I'm searching for a 27g 3/4 inch needles....

[FknKnuckleHd]

I'm searching for a hundred or so 27g 3/4 inch needles and I've checked the popular websites that sell needles but I can't find that size. I don't care if they come with the syringes or not.......k to anyone that has an idea.

Thanks,
fkh

 

[Tryn2]

Could you get aways with a 29 slin ? I used 29 slin for tren last time, worked good...Quads and bi's...

 

[FknKnuckleHd]

Thats what I plan on using them for.

The only problem with the slin pins is that its a pain in the ass trying to get the tren into the needle. With a 27g I can swap needle heads, use a 18g to draw and the 27 to inject. Any advice???

 

[Tryn2]

True, I always ran hot water on the tren for a bit. Seemed to help.

 

[a-f-x]

how bout a 25ga 5/8"? thats pretty close... also there is 27ga 1/2" but i know you want to go just a little bit deeper...
http://www.gearboxinc.com/product_info.php?cPath=22&products_id=44

 

[Tryn2]

Shit I think I used 1/2's to , I wanted deeper next time....I hit it ed....

 

[FknKnuckleHd]

how bout a 25ga 5/8"? thats pretty close... also there is 27ga 1/2" but i know you want to go just a little bit deeper...
http://www.gearboxinc.com/product_info.php?cPath=22&products_id=44

I have a bunch of each of those. I also have a bunch of 25g 1 inch that I've started using with test but it takes forever to inject because of the length

But like you said I figured I should go deeper than 5/8 or 1/2 with tren since I use those for winy only......any thoughts on taking tren with such a short needle.....anyone????

 

[a-f-x]

this may sound retarded, but i can make a 1" needle go just as deep as a 1.5", i just press it in relatively hard when im injecting... i figure that i can get that extra depth from pushing the skin in.

 

[FknKnuckleHd]

this may sound retarded, but i can make a 1" needle go just as deep as a 1.5", i just press it in relatively hard when im injecting... i figure that i can get that extra depth from pushing the skin in.

It makes sense....i think we all kinda do that from just bearing down so hard....I know I do.

 

[dugie65]

i wouldn't

what if the needle breaks off? You have nothing to pull it out from.

 

[Tux]

I use 29g .5's for my tren injects now. If I do only 3/4 or 1cc at a time, I have no problems with that depth. I have very lean quads though. 25g 5/8 works fine too. I warm mine up a bit, takes maybe 20 seconds to do 1cc through a 29g. I just backfill the syringe, there's no real way around that.

 

[a-f-x]

i wouldn't

what if the needle breaks off? You have nothing to pull it out from.

... why the fuck would the needle break off?...

 

[martinbros]

i usually use 25 1ch, its weird i inject 3/4 of the way aspirate look down and its burried.

 

[dugie65]

... why the fuck would the needle break off?...

heard it happen to a lot of people, usually happens with the higher gauge needles, which is what we are dealing with my friend.

 

[FknKnuckleHd]

... why the fuck would the needle break off?...

Thank you afx and if I'm ever f'ing stupid enough to break a needle off in myself...well than I deserved it in the first place for being so ignorant.....this isn't my first day on the job.

 

[AAP]

Never heard of one breaking. You can grab those suckers with plyers and bend them - with much effort - but not break.

Anyway, I have ordered 27g in 1/2 inch, 1 inch, and 1.25 inch before. Though never seen them in 5/8th inch. You could get the 1/2 inch and push a bit deeper.

 

[TheAssholeFomerlyKnownAsDBBT]

Thats what I plan on using them for.

The only problem with the slin pins is that its a pain in the ass trying to get the tren into the needle. With a 27g I can swap needle heads, use a 18g to draw and the 27 to inject. Any advice???

pull the plunger completely out of the slin syringe, squirt in your dose into it with another syringe, put the plunger back in the slin pin and go...

 

[satchboogie]

i can score them where i live OTC no problem!

great for water based gear or b12.