Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply
puritysourcelabs
UGL OZ
UGFREAK
napsgeargenezapharmateuticals domestic-supplypuritysourcelabsUGL OZUGFREAK

Slin pin and tren ace

T

testbaby25

New member
I can find a fairly recent post about injecting tren ace with a slin pin ED in the thighs. Would like to know how you draw with a slin pin, and if it is different than with larger gauges, as I have never used them before. Also, how do you inject it into the muscle with such a small needle, is the only way by pushing next to the injection spot with you finger? Thanks for the help
 
Back load the slin pin.....draw with a regular (18 g pin) and then pull the plunger out of the slin pin and push it into the back of the slin pin, than replace the plunger and expell air, then your good to go. As far as the thigh goes just pick a spot in the upper/outer portion and stick it deep and push it in....easy as pie
 
criffer said:
Back load the slin pin.....draw with a regular (18 g pin) and then pull the plunger out of the slin pin and push it into the back of the slin pin, than replace the plunger and expell air, then your good to go. As far as the thigh goes just pick a spot in the upper/outer portion and stick it deep and push it in....easy as pie
Click to expand...

It is easy and painless as pie. I actually draw with the slin pin also. 50mgsED I'm injecting. It doesn't take as long as I thought it would.
 
Anyone else using the slin pin?
Man I could have saved SO many scars in my glute had I known this.
It just seems too thick...Im defiantely gonna try it now

God Bless
 
criffer said:
Back load the slin pin.....draw with a regular (18 g pin) and then pull the plunger out of the slin pin and push it into the back of the slin pin, than replace the plunger and expell air, then your good to go. As far as the thigh goes just pick a spot in the upper/outer portion and stick it deep and push it in....easy as pie
Click to expand...



I do it the same way

RAdaR
 
Wow, I can't believe i've been struggling all this time with loading by taking the needle off the 22G loader, sticking the slin pin in the hole, and drawing up the amount I wanted. I stopped using the slin pin to draw because it dulls it and hurts like hell. That pulling the plunger out and filling thing is the way to go... Thanks! :)
 
Does using a Slin really hurt less than a 25g pin? Is it worth all that work? I mean I have done 3 cycles of Tren ED and always used 25g (different lengths for spot injects)
 
bascally
Only1eagle said:
Does using a Slin really hurt less than a 25g pin? Is it worth all that work? I mean I have done 3 cycles of Tren ED and always used 25g (different lengths for spot injects)
Click to expand...


Basically painless ,use it on small muscle groups, bis,tris, quads (top)inj.
forarm...etc.


RADAR
 
Nice....I never thought of using a slin pin for regular injections....would it be fine for a delt injection as well?
 
I'm going to be doing 50mgs of tren and 50mgs of prop ED will this flow threw a smaller pin like a slin? Slin pins are around 29g right? This would make me feel alot better know I can do this and steer away from some pain.
 
Only1eagle said:
Does using a Slin really hurt less than a 25g pin? Is it worth all that work? I mean I have done 3 cycles of Tren ED and always used 25g (different lengths for spot injects)
Click to expand...

It takes only a couple of minutes to load up a weeks worth of pins...and you get an EXACT measurement. And shooting through a slin is simply a good time...no pain - just good clean fun.
 
criffer said:
Back load the slin pin.....draw with a regular (18 g pin) and then pull the plunger out of the slin pin and push it into the back of the slin pin, than replace the plunger and expell air, then your good to go. As far as the thigh goes just pick a spot in the upper/outer portion and stick it deep and push it in....easy as pie
Click to expand...

Im sorry bro..you lost me on that one...I want to try the slin pin since my next cycle will be with tren...
 
Since slin pins on Getpinz are 29gx1/2 are they long enough to get into say your quads, delts, bi's,tri's and so on? Also it says that you cannot remove needle to replace. Sorry guys I'm sort of lost and like i said this could save me some pain with my ED injects.
 
swordfish151 said:
Im sorry bro..you lost me on that one...I want to try the slin pin since my next cycle will be with tren...
Click to expand...

Sword - its a piece of cake. First draw up some tren with a regular syringe. Then remove the plunger from a slin pin. Squirt the tren into the slin pin (this is back loading cuz you are going through the back of the slin pin as opposed to through the needle). Carefully put the plunger back on. Not to far cuz some will come out the needle. Once the plunger is in a little you can invert the pin and expel the air. BOOOOM good to go!
 
axe3 said:
Sword - its a piece of cake. First draw up some tren with a regular syringe. Then remove the plunger from a slin pin. Squirt the tren into the slin pin (this is back loading cuz you are going through the back of the slin pin as opposed to through the needle). Carefully put the plunger back on. Not to far cuz some will come out the needle. Once the plunger is in a little you can invert the pin and expel the air. BOOOOM good to go!
Click to expand...

AAAAAHHHHHHHHH!!!!!!!!!!!! gotcha!!! Easy enough..i have never tried the slin pin method..but have known that Radar advocates it..i guess im stuck with the notion that all AAS is to be done Intramuscular...how can a slin pin even hit the muscle..seems more of a subq type of inject...but alot have sworn by it...how about adding prop to the mix (in the slin pin)? or would that be overkill?
 
its Intramuscular...the pin is 1/2" long which if you are lean will get in there for delts, tri's, bi's, and pecs. I always go with a 1 1/2" for glutes. Some guys when they hit quads will push in the skin with the index finger of their non injecting hand to be able to go a little deeper. I do not find it necessary. I have done quite a number of jabs this way and never had any issues at all (the gas always gets where it needs to go)
 
axe3 said:
its Intramuscular...the pin is 1/2" long which if you are lean will get in there for delts, tri's, bi's, and pecs. I always go with a 1 1/2" for glutes. Some guys when they hit quads will push in the skin with the index finger of their non injecting hand to be able to go a little deeper. I do not find it necessary. I have done quite a number of jabs this way and never had any issues at all (the gas always gets where it needs to go)
Click to expand...

What about adding prop to the mix?
 
Nevermind...it only (pin) comes in 1/2cc or 1cc...not enough...Guess i will stick with the regular 25G for my prop/tren cycle... :chomp:
 
steroid injections require deep intramuscular injections. fuck those teeny slin pins! leave them for newbies like DBBT! :)
 
yeah, that is a pretty good idea, i am using 23 x 1 inch now for glutes and delts, i will have to give this a shot.. , no pun intended LOL
 
I usually use 25gx1in for everything besides glutes. I dont see why I shouldnt use a 25g for glutes tho..hmmm... Since I use a 1in on 23g as well.... I was going to get 27gx1/2 for my tris and pec injects that should be good, but now slin pins seem so easy.
 
Only1eagle said:
bump for update on what else can go through a slin pin?
Click to expand...

Depends on the oil thats used, once heated Test will (certain brands, however i still recommend reg injs, i use slin pins when ed injs are required.
or sensitive areas like quads & Bis.

RADAR
 
Retabolil2 said:
steroid injections require deep intramuscular injections. fuck those teeny slin pins! leave them for newbies like DBBT! :)
Click to expand...




LOLOLOLOL!!!!!!!


RADAR
 
any good spot injection sites? has any1 tried prop through a slin pin with or without heating it up? was it slow to inject compared to tren?
 
k6jatu37 said:
any good spot injection sites? has any1 tried prop through a slin pin with or without heating it up? was it slow to inject compared to tren?
Click to expand...
its very individual. I was making 5cc of winny ed, 2.5cc in each shoulder and I used 25g needle for those injections, just found painless area where I can inject without bleeding.
 
Retabolil2 said:
You americans are so sensitive :) I`m sure DBBT were crying when Russians won hockey vs USA :)
Click to expand...




yeah! you guys were using tren and Tbol ,all we had were prohormones! :chomp:

Smile! It makes others wonder what you're up to :)


RADAR
 
RADAR said:
yeah! you guys were using tren and Tbol ,all we had were prohormones! :chomp:

Smile! It makes others wonder what you're up to :)


RADAR
Click to expand...
canadian asses beaten as well! :)
Actually chinease guys have it all but were not born for hockey. DBBT said something about figure skating... Well as I can see americans cant play men games either! :) LOL All guys in NHL are from Canada, Czech republic and Russia :)
 
You must log in or register to reply here.

Similar threads

yankeedoodle
Approved Log Testosterone Equipoise Trenbolone NPP HGH Anavar Anadrol Return Log
Replies
33
Views
2K
ballin2504
ballin2504
hypogaeum
Approved Log Testosterone HGH Retatrutide Log - Sponsored by UGL OZ
Replies
16
Views
996
the_alcatraz
the_alcatraz
R
masteron, test and tren ready for it
Replies
19
Views
3K
25homes
25homes
Fella Finn
Approved Domestic Supply FEATURED Product Beligas Test/Tren/Bold Blend 400mg/ml
Replies
9
Views
1K
zedhed
zedhed
yankeedoodle
Approved Log Yankees 2025 First Cycle Log
Replies
57
Views
7K
RoySimpson
RoySimpson
Top Bottom