Failed Tren Conversion

[WHITE716]

Whats up guys this weekend I attempted to convert my fina but was very unsuccesful. The kit never came with 18 needles do I user my 22 guage pins... and the instructions i had a bunch of mumbo jumbo that wasnt needed... is there any straight forward instructions out there....

when i was filling the bottle I like an asshole didnt think and i used the same filter so all that white shit shot into the bottle

I got so fuckin pissed I just scrapped the whole conversion........
the instructions never said anything about the 2 filters
but i should have known.....

any tren vets out there have very simple instructions

 

[Stillgoing]

here ya go.....

http://www.gotfina.com/articles/make.html

 

[finaflex]

http://208.56.169.252/kilo53/p3.html

 

[WHITE716]

THANKS BRO

Those are the directions i used... there is so much stuff in there that is not needed there is like 18 steps when all you really need is about 6 or 7

 

[ROLGOR]

what kit did you use? My suggestion is to read through the instructions a few times then write the steps down as you wish to preforme them. Your right. It is a simple process.

 

[RICOSUAVE]

1. CRUSH PELETS ( USE A STRAW WITH ONE END STAPLED AND CRUSED WITH A HAMMER VERY GENTEL!!!)
2. DISOLVED THE CRUSHEED PELLETS INTO THE BA SOLUTION ( CLOSE THE VILE AND SHAK IT FOR ABOUT TWENTY MIN)
3. LET IT SIT OVER NIGHT OR UNTILL ALL THE PELETS ARE DISOLVED
4. WARMED THE DISOLVED SOLUTION ( IN HOT WHATER FOR ABOUT FIVE MINUTES (* BOIL WATER AND THEN TAKE OUT OF THE HEAT!)
5. USING AND 18 GAGE AND A 10 CC PLUNGER, EXTRACT WARMED-DIOLVED SOLUTION AND MIX IT WITH THE OIL.
6. SHAKE IT GOR ABOUT FIVR MINUTED ADN LET IT SIT FOR ABOUT 1/2 HOUR.
7. THE SOLUTION SHOULD NOW HAVE A WHIE PRECIPITATION AT THE BOTTOM.

4. WARMED THE DISOLVED SOLUTION ONCE MORE ( IN HOT WHATER FOR ABOUT FIVE MINUTES (* BOIL WATER AND THEN TAKE OUT OF THE HEAT!)
NOW USING THE 18 GAGE AND A 10CC PLUNGER EXTRACT THE SOLUTION ONCE MORE --UNSCREW THE 18 GAGE AND INSERT THE FILTER WHILE PLUNGER IS STILL FULL ( USE RUBBER GLOVE AND TRY TO KEEP THE ARE VERY CLEAN) NOW START FILTERING THE SOUTION INTO AN EMPTY BOTLE THAT CAME IN YOUR KIT( IF THIS IS A SEAL BOTTLE YOU NEED TO LET THE AIR OUT BY USING AND EXTRA EMPTY NEDDLE ON THE SIDE OF RUBBER STOPPER)
8. REPEAT THIS PROCESS AND GO THROUGH ( EVEN THE WHATE STUF AT THR BOTTOM OF THE BOTLE) ALL THE SOLUTION.
9. YOU GOT FINA, SHOULD HAVE A GOLDEN CLORE TO IT.

 

[WHITE716]

i used

i used the kit from finakits.com and they left shit out and they told me thats impossible BULLSHIT

once i do it and do it right im gonna make my own instructions so that if your not a scientist you will still be able to make tren

 

[RICOSUAVE]

MY SPELLING WAS NOT PREFECT BUT (DON'T HAVE MUCH TIME) I HOPE IT HELPED

 

[WHITE716]

thanks rico see those are directions