A Gram Of Powder =???

[blut wump]

i'll do that can i cap the powder and eat it though?

Did you miss post #32?

 

[donmcgowen]

O.K. Here it is. The answer to all your problems. Go to google and type Cap m' Quik. BUy it for $15. But some empty #0 caps from health food store. Put 50 caps in Cap m' Quik, the big half of the capsule. Meaure 19 grams of Dextrose, pour in a baggy, put in 1 gram of Anavar or any other substance, mix well. Scoop out the mixture onto the caps, spread evenly so it's even with the top. THat should be all of your powder. Put the other end of the caps on. That will give you 50 20mg caps of Var. Very simple. If you want 10mg caps, just use 39 grams of Dextrose or protein powder and 1 gram of Var. Capping takes just about as long as making a suspension, and it's a lot easier to take that way.

 

[drrman]

O.K. Here it is. The answer to all your problems. Go to google and type Cap m' Quik. BUy it for $15. But some empty #0 caps from health food store. Put 50 caps in Cap m' Quik, the big half of the capsule. Meaure 19 grams of Dextrose, pour in a baggy, put in 1 gram of Anavar or any other substance, mix well. Scoop out the mixture onto the caps, spread evenly so it's even with the top. THat should be all of your powder. Put the other end of the caps on. That will give you 50 20mg caps of Var. Very simple. If you want 10mg caps, just use 39 grams of Dextrose or protein powder and 1 gram of Var. Capping takes just about as long as making a suspension, and it's a lot easier to take that way.

This isn't correct my friend, you don't know the differences in the density of the different powders. one gram of one thing can weigh considerably different and take up a much different volume than one gram of another thing.

here is a link for you to do it RIGHT.
http://www.elitefitness.com/forum/showpost.php?p=6188236&postcount=17

cut and paste for you:

yes, if i undestand your question right....if you scales are only accurate to .01g as most cheaper ones are you would be best to fill up 50 capsules with filler powder, then dump it all out on the scales cap by cap....this is the weight of the filler powder that will fill up all the capsules.....divide that by 50 or however many are in the control group....that will be the weight each capsule contains of filler powder

now you would need to do the same with the powder you want to cap....find out how much one capsule will hold of it doing the same thing. here is where scales to the .001g or mg work best, you don't have to use so many in your control group.

now you have to figure out a ratio of difference for the amount of volume the filler powder contains per weight versus the powder you are capping....for example anavar weighs much more per cap than say winny will.

say your filler powder is .250g per capsule, and your powder is .350g per capsule, and you have 50 capsules and you are making 50mg/capsule

now 50X.250 is 12.50 grams total powder, but you are going to add .050 of another substance....

.050X50 = 2.5g

you would normally think 12.5-2.5 to get how much filler, but the volume of filler is .250g/capsule and the volume of powder is .350g/capsule, so the powder in question is denser than the filler so that has to be taken into account


i do it like this

.250/.350 is .71 so the filler powder is only 71% of the same comparable volume of the powder you are making. or a 29% difference, or 1-.71 or 29, use this number in the following

so now do 12.5g - [2.5 + (2.5 X (1-.71))] = 12.5-3.225 = 9.275g filler powder

now add 2.5g powder to that 9.275 and mix like hell, this will then fill all the capsules evenly

 

[swolenole]

This isn't correct my friend, you don't know the differences in the density of the different powders. one gram of one thing can weigh considerably different and take up a much different volume than one gram of another thing.

here is a link for you to do it RIGHT.
http://www.elitefitness.com/forum/showpost.php?p=6188236&postcount=17

cut and paste for you:

yes, if i undestand your question right....if you scales are only accurate to .01g as most cheaper ones are you would be best to fill up 50 capsules with filler powder, then dump it all out on the scales cap by cap....this is the weight of the filler powder that will fill up all the capsules.....divide that by 50 or however many are in the control group....that will be the weight each capsule contains of filler powder

now you would need to do the same with the powder you want to cap....find out how much one capsule will hold of it doing the same thing. here is where scales to the .001g or mg work best, you don't have to use so many in your control group.

now you have to figure out a ratio of difference for the amount of volume the filler powder contains per weight versus the powder you are capping....for example anavar weighs much more per cap than say winny will.

say your filler powder is .250g per capsule, and your powder is .350g per capsule, and you have 50 capsules and you are making 50mg/capsule

now 50X.250 is 12.50 grams total powder, but you are going to add .050 of another substance....

.050X50 = 2.5g

you would normally think 12.5-2.5 to get how much filler, but the volume of filler is .250g/capsule and the volume of powder is .350g/capsule, so the powder in question is denser than the filler so that has to be taken into account


i do it like this

.250/.350 is .71 so the filler powder is only 71% of the same comparable volume of the powder you are making. or a 29% difference, or 1-.71 or 29, use this number in the following

so now do 12.5g - [2.5 + (2.5 X (1-.71))] = 12.5-3.225 = 9.275g filler powder

now add 2.5g powder to that 9.275 and mix like hell, this will then fill all the capsules evenly

damn good post bro....

 

[bmcadoo44]

cocaine and steroids... not a good mix lol