How to draw from 2 vials

[CheckFire]

First time drawing from 2 separate vials into 1 syringe. How do I inject the air first into 2 vials without the air leaking out from the pressure? Thanks.

 

[Jbranken]

I've drawn from 3 different vials without pushing air into them. Just pin the stopper and pull the oil

 

[jcnuts]

First time drawing from 2 separate vials into 1 syringe. How do I inject the air first into 2 vials without the air leaking out from the pressure? Thanks.

Draw 1cc of air and inject in the first vial and draw out 1cc of the steroid and remove from the vial. Pull on the plunger where the top of the first compound is on 2cc and inject the 1cc of air into the next vial, just make sure you don't push the first compound into the second vial, then draw out that steroid til your total is a little over 2cc's. Remove from vial and your gtg.

~ JohnyCoolNuts ~

 

[koin]

My recommendation is to push oil into the first vial and don't worry about the 2nd. Don't want to be mixing stuff unintentionally. Next time you inject do them in opposite order and you'll be fine. I've honestly drawn 3/4 of a vial without putting any air in, in the past, don't stress it too much. The vials are stronger than you think.

 

[jcnuts]

My recommendation is to push oil into the first vial and don't worry about the 2nd. Don't want to be mixing stuff unintentionally. Next time you inject do them in opposite order and you'll be fine. I've honestly drawn 3/4 of a vial without putting any air in, in the past, don't stress it too much. The vials are stronger than you think.

I'm confused? Push oil where and do what? I just got a headache!

~ JohnyCoolNuts ~

 

[Jigga14]

Draw 1cc of air and inject in the first vial and draw out 1cc of the steroid and remove from the vial. Pull on the plunger where the top of the first compound is on 2cc and inject the 1cc of air into the next vial, just make sure you don't push the first compound into the second vial, then draw out that steroid til your total is a little over 2cc's. Remove from vial and your gtg.

~ JohnyCoolNuts ~

I think this post gives me a headache I can't even read all of it.

Op just pin and draw it isn't that complicated.

 

[jcnuts]

I think this post gives me a headache I can't even read all of it.

Op just pin and draw it isn't that complicated.

It's OK you'll learn. Just keep sounding out the letters. On second thought just take a couple ibuprofen and stfu.

~ JohnyCoolNuts ~

 

[stevesmi]

why is it a big deal if you get air in the syringe? has anyone ever died injecting air into themselves? i'm lost on this one.

headline news "Man dies from injecting air into body, tonight at 11"

 

[CheckFire]

I always leave A little bubble of air in The syringe so at the end of the injection, especially in the glutes where I can't see it as well, I hear a little fart, which is the little bubble of air going in, plus it clears out any residual oil from the needle.

 

[RickRock13]

Don't over complicate things. If you are drawing from two vials its not difficult. The main thing you want to avoid to draw easier is a vacuum in the vial. As an example, if I were doing one cc from each vial, I would start off by drawing two CCs of air into the syringe, and injecti one Cc of it into one of the vials, pull out, and inject the other cc into the second vial. At that point all the air should be pushed out of the syringe, and without pulling out of the second vial draw your one Cc of oil and then go back to the other vial and draw your second CC. Done.

Even though positive pressure in the vial makes it draw easier, if it releases the pressure in the second vial at least it won't have a vacuum and drawing will still be cake

 

[burnthiscorpse]

To each his own...but I don't inject any air. Just pin the vials and draw. Simple.

 

[stevesmi]

the air like RIck said should be pushed through so you get rid of the vacuum so its easy to push the oil through the needle once you inject. this is easy to do, just push through some oil before you go in and you will be fine

 

[ceo]

Don't over complicate things. If you are drawing from two vials its not difficult. The main thing you want to avoid to draw easier is a vacuum in the vial. As an example, if I were doing one cc from each vial, I would start off by drawing two CCs of air into the syringe, and injecti one Cc of it into one of the vials, pull out, and inject the other cc into the second vial. At that point all the air should be pushed out of the syringe, and without pulling out of the second vial draw your one Cc of oil and then go back to the other vial and draw your second CC. Done.

Even though positive pressure in the vial makes it draw easier, if it releases the pressure in the second vial at least it won't have a vacuum and drawing will still be cake

This is the correct way.

I don't know what the hell some of you are even talking about.

 

[burnthiscorpse]

I don't know what the hell some of you are even talking about.

lolol you read my mind bro.

 

[jcnuts]

To each his own...but I don't inject any air. Just pin the vials and draw. Simple.

All underground vials I can do that with but there is no way with my pharmaceutical Watson or Pfizer Test. You have to put air in or it takes 20 min. to load the syringe.

~johnycoolnuts~

 

[RADAR]

I always leave A little bubble of air in The syringe so at the end of the injection, especially in the glutes where I can't see it as well, I hear a little fart, which is the little bubble of air going in, plus it clears out any residual oil from the needle.

Exactally, now if you're talking about the vial you are drawing from , eventually after drawing out of the vials you will build up a suction making the gear slower and slower to enter the pin, thats why its a good rule of thumb to press the same amount of air into the vial as the amount you are drawing out to prevent this.