What quantity that can be performed by whatman filter .45

[anabolics2020]

What quantity that can be performed by whatman filter .45 then becomes unusable Does

1 liter, for example 1000ml

The same question for filter whatman .22

Thank you

 

[kwantz]

syringe filter??? i have been told and I have always did no more than 100ml/100cc
gets clogged up around 80ml you can feel it. and dont try to push or force it, I ahve had the membrane break before. Also filtering while the oil is warm makes like so much easier.

 

[Mr.Dedication]

Each filter are good for 100ml.

 

[Keith1]

With a
. 45 about 100ml without much trouble
. 22 I can only get about 60ml through before I blow the filter

 

[kwantz]

with .22um filters... Warm up the oil. will make the oil a lot thinner and easier to pass through the membrane.. room temp oil will become a bitch to push and will put to much pressure and break the membrane. I usally warm the oil back up to say 50 celcius or so once it starts getting hard to push or cold.

 

[anabolics2020]

thanks

 

[goin on 4T]

syringe filter??? i have been told and I have always did no more than 100ml/100cc
gets clogged up around 80ml you can feel it. and dont try to push or force it, I ahve had the membrane break before. Also filtering while the oil is warm makes like so much easier.

Where do you see syringe filter? Those suck. Even w calking gun.
You should be able to run double the size. Especially if you use a pre-filter.


Sent from my iPhone using EliteFitness app

 

[goin on 4T]

LOL 50c? Thats 122f due you know what the max temp is for most filters? 120f or higher will compromise the filter,
Also you actually let the mixture cool to 100-110 then you filter.


Kwantz stop giving bad info your advice is off base and wreckless.

with .22um filters... Warm up the oil. will make the oil a lot thinner and easier to pass through the membrane.. room temp oil will become a bitch to push and will put to much pressure and break the membrane. I usally warm the oil back up to say 50 celcius or so once it starts getting hard to push or cold.

 

[Mh48500]

I agree with heaating the oil. it difinately helps push through easier. Now the temp???? When you say 50 clesius where you actually measunuring the temp of the oil? I mean I just put it in a pan of water and heat it up. And yeah I have thought that thefilter has to have a point where you would melt it.

 

[kwantz]

I personally prefer using a syringe filter... I can do 1000ml in just over an hour.... tried the whole caulking gun 50cc syringe crap,,, sucks...

its tedius but a 3ml syringe is so much easier to push and faster... Smaller surface area to push, easier to exert more pressure...

Bottle tops are for the lazy,,, fuckin takes forever to filter 1000ml.
each to their own i guess..

and I used 40c as a estimate of heat... it was 45c here two days ago with the humidex... Id say I warm it up to about that temp or at least around that,,, not boiling hot or anything... but like a comfortable temperature a normal person would say wash their hands with? I dont sit their with a fuckin thermoeter lmao...

its been working for me for 10 years man... only time I have ever busted a syringe filter, was my very first time brewing with a calking gun.

 

[goin on 4T]

1000ml with a syringe filter and a 3ml barrel... Wow I am sorry but I have heard some bullshit in my day but that fucking takes the cake for the most bullshit I have ever heard in this forum. Wow now I know you are funny mother-fucker.
I like how you said 40c as an estimate of heat, but in your original statement you said 50c. You just sling it brother like there is no tomorrow.
Wow please keep posting, I love this stuff.
Next thing you will tell us you developed your own ester. hahahahaha

 

[kwantz]

actually brewed/filterd in about an hour or so, ill admit I had a helper, helping weigh and mix.... made last week sometimes..
11*30ml vials test enth
6 vials of deca.
2 vials of tren
2 vials of test enth 350mg/ml
all in 30ml vials... yeah the thumbs are little tender after, but i dont have time to fuck around all day filtering lol.. getr done.

 

[kwantz]

yes that was made with syringe filters... 3cc or 5cc whatever I have avail... personally like 3cc easier to push.

 

[goin on 4T]

actually brewed/filterd in about an hour or so, ill admit I had a helper, helping weigh and mix.... made last week sometimes..
11*30ml vials test enth
6 vials of deca.
2 vials of tren
2 vials of test enth 350mg/ml
all in 30ml vials... yeah the thumbs are little tender after, but i dont have time to fuck around all day filtering lol.. getr done.

you needed someone to help you weigh?
and mix?
LMFAO
Did they hold your hand when you watch scary movies too.
Who fucks around all day filtering? Not you big man. BTW your math sucks. 11 vials at 30ml is 330ml which is almost 1/3 of 1,000ml. The truth be told it would take you almost 4 hours to do 1,000ml. Thank you, I am glad you can clean.

 

[kwantz]

actually 21 vials there if you know how to count, maybe you should learn how to count and the picture is right there haha use your fingers and count each one.,, hahah read the orginal post i made with the picture... you must be goin senile with your old age...
helped me mix and weigh, because i have friends who want to learn/enjoy helping. with your attitude and lame attempts to be funny, i can see you being a bore.

 

[goin on 4T]

oh shit your right so you made 630 in over an hour. Still not 1,000 brother

 

[kwantz]

yeah made from start to finish in over an hour... in my orginal post i said I could FILTER 1000ml in an hour.... Not weigh, mix etc.etc 1000ml in a hour. filtering not a problem... haha i should video tape it. I have 300grams of test e powder I gotta brew up once it shows up... I should put the 1000ml filtering challenge up on youtube.

 

[goin on 4T]

actually 21 vials there if you know how to count, maybe you should learn how to count and the picture is right there haha use your fingers and count each one.,, hahah read the orginal post i made with the picture... you must be goin senile with your old age...
helped me mix and weigh, because i have friends who want to learn/enjoy helping. with your attitude and lame attempts to be funny, i can see you being a bore.

I may be a bore and I may have incorrectly read your post due to old age but I don't lie about a bunch of shit that people who do this stuff know are lies. So just stop trying to make your lies less lies and just tell the truth. Its all good, you can't make a cake with 10 eggs and say its good. Its not bro, its nothing personal so stop making it personal. Hell that gear looks great but don't bullshit us into thinking you made 1,000ml in one hour. Fuck I have made a shit load I don't give a flying crap, its not my ego. So just be happy and say the truth. That way we can all go on with our lives. Last thing we need is someone thinking they can make all this gear in their kitchens when they cant really do it in 1 hour. And your making all that gear in front of your friends may seem cool but that is the perfect amount for the authorities to start finding out things about you. One guy from my gym got pulled over on the way home he had 4 bottles of gear. He also was on probation and was facing a minimum of 90 days in the county pokey. Guess what he did? He rolled, not just on the guy that sold him the stuff, wore a wire did the whole sting, he rolled on another guy that he heard was selling just to keep his ass outa jail. If I were you I would never post a picture of my shit. Dude really I am trying to help you, sure it maybe tough love. But you gotta start thinking.

 

[kwantz]

im in canada... 3 years ago I got pulled over... well I didnt but at the time my girlfriend did. She was driving with expired tags... anyways the dummy in the backseat who had 90ml total of test put it on the floor of the car... Cops seen it... took it asked us what it was. I was freaking right out. In canada you are allowed to have a personal amount. anyways long story short. fuckin assholes kept it, gave the old lady a ticket and sent us on our way. I never ended up hearing back about it or anything? no idea what they ended up doing with it. The cops here in ontario are fuckin corrupt.

I dont make juice infront of just anyone, the guy I was making it with went halfs on the supplies and powder. hes uses it himself. Known him all my life.

I wasnt bragging about how much i could filter... I was just saying that I personally find it more efficient to do it with syringe filters... yeah its a heck of a lot more work... But when I make batches, I like to just get it over and done with as fast as I can... the novelty wore off making it and I dread each time I have to homebrew. I have tried all the methods, except for using those expensive pro units. but out of using bottle tops, 60ml syringe with caulk gun etc... even though tedius as hell, i find 3cc the fastest and easiest to filter with...

anyways sorry for getting out of hand,,, its the tren talking.