Syringe Jamming (Winstrol)

[ecko4544]

I've been injecting .5ml of 100mg SydGroup Winstrol ED and I've been noticing the past to days after I aspirate, the plunger on the syringe will not go in, I took it out to see what was wrong and I had to apply a lot of extra force before the Winny came shooting out, anyone know why this is happening? Where is it getting clogged?

 

[Zell959]

Sounds like the suspesion particles are blocking the needle. What guage you using?

 

[hrlydvdson1]

a 22 gauge should push motor oil out bro

 

[Makavelli]

I've been injecting .5ml of 100mg SydGroup Winstrol ED and I've been noticing the past to days after I aspirate, the plunger on the syringe will not go in, I took it out to see what was wrong and I had to apply a lot of extra force before the Winny came shooting out, anyone know why this is happening? Where is it getting clogged?

SydGroup's suspensed AAS, such as winstrol and test suspension, are notorious for having large particles. The only thing that you can do is mix it with an oil and use a 22 g. I had an athlete getting ready for a show using their suspension and we had to mix it with tren in order to get it through the pin.

 

[TheRide]

I've been injecting .5ml of 100mg SydGroup Winstrol ED and I've been noticing the past to days after I aspirate, the plunger on the syringe will not go in, I took it out to see what was wrong and I had to apply a lot of extra force before the Winny came shooting out, anyone know why this is happening? Where is it getting clogged?

Stanozolol particles are probably jamming in the pin. Make sure it's mixed well before pulling. Had similar expir. w/QV.

Another reason to use Zambon... NEVER clogs (atleast for me)

 

[Dr. JK]

Add some B-12 to the mix!!!!!!!!!!

 

[n1tro]

I've been there bro. Usually the 23G should do the job just fine. It can be a little scary when your forcing the injection then all of a sudden the whole fuckin shot shoots in. Like winstrol wasn't painful enough without a one second injection!

 

[LVTitan]

SydGroup's suspensed AAS, such as winstrol and test suspension, are notorious for having large particles. The only thing that you can do is mix it with an oil and use a 22 g. I had an athlete getting ready for a show using their suspension and we had to mix it with tren in order to get it through the pin.

i was gonna start in on you about the oil/water mix, but we've had that conversation in a different thread.. lol
just my .02 never mix water and oil based gear in the same shot ... now return to ur regularly scheduled thread.
titan

 

[Zell959]

I had a similar problem with Stan QV 50. I found that using a 20g to repeatedly suck up 3-4 ml then shooting back into the bottle with some force broke up, or seemed to, the particles as my shots were always smooth after I started doing that.

 

[hrt39]

22g is absolute smallest to use on winny. I usually use 21g with winny, just so I only have to do it once.

 

[Breeze]

Try running the loaded pin under hot tap water for a minute. Warming it up will thin it out a little, injects easier.

 

[n1tro]

22g is absolute smallest to use on winny. I usually use 21g with winny, just so I only have to do it once.

I dont know what kind of winny you've been using but you can use a 23G for most. I havn't tried it yet but they are claiming the (relatively) new syrus winstrol can pass through a 25G pin. I'll be getting my hands on some of it soon enough.

 

[LVTitan]

I dont know what kind of winny you've been using but you can use a 23G for most. I havn't tried it yet but they are claiming the (relatively) new syrus winstrol can pass through a 25G pin. I'll be getting my hands on some of it soon enough.

thats why zambons are the shit 25g no problem. as a matter of fact, the mex vet brand denkall will go thru a slin pin the powder is so fine.
titan