Please Scroll Down to See Forums Below JuicedJeeper
New member
what would happen if you used a 2g kit and dumped 2 carts in?? will the conversion still work? what would the concentration be?? just curious?!!!
2g kit with 2 carts??
- Thread starter JuicedJeeper
- Start date
JuicedJeeper
New member
would the concentration be double, so instead of getting around 75mgs/ml, will i get 150mgs/ml??? fina experts!!!!!!!
JuicedJeeper
New member
any fina experts??
JuicedJeeper
New member
bump 
I would assume so as long as they gave you enough of the dissolving solution. The final product would come out thicker though so a bigger gauge may be needed. Again im just assuming my fina is baking now as I write and im gonna shoot it up once im done. Finally first time doing fina!!! 
A
alien amp pharm
Guest
Mike P.T. said:my fina is baking now as I write and im gonna shoot it up once im done. Finally first time doing fina!!!
I will be joining you soon, my friend!
Fina virgin here also.
JuicedJeeper
New member
its a finakits kit. i put the pellets into the magic sol'tn and used Lewd's method of putting them into hot water until dissolved... I waited until they looked dissolved... about an hour an 15 minutes... dark amber color... just mixed in the oil, now there are 2 distinct layers, one a piss yellowish, and the other a gunky dark layer. its been about a half hour. when I swirl the two i see little "floaties" it looks like the bottom layer is real gunky... my next step is the coffee filter. should i filter everything at once or go layer by layer? are the little gunkys normal?? the bottom line is will it be safe to inject when done? i emailed chem to get his input but thats where im at now!!! if i get more dissolving solution, can I mix it directly in with the current oil/magic mixture?
I did this the first time I used fina.......put 4 carts in a 2 cart kit. It was very difficult to get into solution, and Animal chewed my ass for doing it. But, he had me coffee filter it, and bake it 3 times at 250 for 10 min. each time, and then run it through a second syringe filter, and it came out pretty good.....very potent stuff.....man what a taste after injecting.
Animal now has kits and directions on his website for making higher concentration tren.
Animal now has kits and directions on his website for making higher concentration tren.
JuicedJeeper
New member
how did yours look at the second stage?? (mixing dissolved pellets w/solution) did you let it settle overnight before coffee filtering it? what dosages were you taking it after you completed the conversion?? was your concentration 150mgs/ml give or take?? sorry for all the questions!!! 
JuicedJeeper
New member
bump for the ironmaster and any other comments!!!
Yes, in the second stage it was very thick with a lot of undissolved gunk, jammed the syringe filter immediately.
It took all night to pass through the coffee filter and still was darker and more cloudy than it should have been. I let it sit all day, and after baking and re-filtering with a syringe filter, it turned out quite nice. I was aiming for 150mg. per cc, not sure what I lost in the filtering, but if you are patient and let it take it's time to filter and settle, I think I retained most.
Hey man, here are the new instructions for making 100 or 200mg. per ml tren solutions:
Higher mg/ml.
If you want 100mg/ml and you have 2000mg of hormone, you need 20ml (2000mg/100mg/ml is 20) total solution. You must use all of bottle 1 which is 5ml in a 2gF kit. You must use 5ml of bottle 1 solution for every 2000mg of hormone you have. 2000mg of hormone takes up
2ml so now you have 7ml. 20ml total needed 7ml used means you need 13ml from bottle 2. Bottle 2 had 21 ml so 21ml - 13ml means you take out 8ml from bottle #2.
If you want 100mg/ml and you have 4000mg of hormone, you need 40ml (2000mg/100mg/ml is 40ml) total solution. You must use all of bottle 1 which is 10ml in a 4gF kit. 4000mg of hormone takes up 4ml so now you have 14ml in bottle #1. 40ml total needed 14ml means you need only 26ml from bottle number 2. In bottle number 2 was 41ml so you need to take out 15ml.
You just follow the regular kit instructions to start. I have made the 200.......came out great and POWERFUL.
It took all night to pass through the coffee filter and still was darker and more cloudy than it should have been. I let it sit all day, and after baking and re-filtering with a syringe filter, it turned out quite nice. I was aiming for 150mg. per cc, not sure what I lost in the filtering, but if you are patient and let it take it's time to filter and settle, I think I retained most.
Hey man, here are the new instructions for making 100 or 200mg. per ml tren solutions:
Higher mg/ml.
If you want 100mg/ml and you have 2000mg of hormone, you need 20ml (2000mg/100mg/ml is 20) total solution. You must use all of bottle 1 which is 5ml in a 2gF kit. You must use 5ml of bottle 1 solution for every 2000mg of hormone you have. 2000mg of hormone takes up
2ml so now you have 7ml. 20ml total needed 7ml used means you need 13ml from bottle 2. Bottle 2 had 21 ml so 21ml - 13ml means you take out 8ml from bottle #2.
If you want 100mg/ml and you have 4000mg of hormone, you need 40ml (2000mg/100mg/ml is 40ml) total solution. You must use all of bottle 1 which is 10ml in a 4gF kit. 4000mg of hormone takes up 4ml so now you have 14ml in bottle #1. 40ml total needed 14ml means you need only 26ml from bottle number 2. In bottle number 2 was 41ml so you need to take out 15ml.
You just follow the regular kit instructions to start. I have made the 200.......came out great and POWERFUL.
JuicedJeeper
New member
how long did you wait before you put it throught the coffee filter. I think I will let it sit until tonight, then put it throught the cofee filter for a day or so, then do the baking and refiltering... i hope it works!!! iu want to inject at least .5cc's a day!!!
I let it sit over night before both filterings (that's why you have to bake - to resterilize) It will take 8 hours to pass through the filter if yours is as thick as mine was. It will be fine......may not get the full 150, but should be close if you take your time.
JuicedJeeper
New member
big thanks to the ironmaster!! i appreciate the help
i appreciate the help
A
alien amp pharm
Guest
ba51683 said:
The pellets is where the tren comes from.
Hence, the solution would be worthless without pellets.
superchicken
New member
if you have an extra ml of ba, and set a few extra ml of sterile oil aside, you can suspend it all, or at least get it all into the final vial.
use cf, cut it as small as possible. pre wet the cf with some sterile oil so it will soak up a minimum amount of fina.
after cf step, dump left over sludge back into the vial it came from, add 1 ml ba, and 2-3ml oil. heat and swirl again.
dump this back into the SAME coffee filter.
then finish as usuall, keeping the oils temperature elvated and warm/hot the entire time(this helps solubility)
your ba content will be slightly higher, and may hurt a little bit more, but all your tren is suspended.
depending on the kit, after the final product cools down there may be some seperation, heating and shaking prior to each use will fix that if it occurs.
use cf, cut it as small as possible. pre wet the cf with some sterile oil so it will soak up a minimum amount of fina.
after cf step, dump left over sludge back into the vial it came from, add 1 ml ba, and 2-3ml oil. heat and swirl again.
dump this back into the SAME coffee filter.
then finish as usuall, keeping the oils temperature elvated and warm/hot the entire time(this helps solubility)
your ba content will be slightly higher, and may hurt a little bit more, but all your tren is suspended.
depending on the kit, after the final product cools down there may be some seperation, heating and shaking prior to each use will fix that if it occurs.
