fina

[c17]

Can it flow through a 25g pin easily?

 

[nydj66]

I use a 25-guage 1" and Fina can be injected with moderate force on the plunger. I've tried 25-guage 1 1/2" and that just requires too much force to be done safely.

 

[SlimJim300]

Assuming the oil used is thin enough, yes.

 

[c17]

lets say it homemade. thin enough?

 

[solidspine]

Good question,

I can’t remember, It must because I would never use a short needle in my glute and I certainly inject fina everywhere.

 

[rakasha681]

All depends on the oil. My homeade fina goes through a 1.5"x25g without any problems, the kit i used had safflower oil, but i also have .5cc of BD test prop mixed with the 1cc of tren, so that might thin it out a little bit. Warming it up first always helps out too.

 

[NURSEPIMP]

It will go through if its a normal kit like everyone else uses.
It will just take a bit more patience and pressure on the plunger.

Good luck,
NP

 

[MUSTANG_18]

Yes, a 25g will be fine.

M18

 

[swordfish151]

Yes...easily...not that easy...but it will flow through..

 

[Pikaberdot]

Goes through fine for me. Homemade, 25g, 1" pins. Used grapeseed oil, and always heat the syringe before injection.

 

[gettnlarge01]

I use a 25g 5/8 pin for mine. If you are having trouble getting it thru the pin you can put the vial in some hot water for a few minutes then draw and shoot.

 

[NURSEPIMP]

+1
good idea..

-NP