Please Scroll Down to See Forums Below Hey I was just wondering if anavar could be made to be injectable. Using a simple injection kit and some anavar I would think its possible. It seems there are no noticeable side effects, and being that most of the drug is lost through the liver wouldnt it make sense that one would get better reults with less tabs. And being that that average cost of one tab is almost $1.50, you could take half as much and it would last twice as long. Please give me your two cents. It would be appreciated. I would like to know what you guys think.
Making Anavar Injectable?
- Thread starter QuikFx
- Start date
Injectible var and anadrol were made in the mid-80's by an underground lab in mex (I can't really confirm it but I've heard enough about it). Everyone praised the products and results.
I've been interested for a while just from a curiosity standpoint. Someone on Animal's board or here was considering doing it with var powder. I wonder if he ever did.
I've been interested for a while just from a curiosity standpoint. Someone on Animal's board or here was considering doing it with var powder. I wonder if he ever did.
I was thinking about this mainly because of the costs. If 1 tab at 5mgs is about $1.50 and you need 30 mgs a day thats $9.00 per day or about $500 - $600 for a cycle of anavar. If you could inject it you would only need about half that for acycle. Because the liver would keep at least half from getting to your receptor sites? Let me know your thoughts.
The Almighty
New member
I believe BigAndy69 is working on that as we speak, so it may be in your best interest to pm him.
It is possible and probably would be a much more potent form. As every one knows the Bioavailability is almost 100% with injection compared to 25-50% with orals.
You can not make it liquid var. from pill or caps. You need USP grade powder. If you have the powder you can use Animals U100 kit. That’s 100 mg/ml.
You can not make it liquid var. from pill or caps. You need USP grade powder. If you have the powder you can use Animals U100 kit. That’s 100 mg/ml.
Fukkenshredded
New member
Andy is going to have his work cut out for him...there are some stability issues with anavar that make an injectable less than practical. Not impossible, mind you...just difficult.
I looked at it while back, but I don't have the hormone to spare on experimentation.
Like I said, it ain't easy to make an injectable that will keep. Andy, feel free to email me for particulars.
I looked at it while back, but I don't have the hormone to spare on experimentation.
Like I said, it ain't easy to make an injectable that will keep. Andy, feel free to email me for particulars.
FS is right on the money...this is extremely complex. It's getting very frustrating, I've got 5grams sitting here that I can't use.
I don't know if I trust A's kit; the magic solution may destroy the var.
The more I read about this, the more I realise how much more potent an injectable Ox would be. I had concerns that I would need to inject twice a day, but it turns out that the Ox would be released at a much slower rate, so once a day is sufficient.
Hopefully, I'll find a way to get 100mg/ml, and I will shot 75mg a day, with 1/4cc-1/2cc of Sterile oil. Hopefully, the oil will help wilth the sustained release.
Anavar is not soluble in oil and is an extremely fragile substance.
FS, I may email you regarding this issue. Thanks.
I don't know if I trust A's kit; the magic solution may destroy the var.
The more I read about this, the more I realise how much more potent an injectable Ox would be. I had concerns that I would need to inject twice a day, but it turns out that the Ox would be released at a much slower rate, so once a day is sufficient.
Hopefully, I'll find a way to get 100mg/ml, and I will shot 75mg a day, with 1/4cc-1/2cc of Sterile oil. Hopefully, the oil will help wilth the sustained release.
Anavar is not soluble in oil and is an extremely fragile substance.
FS, I may email you regarding this issue. Thanks.
The U100 kit will work. The flip side is that the liquid is unstable and you can't let it sit or it will degrade rapidly. Also temp control and light exposure are issues. Must be kept in cool dark place. I think I explored this issue a while back and I got slammed on this board. As mentioned above you might want to check the chick board. A couple of them responded to my thread that had done it before because of digestive problems. They seemed to have some positive results. You don't have to blow the whole 5g's at once. Why not try 1 or 2 and see how it works.
I'm not sure a oil/BA kit would work. Oxandrolone is soluble 1gm in 57ml of ethanol. IF its solubility in BA is similar, that would only allow about 20mg in 1ml of BA. About the most BA a person can handle is 1 part in 10 in oil (a 10cc vial of oil with 1cc of BA). So a 1cc injection of such a solution would only yield 2mg anavar.
myasshurts
New member
I've read reports that say it can't be done. Don't remember where though...Something about anavar being so unstable.
Re: Dbols?
You can get Dbol powder no need for pills. The fillers in the pills are not meant for injection.
It would still be toxic to the liver, it's the same molecular compound; you are just changing the physical state of the chemical not the molecular state.
MrDbol said:
You can get Dbol powder no need for pills. The fillers in the pills are not meant for injection.
It would still be toxic to the liver, it's the same molecular compound; you are just changing the physical state of the chemical not the molecular state.
Well, you could dissolve it in chloroform, but I'm not sure that would be real smart to inject:
Chemical Name:
17beta-Hydroxy-17alpha-methyl-2-oxa-5alpha-androstan-3-one
Molecular Formula: C19H30O3
Molecular Weight: 306.4
3.3 Physical properties
3.3.1 Colour
White
3.3.2 State/form
Solid-crystal
3.3.3 Description
Soluble 1 in 5200 of water, 1 in 57 of alcohol,
1 in 69 of acetone, 1 in less than 5 of chloroform,
and 1 in 860 of ether.
Chemical Name:
17beta-Hydroxy-17alpha-methyl-2-oxa-5alpha-androstan-3-one
Molecular Formula: C19H30O3
Molecular Weight: 306.4
3.3 Physical properties
3.3.1 Colour
White
3.3.2 State/form
Solid-crystal
3.3.3 Description
Soluble 1 in 5200 of water, 1 in 57 of alcohol,
1 in 69 of acetone, 1 in less than 5 of chloroform,
and 1 in 860 of ether.
Delinquent
Well-known member
So are you guys saying that I pretty much destroyed the var I put in propylene glycol????
Fukkenshredded
New member
You want injectable D-bol? How about equipoise?
Delinquent
Delinquent i think the Prop Glycol is ok for oral(thats what ive been hearing anyway).....but not inject. I hope it is stable in PG for oral b/c that is what was my original plan. If not i have a lot of PG that i dont need anymore. Bump just to be safe. Ox suspended in PG is stable right? and for how long(2 yrs?)...? thanks
-Soma
Delinquent i think the Prop Glycol is ok for oral(thats what ive been hearing anyway).....but not inject. I hope it is stable in PG for oral b/c that is what was my original plan. If not i have a lot of PG that i dont need anymore. Bump just to be safe. Ox suspended in PG is stable right? and for how long(2 yrs?)...? thanks
-Soma
The powder does exist. I know a source that gets it from time to time. Yes, "Animals" U100 kit will work. It will make 100mg/ml anavar shot. 1/2 cc e/d looks real good. I am waiting on some powder in a few weeks. I hope it works thats all I know. Water base mix just like winnie.
Megadeth1
Megadeth how do you know animals U-100 kit will work? Everyone is saying how unstable the OX molecule is- it will prob (it will)work with USP winny and d-bol but how do you know it will work with OX? I'd love to do inject but dont wanna mess the product up and throw all my $$ in da pooper.
-Soma
Megadeth how do you know animals U-100 kit will work? Everyone is saying how unstable the OX molecule is- it will prob (it will)work with USP winny and d-bol but how do you know it will work with OX? I'd love to do inject but dont wanna mess the product up and throw all my $$ in da pooper.
-Soma
