QUESTION on SHRUGS:
- I read that we are not suppose to go to the bottom, but are we meant to roll the shoulders or around, or go straight up, flex at top, and then 3/4 way down.
Bend Forward roughly 2-3 inches, look straight ahead , and do a Simple shrug up. The Movement is literally about 3-4 inches up and down yet, get your upper back gets HUGE if done right
QUESTION on DELTOID SIDE RAISES:
- Are these meant to be done slightly in front of the body, or completely to the side. Also, I'm assuming that here we should only go 1/2 way down on the downward motion, as otherwise all tension is lost.
Bend Forward roughly 2-3 inches, look straight ahead and do not do the top 15% of the movement of the lower 15%. Thus to achieve constant tension arms never go above shoulder level and never touch sides on the bottom
QUESTION on BISCEP/REVERSE Curls:
- doing these with the strictest of form, I noticed at the top of the motion, when my biscels are completely contracted and flexed, my bisceps are really only 3/4's way up (i.e., they say 30 degrees away from vertical). Is that how the movement is meant to end (i.e., not really even close to vertical)
Barbell CURLS " just do them" and follow good form so on this exercise don't get too technical outside what I specified.
HOWEVER on reverse curls GET technical, and ONLY do the Bottom 3/4 range. Start with arms extended and curl up to where forearms go just above parallel, them harness the weight on the way down and repeat till fatigued
SLDL and Leg Pres:
Because our Leg press machine sucks, you suggested to me wide stance free weight squat. For both of these exercises (squat/SLDL), I'm feeling it in hamstrings, but not significantly in the glute. One difference I've noticed in this routine compared to previously is that I'm hitting the quads/hamstring much more (based on DOMS and general observation), but feeling much less DOMS in the glutes, whereas previously with lunges for eg I felt massive DOMS in the glutes. Is there anything I can do here to hit the hams/glutes equally?
SMITH MACHINE SQUATS:
- I see some people in the gym with their feet in front of the bar. I seem to feel more quad tension with feet close together, and feet directly under the bar? Is this preferable? Any preference re: too positions (would an inwards toes result in "prettier" definition (i.e., outer quad)
Just use a Neutral foot position and Normal Body position to Mimic what is your normal mechanics in nature.
This is what will give your legs the look as size and you repeat over and over the natural plane of motion under progressive resistance over time
SLDL
- When I'm at the top of the movement, with my back completely erect, should I lean back to flex my lower back further?
NO, just repeat while harnessing the weight down. Some lifts like Dl's and Barbell curls are what i a call a "just do them exercise" they lend themselves to pretty even load so long as the lift is done with the form we use.
Shoulder Press (smith machine)
- how wide should our grip be?
- do we flex with our arms completely straight, or 3/4's straight, and don't complete the motion
~Then Slowly descend to Arm break just Parallel
~Always Start Smith Military from the Top fully Extended position.
~Then Slowly descend to Arm break just Parallel
~Harness the weight with the delt and push through just short of lock out, hence my 3rd or 5th range of motion terminology.
~Always have the bar in front of you for front presses vs Behind the neck
~ As you get fatigues GET MORE STRICT instead of cheating.
~ The Strength curve for this lift rises fast in time, so while you may do girls weights at first you will get Strong FAST in it.
And the Delts just keep growing and growing
By parallel, do you mean my bicep/tricep portion of my arms will be parallel to the floor? For me, that would mean bringing the barbell to around eye level. Is that correct? If not, what do you mean by parallel then? Thanks.
yes, the bicept and tricept line will be parallel to the ground. Just around eye level.
si, I go just before parallel for these.
your a natural
Yes Just Below Parallel
ALL PURE PECTORAL contraction this way
~ Desmond you WILL not over train, the front delts will effortlessly take the load do to ALREADY being tired from the previous Chest Lifts
~Use a Neutral Grip ( normal ) and Just press!and press till Burn out.
~ON the back day you will get extra Trap development and side deltoid do to how the exercise flow.
~If anything in part 1 your rotator will get STRONGER or heal if previously compromised
i dont know what im doing wrong but after my first refined chest workout, im not sore at all! i dont know how im not sore after 7 sets of incline DB Press but some how im not, also today i did the leg workout and i powered threw it alot easier then last week, iv kept strict form and iv been focusing on the muscle that im working and squeezing at the top of the all the movements. maybe im not doing enough weight? but during the workout i feel like im going to die so i dont know how im going to up the weight at this stage. i have been taking in about 15g of glutamine and about 10g of creatine everyday so that may be one of the reasons. another thing is i just changed my pwo stimulant and it works a hell of alot better. is it possible that all my other workouts were not being preformed to the fullest because of a bad stimulant? but at first i was very sore... i mean like very very sore. but now im just not feeling it. i dont know what to do, let me know what u think
thanx
deezy
My recovery has greatly improved, but I'm very sore during the exercise. Body parts often feel as if they are on fire. But I'm fine by the time the next workout is due now
for Some Glutamine Is incredibly powerful as is Creatine
just go with it, you will get bigger, you dont need to be sore
![]()
Tricep Push down:
Hey Omega, I'm not sure if I'm doing these right, because I feel less of pump/soreness in my tris than anyting of ur routine.
.

Phase 2 lifting:
(1)
Had PM u about this Omega, but thought I'd add it here just in case others knew the answer.
For the 3 rep exercises in stage 2, is it meant to be 2/1/2 rep speed, or quicker. There is a reference in your PM to me stating the program that it may be quicker but it is ambiguous.
I guess I'm think about this most for barbell rows, as done slowly the weight is quite low because of the top part.
(2) I note in your Dorian Yates deltoid training video, On a lot of the exercises he jerks the weight and rests at the bottom (e.g., lateral raises), even on the beginning reps. Did you intend for me to do them like this or are you merely referring to him as an example of negative training?
No do not exaggerate the point of flexing, it actually better in this case to only do the middle 3/4th range of motion to achieve constant tension
then the Muscle will fill in over time
Hi All -
Couple quick questions:
On the "side laterals" on back day - are these seated/bent over, to target rear delts, or standing, targeting side delts?
Side Delts. I use cables for this primarily but dumbells is equally good and from memory what was used in Phase One
With the reverse curls, is the target forearms or biceps?
Biceps
On the last set, the perform form to failure set - how are ya'll defining failure. Failure @ perfect form, or just complete failure?
Failure while maintaining form
Thanks
That form looks good with the flys. The only thing I note is they have adjusted the axis point down to about shouldert level. I like it a little higher and also have a slight forward lean into the fly. This way you can really squeeze your pecs at the end of the movement but the range of motion they are using is very good.
Also with dumbell flys they are an equally good exercise for chest development but I know Omega likes to work in more of an incline dumbell fly/press movement into an overall chest program so this way you take advantage of both the dumbells and cables.
I'm not sure of the actual exact angle Des for DB presses I use but set the bench so that when I am lying back and look into the mirror I am just able to see myself. I would think this would have to be pretty close to 30 degrees. 15 seems like it might be getting to flat.
.
2 quick questions:
(1)\ is it OK to wear a weights belt when doing SM press
This page contains mature content. By continuing, you confirm you are over 18 and agree to our TOS and User Agreement.
Please Scroll Down to See Forums Below 










