What's the thinest needle

[MustAdministerSeroidS]

I can use for winnie site injections i have some 25G 0.5" ,1" and 5/8" lengths i want to do delts and bi's manly.
I used the 1" 25G for delts with deca and sus and it was difficult to get through ? will it work ok with the winnie ?


Thanks for your time


M.A.S.S

 

[Bigredbaron]

The 25gauge works great orwinnie as long as it's not the Stanovol V by Ttokkyo 100mg/ml. That shit is like glue. Make sure before you draw you shake the bottle a lot to get it mixed up. If you are using Winstrol V you will also have problems with that needle size becuz' the particales are larger than the other products.

 

[Jeff_rys]

it is hard to say, since you do not mention what Winny

The Zambons go through a 30 g.
Winny-V should be well shaken, eventually heating the syringe will help also. Good luck with the 25 then.

As for the Sust or Deca, they go easily through a 25 g, try a 26.

 

[MustAdministerSeroidS]

Re: it is hard to say, since you do not mention what Winny

The Zambons go through a 30 g.
Winny-V should be well shaken, eventually heating the syringe will help also. Good luck with the 25 then.

As for the Sust or Deca, they go easily through a 25 g, try a 26.

Great the winnie i have are Zambons.

But as for the deca and sus i did have difficultys with it through the 25G and i always heat the amp/vial and the syringe
Although i did also draw it with a 25G then changed needles would i be n=better of drawing with a 21G? Dose this make a difference?

Sorry if these questions sound dumb to some of you

M.A.S.S

 

[Lostdog]

The Zambons go through a 30 g.

Wow I didnt even know they made pins that small

 

[Jeff_rys]

even smaller

31 gauge exists also, don't know for 32 g, but i would not bet my life on it that it doesn't exist.

 

[Jeff_rys]

Re: Re: it is hard to say, since you do not mention what Winny

Great the winnie i have are Zambons.

But as for the deca and sus i did have difficultys with it through the 25G and i always heat the amp/vial and the syringe
Although i did also draw it with a 25G then changed needles would i be n=better of drawing with a 21G? Dose this make a difference?

Sorry if these questions sound dumb to some of you

M.A.S.S

You must consider this:

1) the length of the needle comes into play
2) the size of the syringe (the shorter, the easier)
3) the gauge of the needle

So if you use a 25 g and a 3 cc syringe (or 5 cc) then it will be more difficult to get the gear out, but easier to draw the gear up.

That's why you can draw up Deca or Sust easy (well sort of) with a 25 g.

If you use a 26 g 1/2 inch (delts or arms), a 2 cc syringe Deca or Sust will go through it as it should. Meaning slow.

Normally you should use a thicker needle to draw up. Since the drawing needle is not the one used for injection, anything between 18 and 22 will do.

You can draw up the Zambons with a 27, so you can shoot it with a 30 g.

 

[str8cubano]

just drink the winny and save yourself some problems

 

[musclebones]

so willi be fine with zambon winny using 25g 1" ?? thats what i have and don'g feel like goin through the hassle of gettin more

 

[Quadsweep]

I have had Upjohn Winne clog on me in a damn 20 ga. That sucks because I had to pull the big bitch out change needles and restick!

 

[Bigredbaron]

A RULE OF THUMB WHEN INJECTING WINNIE IS THAT YOU SHOULD HEAT THE VIAL AND/OR SYRINGE SO THE INJECTIONS FLOWS A LOT EASIER. tHIS GOES FOR THE TT STANABOL V AND WINSTROL V THEY HAVE LARGER PARTICLE SIZES THEN THE ZAMBON. I USE STANABOLIC WITH A 25GAUGE NEEDLE FOR INJECTIONS IN THE THIGHS, BICEPS, TRICEPS AND CHEST AND HAVE NO PROBLEMS. MIGHT WANT TO THINK ABOUT CHANGING THE TYPE OF WIINIE YOU ARE USING. ONLY A SUGGESTION.

 

[Jeff_rys]

Zambons rule

no one having Zambons should consider changing to Winny-V, which is and always will be inferior to the Zambons.
By the way, Zambons are cheaper then Winny-V.