oil in slin needles

[gimmejuice]

My buddy was tellin' me that he used to shoot oil through slin needles. He's get the 1ml cases with 28-29 guage pins (5/8"). He's draw his gear out of the amps with a regular (23g) pin, pull the plunger out of the slin case and squirt the oil in, re-insert the plunger and shoot with that. It sounds kind of appealing when doing a lot of stabs, but do you guys think that 5/8" is deep enough for 1ml of oil? (assuming the stab is done somewhere with little fat)

thanx
GJ

 

[jstrong20]

I've done it with t200 in the quads with no problems but most recommend at least 1''.

 

[MaxBiceps]

it can be done, although waterbased suspensions go through the needle easier. One thing you could do is heat up the oil prior to injecting to allow it to flow throught the needle easier. (I have personally never done this with oil based gear)

 

[bigchewy]

i was also wondering the same thing ,is 5/8 in the shoulder's,tri's,bi's, deep enough? my friend just finished his test, tren cycle and got good results and was using 5/8 29g slin pin but i wanted to hear word from more people.

bigchewy

 

[orca]

You have to be carefull not to inject int subcuteneous fat, if your going to do it at least use an inch long.




ORCA

 

[gimmejuice]

Do they make a 1" slin pin? Where could I order it? Carecenter.com doesn't have them. I haven't checked Kroger yet..

thanx
GJ

 

[orca]

dont order them, just walk up to the pharmasist and ask for 1 inch slin pins.


ORCA

 

[chronicx357]

i work register at a pharmacy and they say that they need a prescription for needles