Test Enanthate Cycle

[SA80]

This will be my first Test E cycle. Should i take 250mg or 500mg each week? Is Norma a good product of Test E? I was thinking of a 12 week cycle...1-4 dbol 25mg and 8-12 winni 50mg tabs. I have my PCT lined up.
I wanted to inject in my quad......what needle size would be good?


Stats: 5 8", 191ibs, 9% BF, 38 yrs old.

 

[racoon_city]

do 500 mg weekly. 23g dart

 

[SwolK]

That looks like a great cycle, and it looks like you really did you research.
do 500mg of test E per week(2 shots mon and thurs)

for quad: 23 ga 1 inch,

make sure you draw with a larger needle, then put on the new 23ga to shoot

good luck

 

[bigcountry61]

Add some arimedex ( .5 mgs ed ) to ur cycle since ur using d-bol. i am on a very similar cycle rite now. just higher dosage.that cycle should work great for u. keep us posted

 

[SwolK]

i forgot, arimedex as bigcountry said

 

[Harder N Leaner]

My first, and second test e cycle i didnt exceed 375mg per week and got the results i wanted. I personnaly dont think you need 500 a week. I would go with 250 a week to start. Or you could split the difference... if 1cc=250mgs. do 1.5cc's=375....But thats just my opinion.

 

[needtogetaas]

This will be my first Test E cycle. Should i take 250mg or 500mg each week? Is Norma a good product of Test E? I was thinking of a 12 week cycle...1-4 dbol 25mg and 8-12 winni 50mg tabs. I have my PCT lined up.
I wanted to inject in my quad......what needle size would be good?


Stats: 5 8", 191ibs, 9% BF, 38 yrs old.

with thos stats and the fact that is youre first cycle 250 week should be good for you.just reamaber to eat bro.

 

[SA80]

thanks for all your input fellas.

 

[letsrun4it]

Here is what I don't get about injecting: I thought the reason for the draw was to make sure you were in the right spot, well then putting a new needle in and injecting and you're not longer in the same spot. Help me clear this up if you can.

I'm about to run a Test-C 500mg/week cycle. I figure I'll inject in the butt.

 

[bb079]

This will be my first Test E cycle. Should i take 250mg or 500mg each week? Is Norma a good product of Test E? I was thinking of a 12 week cycle...1-4 dbol 25mg and 8-12 winni 50mg tabs. I have my PCT lined up.
I wanted to inject in my quad......what needle size would be good?


Stats: 5 8", 191ibs, 9% BF, 38 yrs old.

i will start my next in a couple of months and it looks just like yours, except im throwing in some test prop at the end, wk 10-12. i normally inject glutes and delts, but 23g worked fine when i did hit quads. just remember to eat and sleep like a mofo. and let us know the end results. peace.

 

[utahdiesel]

make sure you draw with a larger needle, then put on the new 23ga to shoot

good luck

This is not imperative, it will just take longer with the 23 gauge to load.

 

[SwolK]

This is not imperative, it will just take longer with the 23 gauge to load.

not imperative? if using a multi use bottle and not amps it is! you do not want to poke through a rubber top, which will dull the needle and possibly pick up somthing dirty, and then inject yourself with this same needle. I agree that if using an amp it may not be necessary, but if using a multi use bottle it certainly is.. and i think you will find that to be the general concensus.

 

[SwolK]

Here is what I don't get about injecting: I thought the reason for the draw was to make sure you were in the right spot, well then putting a new needle in and injecting and you're not longer in the same spot. Help me clear this up if you can.

I'm about to run a Test-C 500mg/week cycle. I figure I'll inject in the butt.

bro when we say draw, we mean drawing the substance out of the vial into the syrange

 

[UFC22]

If I were you I would run your cycle like this:
1-12 test E 500mgs/EW
1-4 dbol
AND instead of 8-12 winny do:
8-14 OR 10-14 - 50mgs/ED

The reason that you should extend your winny two weeks past your last test injection is so you wont have any down time. After your last winny pill you can start PCT the following day instead of stopping everything on week 12 and waiting 2 wks with the test tappering and nothing going on.

As for needle size with quads I go with the 25gx1in works like a charm! I buy 20gx1.5in(needle with syringe) to draw with and 25gx1(pin only) to screw on after and shoot with. Injections do not take long with 25g for me and feels alot better than a 23g.

 

[utahdiesel]

not imperative? if using a multi use bottle and not amps it is! you do not want to poke through a rubber top, which will dull the needle and possibly pick up somthing dirty, and then inject yourself with this same needle. I agree that if using an amp it may not be necessary, but if using a multi use bottle it certainly is.. and i think you will find that to be the general concensus.

Sorry, let me clarify. I meant it's not imperative to use a different SIZE needle. It is imperative to use one needle for load, one for injection. We're on the same page bro, chill.

 

[SwolK]

Sorry, let me clarify. I meant it's not imperative to use a different SIZE needle. It is imperative to use one needle for load, one for injection. We're on the same page bro, chill.

its cool. we are on the same page now

 

[southpaw45]

I'm lost what page are we on?

Haha JP

Your cycle looks solid. I would go with 500mg/week with adex.

 

[camshaft]

bros im injecting test e with a 22ga into my glute and its hard to depress the plunger as it is. i couldnt see using a 23ga!

 

[SwolK]

bros im injecting test e with a 22ga into my glute and its hard to depress the plunger as it is. i couldnt see using a 23ga!

23 works. just have to be patient. I try to minimize the scar tissue being built up, so I go with as small as possible

 

[bb079]

bros im injecting test e with a 22ga into my glute and its hard to depress the plunger as it is. i couldnt see using a 23ga!

personally i have never had any trouble injecting test e with a 23g pin. i normally wrap my vial in an electric heating pad for about five minutes to get the oil heated up and it injects w/o any trouble.

 

[alcatraz1662]

As for needle size with quads I go with the 25gx1in works like a charm! I buy 20gx1.5in(needle with syringe) to draw with and 25gx1(pin only) to screw on after and shoot with. Injections do not take long with 25g for me and feels alot better than a 23g.

Lol, yeah....I used a 23g pin to draw and inject for my first cycle and it was no big deal....then i tried a 25g and it was about the same. Some people have a hard time pushing with a 25g, but for me it was fine.

 

[SwolK]

good idea bb