and 1/2in 27ga pins that I want to try out but I have to cut up some more first. All the gear I use now is EO based so it's thin as hell anyway. May still need to heat it up a little to get it through a 27 or 29ga pin... we'll see.

If you're lean enough, I see no reason not to do it.
 
Good info as I had no idea heating it made that much of a difference! My pin cushion body thanks you! :biggrin:
 
Always get the typical bunch claimin things...

To answer your question dude, I have shot everything with a slin pin with no worries what so ever. Oil and water fit through - it's all to do with pressure and because the barrel of a slin pin is so thin, the pressure exerted is far greater and so oil can go through.

The only time I ever use a 25gauge instead of a slin pin is when I need to inject 2ml + and only wish to poke myself once.

I have no idea on god's earth why people use 21 and 23g pins - I can't figure it out for the life of me.
 
I just need to lean up a little then I'm all over this. I already bought some 5/8in 25ga and 1/2in 27ga pins that I want to try out but I have to cut up some more first. All the gear I use now is EO based so it's thin as hell anyway. May still need to heat it up a little to get it through a 27 or 29ga pin... we'll see.

If you're lean enough, I see no reason not to do it.

Don't preload all of your stuff. EO will rot the rubber stopper in the syringe.
 
Don't preload all of your stuff. EO will rot the rubber stopper in the syringe.
Good advice. In fact I don't like pre-loading in general. I've only done it to pre-load hcg when I bought amps instead of vials.

On that note though, I wonder about the rubber stoppers in the vials.... Maybe they use a special kind that EO doesn't rot?
 
I wish. It takes me damn near 5 minutes to force schering primo thru a 25G. Shit's thicker than molasses in January.
 
I was tempted to try this with my test-e as the stuff I use is very thin. I'm certain it would've worked in a slin pin, but all I had were 1/2" pinz.

Thats what i use, after poking in press down hard to bury the needle deeper,then inj.
No problems what so ever!

RADAR
 
Always get the typical bunch claimin things...

To answer your question dude, I have shot everything with a slin pin with no worries what so ever. Oil and water fit through - it's all to do with pressure and because the barrel of a slin pin is so thin, the pressure exerted is far greater and so oil can go through.

The only time I ever use a 25gauge instead of a slin pin is when I need to inject 2ml + and only wish to poke myself once.

I have no idea on god's earth why people use 21 and 23g pins - I can't figure it out for the life of me.

I second this one
 
I second this one

I third this... In the early 90's thats all I could get besides the ready-ject's 18gage 1.5 inch HARPOONS....Yeah I hit those 18 gaugers and when you have to choose those or slin you go with the slin's. I would load them from the back and stick my shoulder then lean on the wall for pressure worked great. :)

Nice avatar Big Mike if thats you? Bro looks insane.
 
I third this

Nice avatar Big Mike if thats you? Bro looks insane.


I forth this, and I state it again! People have not tried it yet says it doesn't work.

I have used eq, tren, primo (schering), winstrol, test of all types apart from esterless, masteron... They all go through a slin pin - 29gauge is fine.

and I second it about your Avi Big Mike - you look fukin more than insane!

Props
 
I dont know about this...I understand the logic, but oils are to be injected DEEP IM (not shallow). and the vast majority this would not work. slin pins are only a half inch in length. unless you literally have no fat on you - you are not getting deep enough.
disagree with me - fine. but the whole reason why we want to use slin pins (those of us who do) is its a smaller needle and thus we assume will produce less pain.
 
I dont know about this...I understand the logic, but oils are to be injected DEEP IM (not shallow). and the vast majority this would not work. slin pins are only a half inch in length. unless you literally have no fat on you - you are not getting deep enough.
disagree with me - fine. but the whole reason why we want to use slin pins (those of us who do) is its a smaller needle and thus we assume will produce less pain.

intramuscluar is intramuscular....doesn't matter if you go 1/4 into the muscle or 1/2 into muscle it will absorb the same.
 
I dont know about this...I understand the logic, but oils are to be injected DEEP IM (not shallow). and the vast majority this would not work. slin pins are only a half inch in length. unless you literally have no fat on you - you are not getting deep enough.
disagree with me - fine. but the whole reason why we want to use slin pins (those of us who do) is its a smaller needle and thus we assume will produce less pain.

umm....you can get 1" slin pins
 
intramuscluar is intramuscular....doesn't matter if you go 1/4 into the muscle or 1/2 into muscle it will absorb the same.
True. I used to advise to inject very deep in the muscle, but in my more recent experience as long as you don't inject right next to or above the fascia then you're fine. I had noticed in the past that if I used too short of pins in my glute I got "golf balls" that lasted a few days. I think though that I may have been missing the muscle and injecting into the fat or something like that. I haven't ever had that issue in any other muscle no matter how shallow the inject.

As mwm5 said, IM is IM. All it has to do is make a "depot" of oil in the muscle and the blood from the muscle carries it around the body. Doesn't matter how deep in the muscle you go, there's blood there either way. It's when you accidentally inject into the fat that it can sit there and possibly cause an abcess because there is so much lower blood flow in the fat than in muscle.
 
umm....you can get 1" slin pins
Also true, and you can buy various size tiny guage pins to fit on your regular syringes as well. Just be careful when using a long, tiny guage pin because THAT is when you have the real possibility of it breaking off inside you.
 
I dont know about this...I understand the logic, but oils are to be injected DEEP IM (not shallow). and the vast majority this would not work. slin pins are only a half inch in length. unless you literally have no fat on you - you are not getting deep enough.
disagree with me - fine. but the whole reason why we want to use slin pins (those of us who do) is its a smaller needle and thus we assume will produce less pain.
you dont have to be shredded...you just have to apply pressure tot he pin and inject..
i dont not do delts or quads or glutes.... i do inject into pecs traps lats bi and tri
 
I used to inject test prop in my calves and biceps with a slin pin. Run it under the faucet a little to get it a little warm. I don't think I will ever do that again.
 
I used to inject test prop in my calves and biceps with a slin pin. Run it under the faucet a little to get it a little warm. I don't think I will ever do that again.
Damn I could never pin calves or bis, but I'm gonna start hitting my quads and ventro-glutes with slin pins (or 27ga 1/2" needles on my regular darts) as soon as I lose some more fat.

Btw if you guys aren't shooting your ventro-glutes you don't know what you're missing.
 
Funny, I posted this type of thing up a week ago and got bashed for it by two people. Funny.

I agree with HAYEZ and Radar.

I've used it with tren, npp, and test prop.

You didn't get blasted so much for that, (which I must also apologize for, as I am seeing more and more folks using this method for the everyday pokes) you got blasted for coming in new to this board and being confrontational. Really being a dick just because someone didn't agree with you. Good info though! I even gave you some K...I know whoopee!
 
You didn't get blasted so much for that, (which I must also apologize for, as I am seeing more and more folks using this method for the everyday pokes) you got blasted for coming in new to this board and being confrontational. Really being a dick just because someone didn't agree with you. Good info though! I even gave you some K...I know whoopee!

It had nothing to do with being confrontational. As far as I am concerned it's over. I've seen you on another board as well my friend. Also of the two that I mentioned, you're not one of them.

Just becasue I am new here doesn't mean I don't know what I'm doing, and no you didn't imply that either. Hell, some of the "vets" here give questionable advice at best.

Apology accepted. Friends?
 
I just shot 1.5 cc using slin pins.....GREAT!!!!
 
I tried insulin pin as well, I was doing Testosterone Propionate and EQ injections. Due to the frequent injections, and to avoid scaring... Worked well, as long as you are able to get it in there... I did Quad and Delt injections
 
Ventrogluteal injection is the most painless. It is my regular injection site.

Ventrogluteal Injection
That's the one :D

People usually seem to have a heard time finding it, even from looking at diagrams. If you need any help figuring out where to stick, let me know. It was confusing for me at first too.
 
That's the one :D

People usually seem to have a heard time finding it, even from looking at diagrams. If you need any help figuring out where to stick, let me know. It was confusing for me at first too.

Yeah, I understand the diagrams, but how is that possible to position your own hand to find that spot??
 
I shoot all my test suspension with 30gauge slin pins.

Works great and can shoot it right in the temple because the pin isn't long enough to hit the brain!

Just don't push too hard because you may die, but other than that is works wonders.

MY BRAIN IS FUCKIN HUGE NOW!
 
I shoot all my test suspension with 30gauge slin pins.

Works great and can shoot it right in the temple because the pin isn't long enough to hit the brain!

Just don't push too hard because you may die, but other than that is works wonders.

MY BRAIN IS FUCKIN HUGE NOW!





Members Do not Try this!


I have shot most everything with a slin pin,except Suspension, I didn't like it with a 25 Guage I know it won't work with a 30 guage.

As long as you heat it good you can even draw with it(Just takes some time tho.)

I Don't like back loading because i always end up wasting some.

RADAR
 
Ventrogluteal injection is the most painless. It is my regular injection site.

Ventrogluteal Injection


Yeah... You dont read what we are trying to say at all... The problem here isn't that the injections per-say hurts, if you just do them once a week with 200mg of Deca (something about your post just make me believe that this is what you do) or some other sissy low dose once-a-week stuff.

We all have taken the glute-injections and the quad-injections with regular pins, they are painless as well...

But when you have to do that ED or ED with for example Trenbolone or Testosterone propionate that can cause pain, irritation and scarring bc of the content, the frequent injections or due to necessity of multiple dosing bc of high doses... Try then shooting your dear once so "painless" Vent-glute ED or EOD when it's scarred or irritated...

*owned*
:Popcorn:
 
Yeah... You dont read what we are trying to say at all... The problem here isn't that the injections per-say hurts, if you just do them once a week with 200mg of Deca (something about your post just make me believe that this is what you do) or some other sissy low dose once-a-week stuff.

We all have taken the glute-injections and the quad-injections with regular pins, they are painless as well...

But when you have to do that ED or ED with for example Trenbolone or Testosterone propionate that can cause pain, irritation and scarring bc of the content, the frequent injections or due to necessity of multiple dosing bc of high doses... Try then shooting your dear once so "painless" Vent-glute ED or EOD when it's scarred or irritated...

*owned*
:Popcorn:
Wow I don't even know where to begin.... lol

What about his post made you think he shoots 200mg of deca a week for cycles or something dumb like that? Ventro-glutes are my only injection site when I do long estered cycle's requiring twice weekly injections... and I'm doing more than 200mg of deca a week lol. And when did he say he would only use that one spot for ED injections? Btw the reason its the least painless (yes even LESS painless than glutes and ESPECIALLY quads) is that the ventro glute muscle doesn't ever really get sore even after a hard leg workout. If you workout right (and something about your post makes me think you do sissy leg workouts without atg squats or anything that would really kill your glutes ;)) then your glutes and quads should be so fried after a leg workout you would never want to stick and pin in them and YES it WOULD hurt. However, after that same glute and quad frying workout, your ventro's would still be ready to go and not sore at all.

Umm... *owned*? :P
:chainsaw:
 
This has turned out to be an interesting thread. Please keep it professional gentlemen :)
Sorry it was early and I had to look out for my boy centy :P I'm usually the last person to get into flame wars lol
 
Sorry it was early and I had to look out for my boy centy :P I'm usually the last person to get into flame wars lol

no problem bro...there were no flames really, but i thought why not throw in a little "keep is professional guys" before things get into flaming and then we have to lock threads and give warnings. This is a great board and people appreciate the fact that they can learn and discuss without being flamed, and that's why we have the "no flame wars" policy in the aas and training forums. You guys are all awesome. Thank you for making this board what it is.
 
Wow I don't even know where to begin.... lol

What about his post made you think he shoots 200mg of deca a week for cycles or something dumb like that? Ventro-glutes are my only injection site when I do long estered cycle's requiring twice weekly injections... and I'm doing more than 200mg of deca a week lol. And when did he say he would only use that one spot for ED injections? Btw the reason its the least painless (yes even LESS painless than glutes and ESPECIALLY quads) is that the ventro glute muscle doesn't ever really get sore even after a hard leg workout. If you workout right (and something about your post makes me think you do sissy leg workouts without atg squats or anything that would really kill your glutes ;)) then your glutes and quads should be so fried after a leg workout you would never want to stick and pin in them and YES it WOULD hurt. However, after that same glute and quad frying workout, your ventro's would still be ready to go and not sore at all.

Umm... *owned*? :P
:chainsaw:


For starters... I dont see why you feel like you have to tell me about your leg-workout, since a leg-workout have absolutely nothing to do with the scarring and irritation that occurs inside the muscle when stabbing yourself over and over with a thick needle ED or EOD in the same spots... (insulin needle on top of that syringe however makes those ED shots a sweeeet paradise as the injury that occurs inside that muscle when you puncture it is smaller and thus will heal faster:​

"If you workout right (and something about your post makes me think you do sissy leg workouts without atg squats or anything that would really kill your glutes ;)) then your glutes and quads should be so fried after a leg workout you would never want to stick and pin in them and YES it WOULD hurt. However, after that same glute and quad frying workout, your ventro's would still be ready to go and not sore at all."

...Yes, that sounds great... You are absolutely right, Im nothing more then a sissy. Telling every one that Im a sissy and your workouts are not for Girly-men, Im hoping that made you feel alright? That is ok with me ...but AGAIN that has nothing to do with the scarring and irritation that meds, thick needles and frequent injections can produce.


Second...The reason why the vent-glute would be a more comfortable place to inject, is NOT bc as you stated:
"Btw the reason its the least painless (yes even LESS painless than glutes and ESPECIALLY quads) is that the ventro glute muscle doesn't ever really get sore even after a hard leg workout."
It has to do with the amount of nerves and the placement of those nerves in that area. Again, your killer leg-routine has nothing to do with this... That is just gym-science

Third...NO NO... not the Deca, who could know that? I was just being ironic to a friend of mine who is in this forum from time to time and has a preference for deca real life nick is Popcorn, his fav candy... I for sure did not call anyone dumb, dont lay even any insinuation of that out there... But it sounded like he is only used to shooting once a week injections... yeah!​

"Ventrogluteal injection is the most painless. It is my regular injection site."

Because if he was doing multiple injections, then I think he would see the benefit of switching injection site, since his vent-glute will more then likely get at some point get scarred or irritated... thus no longer so "painless"... Those are his words, that is why I think that is the only place he shoots, because HE said so... No other reason, and there is nothing wrong with that. But regular glute-, quad- and delt-injections are painless as well, when you dont have to do them ED or EOD and when you dont have scarring or irritation.

Many of us who are/have taking/taken frequent injections of meds that are irritating Im sure can can vouch for that nice awakening sensation of sticking a nice thick long needle into what seems to be that same spot again and again... And that will occur in that (what you and your friend calls) "painless" vent-glute area as well if you do them either meds that irritate or do ED or EOD injections...

But if you would have read the thread and the discussion...
Insulin needles however will keep those injection areas less prone to scarring and irritation, so every area will become that "painless" area... And the benefit here is instead of shooting once or twice a week a total worth of 8ml of different type of meds with a thick needle, becoming sore, prone to scarring, irritated and with irregular peaks in hormones... Why not, go for shooting less amount of meds each time, but shooting ED or EOD injections (still the same weekly dosage). This would be the most beneficial way if you are looking for quality gains and minimum sides... Insulin needles actually allows you to do this, this is what we are talking about in this thread, the pros and cons of insulin needles... Not your vent-glute and not the leg-rutine​

Cheers, all the best and keep up the killer leg-workout mate
 
Top Bottom