2g kit with 2 carts??

[JuicedJeeper]

its a finakits kit. i put the pellets into the magic sol'tn and used Lewd's method of putting them into hot water until dissolved... I waited until they looked dissolved... about an hour an 15 minutes... dark amber color... just mixed in the oil, now there are 2 distinct layers, one a piss yellowish, and the other a gunky dark layer. its been about a half hour. when I swirl the two i see little "floaties" it looks like the bottom layer is real gunky... my next step is the coffee filter. should i filter everything at once or go layer by layer? are the little gunkys normal?? the bottom line is will it be safe to inject when done? i emailed chem to get his input but thats where im at now!!! if i get more dissolving solution, can I mix it directly in with the current oil/magic mixture?

 

[ironmaster]

I did this the first time I used fina.......put 4 carts in a 2 cart kit. It was very difficult to get into solution, and Animal chewed my ass for doing it. But, he had me coffee filter it, and bake it 3 times at 250 for 10 min. each time, and then run it through a second syringe filter, and it came out pretty good.....very potent stuff.....man what a taste after injecting.
Animal now has kits and directions on his website for making higher concentration tren.

 

[JuicedJeeper]

how did yours look at the second stage?? (mixing dissolved pellets w/solution) did you let it settle overnight before coffee filtering it? what dosages were you taking it after you completed the conversion?? was your concentration 150mgs/ml give or take?? sorry for all the questions!!!

 

[JuicedJeeper]

bump for the ironmaster and any other comments!!!

 

[ironmaster]

Yes, in the second stage it was very thick with a lot of undissolved gunk, jammed the syringe filter immediately.
It took all night to pass through the coffee filter and still was darker and more cloudy than it should have been. I let it sit all day, and after baking and re-filtering with a syringe filter, it turned out quite nice. I was aiming for 150mg. per cc, not sure what I lost in the filtering, but if you are patient and let it take it's time to filter and settle, I think I retained most.
Hey man, here are the new instructions for making 100 or 200mg. per ml tren solutions:
Higher mg/ml.

If you want 100mg/ml and you have 2000mg of hormone, you need 20ml (2000mg/100mg/ml is 20) total solution. You must use all of bottle 1 which is 5ml in a 2gF kit. You must use 5ml of bottle 1 solution for every 2000mg of hormone you have. 2000mg of hormone takes up
2ml so now you have 7ml. 20ml total needed 7ml used means you need 13ml from bottle 2. Bottle 2 had 21 ml so 21ml - 13ml means you take out 8ml from bottle #2.

If you want 100mg/ml and you have 4000mg of hormone, you need 40ml (2000mg/100mg/ml is 40ml) total solution. You must use all of bottle 1 which is 10ml in a 4gF kit. 4000mg of hormone takes up 4ml so now you have 14ml in bottle #1. 40ml total needed 14ml means you need only 26ml from bottle number 2. In bottle number 2 was 41ml so you need to take out 15ml.

You just follow the regular kit instructions to start. I have made the 200.......came out great and POWERFUL.

 

[JuicedJeeper]

how long did you wait before you put it throught the coffee filter. I think I will let it sit until tonight, then put it throught the cofee filter for a day or so, then do the baking and refiltering... i hope it works!!! iu want to inject at least .5cc's a day!!!

 

[ironmaster]

I let it sit over night before both filterings (that's why you have to bake - to resterilize) It will take 8 hours to pass through the filter if yours is as thick as mine was. It will be fine......may not get the full 150, but should be close if you take your time.

 

[JuicedJeeper]

big thanks to the ironmaster!! i appreciate the help

 

[ba51683]

Im new to the fina world and researching, my question is all the sites say they dont include the pellets so how do u make the solution with out the pellets, or am i just reading this wrong?

 

[alien amp pharm]

Im new to the fina world and researching, my question is all the sites say they dont include the pellets so how do u make the solution with out the pellets, or am i just reading this wrong?

The pellets is where the tren comes from.

Hence, the solution would be worthless without pellets.