Test Powder

[Kabeetz]

I don't mean to sound like a complete rook or anything but here goes...

imagine a friend who is employed at a hospital gave another friend a large vial full of a powder form of test.

How could this typically be incorporate into a safe, effective cycle? I don't mean to be vague and ignorant.. I have read this board frequently but don't have a lot of experience with this sort of stuff (i.e. is test even usually IN powdered form, what's a standard dosage, how is it taken (snorted, mixed via water, etc.?)

Any info, advice or any points to relevant research or stickies would be humbly appreciated.

Thanks.

 

[wayneboard1]

I don't mean to sound like a complete rook or anything but here goes...

imagine a friend who is employed at a hospital gave another friend a large vial full of a powder form of test.

How could this typically be incorporate into a safe, effective cycle? I don't mean to be vague and ignorant.. I have read this board frequently but don't have a lot of experience with this sort of stuff (i.e. is test even usually IN powdered form, what's a standard dosage, how is it taken (snorted, mixed via water, etc.?)

Any info, advice or any points to relevant research or stickies would be humbly appreciated.

Thanks.

Ask your friend what type of powder it is and how much do you have? Here are some basic instructions assuming you want to make just basic test e or c injectible test. FYI...DO NOT SNORT IT. LOL. Classic.

--------------------------------------------------------------------------------

Test Enanthate 5 gram conversion

Needed
5 grams test E
Benzyl Alcohol 1ml 5% BA
15.25 ml sesame oil
Syringes 3cc & 5/10cc
18 or 20 guage needles
Vial
Sterile Vial
Whatman sterile filter

1. Weigh out 5 grams of powder.
2. Place powder in vial.
3. Add BA to the vial.
4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
7. Place a 18 or 20 gauge needle in the sterile vial attach whatman sterile filter.
8. Place another needle in the sterile vial to relieve the pressure.
9. Draw out solution with a syringe, run though whatman filter.
10. Take other syringe with 2ml oil, run through whatman into solution.

Makes 20ml @ 250mg/ml


Test Enanthate 10 gram conversion

Needed
10 grams test E
Benzyl Alcahol 2ml 5% BA
30.5 ml sesame oil
Syringes 3cc & 5/10cc
18 or 20 guage needles
Vial
Sterile Vial
Whatman sterile filter

1. Weigh out 10 grams of powder.
2. Place powder in vial.
3. Add BA to the vial.
4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
7. Place a 18 or 20 gauge needle in the sterile vial attach whatman sterile filter.
8. Place another needle in the sterile vial to relieve the pressure.
9. Draw out solution with a syringe, run though whatman filter.
10. Take other syringe with 2ml oil, run through whatman into solution.

Makes 40ml @ 250mg/ml


Test Cypionate 5 gram conversion

Needed
5 grams test c
Benzyl Alcahol 1ml 5% BA
15.25 ml sesame oil
Syringes 3cc & 5/10cc
18 or 20 guage needles
Vial
Sterile Vial
Whatman sterile filter

1. Weigh out 5 grams of powder.
2. Place powder in vial.
3. Add BA to the vial.
4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
7. Place a 18 or 20 gauge needle in the sterile vial attach whatman sterile filter.
8. Place another needle in the sterile vial to relieve the pressure.
9. Draw out solution with a syringe, run though whatman filter.
10. Take other syringe with 2ml oil, run through whatman into solution.

Makes 20ml @ 250mg/ml


Test Cypionate 10 gram conversion

Needed
10 grams test c
Benzyl Alcahol 2ml 5% BA
30.5 ml sesame oil
Syringes 3cc & 5/10cc
18 or 20 guage needles
Vial
Sterile Vial
Whatman sterile filter

1. Weigh out 10 grams of powder.
2. Place powder in vial.
3. Add BA to the vial.
4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
7. Place a 18 or 20 gauge needle in the sterile vial attach whatman sterile filter.
8. Place another needle in the sterile vial to relieve the pressure.
9. Draw out solution with a syringe, run though whatman filter.
10. Take other syringe with 2ml oil, run through whatman into solution.

Makes 40ml @ 250mg/ml

 

[Kabeetz]

The amount is large... in other words a gigantic man sized bucket. May I ask what the difference between a basic test e or a c injectible test is (whether it be results or effects) and what the best way to maximize such results and minimize such effects would be?

I have been offered and have researched deca, d-bol, anavar and winnie in the past but I am really unfamiliar with test outside of reading it in people's stacks on ef.


I appreciate those "recipes" and I definitely plan on putting one to good use in the near future.. good look.

Ask your friend what type of powder it is and how much do you have? Here are some basic instructions assuming you want to make just basic test e or c injectible test. FYI...DO NOT SNORT IT. LOL. Classic.

--------------------------------------------------------------------------------

 

[turbogreek]

I don't mean to sound like a complete rook or anything but here goes...

imagine a friend who is employed at a hospital gave another friend a large vial full of a powder form of test.

How could this typically be incorporate into a safe, effective cycle? I don't mean to be vague and ignorant.. I have read this board frequently but don't have a lot of experience with this sort of stuff (i.e. is test even usually IN powdered form, what's a standard dosage, how is it taken (snorted, mixed via water, etc.?)

Any info, advice or any points to relevant research or stickies would be humbly appreciated.

Thanks.

basically...by finding out what kind of test it is it allows you to figure out how to use it. it'll let you plan a cycle.

the most popular tests are:
enanthate, cypionate & propionate.

there are others too but if he got it from a hospital...then chances are it's 1 of those.

also...buy a nice little milligram scale. if you have a bucket of test...you may wanna break it down into smaller portions so that you can convert it to an injectable.

or...you can just send it to me (a fellow greek like yourself...and i don't live far from you) and i'll take care of the whole process for you only for a little tax of the final product

 

[bilter]

basically...by finding out what kind of test it is it allows you to figure out how to use it. it'll let you plan a cycle.

the most popular tests are:
enanthate, cypionate & propionate.

there are others too but if he got it from a hospital...then chances are it's 1 of those.

also...buy a nice little milligram scale. if you have a bucket of test...you may wanna break it down into smaller portions so that you can convert it to an injectable.

or...you can just send it to me (a fellow greek like yourself...and i don't live far from you) and i'll take care of the whole process for you only for a little tax of the final product

the tax man cometh!!!
I would convert just for the fun of it. I love chemistry 101

 

[Workout King]

if you get it from a hospital or pharmacy in powder form, its most likely test base. Meaning test with no ester. They use it to make andro gel in compounding pharmacies. So, if it is test base, you can make a transdermal, or a suspension.

 

[Crappiie]

Interesting read.......I didnt know any of this. Do you guys think that a medic in the army has access to this powder???

 

[Workout King]

Probably not, as i said, test base is used to make a transdermal, called andro gel, tho it might have other names associated with it, and as far as i know its mainly just used in very low doses for women mostly who need just a small amount of added test, usually for sexual function. Though I'm sure it has other uses too, I'm pretty sure this is the main one.

 

[turbogreek]

the tax man cometh!!!
I would convert just for the fun of it. I love chemistry 101

 

[1392477]

If it is in fact Test base you can make transdermal testosterone with it quite simply. I have a recipe for making test gel at 100 mg / ml for daily application with 60%+ absorption rate. With daily application you would be getting approx 420 mg per week into the blood stream.

Before you can do anything you need to find out what exactly you've got.