Changing a Needle tip

[CheapPinz]

A common question is: will your needle tips fit onto the 3cc syringe and needle combos?
The answer is yes. Every syringe we offer has a "spin on" needle tip. The original needle can spin off and a different size can spin on. This allows you to keep a needle 100% sharp.

 

[zedhed]

And you MUST keep a 100% sharp needle. So you all use one needle to draw your substance with. Then change that out to your injection needle. For my draw needle I use a 23 ga 1" and for injections I use a 25ga 1.5". I like the 1.5" cuz it works very well for me for an all around needle.

 

[JBEXT81]

Do ya'll recommend always changing the needle tip after drawing out of the vial before injecting???

 

[C.K.]

how much precious oil do you lose/waste per change

 

[zedhed]

jebex, YES ABSOLUTLY! You would not believe the diff between a once used needle and a fresh needle comfort wise and for sanitation. That used draw needle can actually tear the skin and muxcle as it is passing through, not to mention any veins that you may hit.

ck, its minimal and can even be zero if you pull back the plunger first before you take off the used draw needle.

 

[gwr15]

Can I use that 25gauge 1.5 in needle to shoot 2ml of deca or 1ml of sustanon in my glutes?

 

[BLM Shot]

This was actually one of my noob questions. I already had it answered through a pm, but this is great info and I imagine a lot of noobs have this question.

Thanks for posting. Great info!

 

[Gawd]

can even be zero if you pull back the plunger first before you take off the used draw needle.

Exactly what I do.. Don't see how any would be lost.

 

[ALIN]

Nothing better than a sharp pin,,,nothing worse than a dull one

 

[Zyglamail]

Do ya'll recommend always changing the needle tip after drawing out of the vial before injecting???

YES!

how much precious oil do you lose/waste per change

Virtually none (or 1 drop at most). You can draw air into the barrel clearing the drawing needle of liquid. Screw new pin on and slowly press plunger to push air out until you see the liquid go up into the new pin or if your careful till you see oil at the very tip of the new pin.