Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply
puritysourcelabs
UGL OZ
UGFREAK
napsgeargenezapharmateuticals domestic-supplypuritysourcelabsUGL OZUGFREAK

The 4 trens?

Each has thir place. I would use Ace for your first tren run; if the sides are too much for you to handle you can drop it and it will clear in a few days.
 
black sheep said:
Each has thir place. I would use Ace for your first tren run; if the sides are too much for you to handle you can drop it and it will clear in a few days.

well whats tren hex, and tren/enth places because ive done tren ace its ok but was curious about these two Tren Hex and Tren Enth
 
** Written by BASK8KACE **


The following is a brief summary of the main differences of each that I have created in order to clear up my own confusion on tren and hopefully help others here in the process. It is not meant to provide a detailed description of Tren activity in the body.

1. Trenbolone Acetate--injectable version (Finaject and Finajet)
This is correctly referred to as "Fina." Finaject is the acetate form of trenbolone. It was produced in a short acting ester (acetate), so its effect lasts only a short time and frequent administration is necessary. Finaject was an injectable steroid of veterinary medicine, which was extremely popular in bodybuilding and powerlifting during the 1980's. The injectable Trenbolone Acetate called Finaject is no longer produced.

2. Trenbolone Acetate--pellet form (Finaplix)
Finaplix was a veterinary cattle implant, which contained the potent androgenic steroid Trenbolone Acetate. Once Finaject and Finajet were no longer manufactured, bodybuilders began using Finaplix to make topical or injectable versions of Trenbolone Acetate.

Today, cattle implants have become designer products with varied doses and combinations of estrogenic and/or androgenic (trenbolone) agents. So, the process of converting cattle implants to useful versions of trenbolone acetate has become more difficult since one must separate the trenbolone from the other additives present in the cattle implants before using it.

3. Trenbolone Cyclohexylmethylcarbonate (called Parabolan by Bill Roberts)
Parabolan contains a much different ester than Finaject and Finajet, called Trenbolone Cyclohexylmethylcarbonate. This ester extends the activity of trenbolone for more than two weeks, a more suitable design for human use.

The amount of trenbolone in 76 mg of Trenbolone Cyclohexylmethylcarbonate is equivalent to the amount of trenbolone in only 58 mg of Trenbolone Acetate. The acetate is a little more potent, more effective per milligram, because the acetate ester is lighter than the cyclohexylmethylcarbonate ester; therefore a higher percentage of the weight of Trenbolone Acetate is trenbolone. A similar comparison also can be made with the other long lasting esters of trenbolone: enanthate and hexahydrobenzylcarbonate.

The muscle building properties of Trenbolone Cyclohexylmethylcarbonate are the same as Trenbolone Acetate (Finaject or Finajet) except for the longer half-life.

Although it is very similar, this compound is NOT the same as Trenbolone Enanthate. The only difference in these compounds is the esters (see ester definitions below), which all act almost identically (long lasting esters).

4. Trenbolone Hexahydrobenzylcarbonate (called Parabolan on many message boards)
Trenbolone Hexahydrobenzylcarbonate and Trenbolone Cyclohexylmethylcarbonate are exactly the same substances. Hexahydrobenzylcarbonate ester is just another name for cyclohexylmethylcarbonate ester.

5. Trenbolone Enanthate
Although it is very similar, this compound is NOT the same as Trenbolone Cyclohexylmethylcarbonate (Trenbolone Hexahydrobenzylcarbonate). The only difference in these compounds is the esters (see ester definitions below).

THE DIFFERNCE BETWEEN THE ESTERS

The most important difference between the esters is whether it is a short acting ester or a long lasting ester. The next most important difference is the weight of the ester. As mentioned under the Trenbolone Cyclohexylmethylcarbonate section (above), the relative potency of each ester of trenbolone is partially dependent on the weight of its ester.

The main difference between different esters is simply the number of carbon atoms in the ester. Propionate has three carbons, acetate has two, isobutyrate has four, enanthate has seven, cypionate has eight, and decanoate has ten. More unusual esters, such as cyclohexylmethylcarbonate (used in Parabolan) has eight carbons and one more oxygen than the above esters making it the heaviest.

Therefore, the esters of trenbolone in order of potency when compared milligram to milligram (from most potent to least): 1. Tren Acetate 2. Tren Enanthate 3. Tren Cyclohexylmethylcarbonate (Tren Hexahydrobenzylcarbonate)

The differences in potency caused by the esters are negligible. So, you should base your choice of Tren on how frequently you plan to inject, how much you trust your supplier, and how much you trust the brand of tren you purchase.

If you are concerned about the possible side effects of tren, and don't mind frequent injections, then consider using Trenbolone Acetate. If bad side effects manifest, Tren Acetate will quickly leave your body after the last injection due to the short acting ester (acetate); and your body will be able to begin to recover quickly. On the contrary, your recovery from bad side effects won't begin until 2 weeks after the last injection of a long lasting ester of tren because a long lasting ester of tren will stay active in your body for more than two weeks after your last injection--continuing to contribute to the bad side effects.
 
Therefore, the esters of trenbolone in order of potency when compared milligram to milligram (from most potent to least): 1. Tren Acetate 2. Tren Enanthate 3. Tren Cyclohexylmethylcarbonate (Tren Hexahydrobenzylcarbonate


this is whats confusing to me, from reading the above which is a break down on the 4 trens. i pulled this out of the explaination of the tren's. How is tren ace more potent than tren hex and tren enth when tren hex and ten enth mgs read at 100 and 200 while tren ace stands at 75mgs. one would only think that the higher mgs would have higher esters released, which requires less pokes meaning more potency.
 
Milligram for milligram. Meaning 100mg of Ace is more potent than 100mg of Hex. It is referring to the ester weight.

If you have use acetate and the sides were not too bad, I would try the Tren Enath at 1cc (200mg) e3d
 
black sheep said:
** Written by BASK8KACE **


The following is a brief summary of the main differences of each that I have created in order to clear up my own confusion on tren and hopefully help others here in the process. It is not meant to provide a detailed description of Tren activity in the body.

1. Trenbolone Acetate--injectable version (Finaject and Finajet)
This is correctly referred to as "Fina." Finaject is the acetate form of trenbolone. It was produced in a short acting ester (acetate), so its effect lasts only a short time and frequent administration is necessary. Finaject was an injectable steroid of veterinary medicine, which was extremely popular in bodybuilding and powerlifting during the 1980's. The injectable Trenbolone Acetate called Finaject is no longer produced.

2. Trenbolone Acetate--pellet form (Finaplix)
Finaplix was a veterinary cattle implant, which contained the potent androgenic steroid Trenbolone Acetate. Once Finaject and Finajet were no longer manufactured, bodybuilders began using Finaplix to make topical or injectable versions of Trenbolone Acetate.

Today, cattle implants have become designer products with varied doses and combinations of estrogenic and/or androgenic (trenbolone) agents. So, the process of converting cattle implants to useful versions of trenbolone acetate has become more difficult since one must separate the trenbolone from the other additives present in the cattle implants before using it.

3. Trenbolone Cyclohexylmethylcarbonate (called Parabolan by Bill Roberts)
Parabolan contains a much different ester than Finaject and Finajet, called Trenbolone Cyclohexylmethylcarbonate. This ester extends the activity of trenbolone for more than two weeks, a more suitable design for human use.

The amount of trenbolone in 76 mg of Trenbolone Cyclohexylmethylcarbonate is equivalent to the amount of trenbolone in only 58 mg of Trenbolone Acetate. The acetate is a little more potent, more effective per milligram, because the acetate ester is lighter than the cyclohexylmethylcarbonate ester; therefore a higher percentage of the weight of Trenbolone Acetate is trenbolone. A similar comparison also can be made with the other long lasting esters of trenbolone: enanthate and hexahydrobenzylcarbonate.

The muscle building properties of Trenbolone Cyclohexylmethylcarbonate are the same as Trenbolone Acetate (Finaject or Finajet) except for the longer half-life.

Although it is very similar, this compound is NOT the same as Trenbolone Enanthate. The only difference in these compounds is the esters (see ester definitions below), which all act almost identically (long lasting esters).

4. Trenbolone Hexahydrobenzylcarbonate (called Parabolan on many message boards)
Trenbolone Hexahydrobenzylcarbonate and Trenbolone Cyclohexylmethylcarbonate are exactly the same substances. Hexahydrobenzylcarbonate ester is just another name for cyclohexylmethylcarbonate ester.

5. Trenbolone Enanthate
Although it is very similar, this compound is NOT the same as Trenbolone Cyclohexylmethylcarbonate (Trenbolone Hexahydrobenzylcarbonate). The only difference in these compounds is the esters (see ester definitions below).

THE DIFFERNCE BETWEEN THE ESTERS

The most important difference between the esters is whether it is a short acting ester or a long lasting ester. The next most important difference is the weight of the ester. As mentioned under the Trenbolone Cyclohexylmethylcarbonate section (above), the relative potency of each ester of trenbolone is partially dependent on the weight of its ester.

The main difference between different esters is simply the number of carbon atoms in the ester. Propionate has three carbons, acetate has two, isobutyrate has four, enanthate has seven, cypionate has eight, and decanoate has ten. More unusual esters, such as cyclohexylmethylcarbonate (used in Parabolan) has eight carbons and one more oxygen than the above esters making it the heaviest.

Therefore, the esters of trenbolone in order of potency when compared milligram to milligram (from most potent to least): 1. Tren Acetate 2. Tren Enanthate 3. Tren Cyclohexylmethylcarbonate (Tren Hexahydrobenzylcarbonate)

The differences in potency caused by the esters are negligible. So, you should base your choice of Tren on how frequently you plan to inject, how much you trust your supplier, and how much you trust the brand of tren you purchase.

If you are concerned about the possible side effects of tren, and don't mind frequent injections, then consider using Trenbolone Acetate. If bad side effects manifest, Tren Acetate will quickly leave your body after the last injection due to the short acting ester (acetate); and your body will be able to begin to recover quickly. On the contrary, your recovery from bad side effects won't begin until 2 weeks after the last injection of a long lasting ester of tren because a long lasting ester of tren will stay active in your body for more than two weeks after your last injection--continuing to contribute to the bad side effects.
good post ill give this k.
 
I hqave only used tren enan. but, it definatley worked very well and i was only taking 250mg ew
 
Top Bottom