Test Suspension Question

[SwolK]

A friend of mine called me today and asked a few questions, Im not sure so I told him I would ask you knowledgable bros.

He just started using Test Suspension(Anabolic TS). I know its not the best choice, but it is all he could get ahold of.
he 100% sure it is legit.
Here are the questions:

1.He and I both figured that because it is water based like Winny, he could inject with a 25ga needle. He said it gets clogged in the needle and is now having to inject with like a 20 or 21 gauge. What is going on? I made sure he is shaking it up first. I think he should be able to inject with 23 or 25gauge like I do for Winny. Does this sound normal is it commom for Test Suspension?

2. Second question is, can he drink it like many do with Winny and still get benefits from it?

Thanks guys, and as I said he and I both know that there are better choices of Test out there, so please dont just respond saying that he should use some thing else.

 

[BLACKDOOG]

That brand of Test suspension always gets stuck when you inject in smaller guage needles. You should draw it out with a 18 guager and inject with a 21 or 22 guager because the particles in that brand are big and no you cannot drink suspension like winstrol.

A friend of mine called me today and asked a few questions, Im not sure so I told him I would ask you knowledgable bros.

He just started using Test Suspension(Anabolic TS). I know its not the best choice, but it is all he could get ahold of.
he 100% sure it is legit.
Here are the questions:

1.He and I both figured that because it is water based like Winny, he could inject with a 25ga needle. He said it gets clogged in the needle and is now having to inject with like a 20 or 21 gauge. What is going on? I made sure he is shaking it up first. I think he should be able to inject with 23 or 25gauge like I do for Winny. Does this sound normal is it commom for Test Suspension?

2. Second question is, can he drink it like many do with Winny and still get benefits from it?

Thanks guys, and as I said he and I both know that there are better choices of Test out there, so please dont just respond saying that he should use some thing else.

 

[monster2929]

U need to run the vial under hot water before u pull and than switch pins quick bro, and slam it fast u cant baby it , and negative bout drinking it

 

[big_boy_1]

A friend of mine called me today and asked a few questions, Im not sure so I told him I would ask you knowledgable bros.

He just started using Test Suspension(Anabolic TS). I know its not the best choice, but it is all he could get ahold of.
he 100% sure it is legit.
Here are the questions:

1.He and I both figured that because it is water based like Winny, he could inject with a 25ga needle. He said it gets clogged in the needle and is now having to inject with like a 20 or 21 gauge. What is going on? I made sure he is shaking it up first. I think he should be able to inject with 23 or 25gauge like I do for Winny. Does this sound normal is it commom for Test Suspension?

25 gauge are too fragile and short for intramuscular injection, the 23 would be better.

2. Second question is, can he drink it like many do with Winny and still get benefits from it?

Thanks guys, and as I said he and I both know that there are better choices of Test out there, so please dont just respond saying that he should use some thing else.

No, at most hell absorb 1%.

 

[boops]

25 gauge are too fragile and short for intramuscular injection, the 23 would be better.

No, at most hell absorb 1%.

use 25's all the time and havent had one problem, the smaller the needle the better in terms of scar tissue development....and they do make 25 gauge in an array of sizes (25x1.5, 25x1, and 25x5/8's)

 

[drrman]

25 gauge are too fragile and short for intramuscular injection, the 23 would be better.



No, at most hell absorb 1%.

I use 25 for EVERYTHING, except if im using a suspension where the needle clogs, such as winny that is not micro refined, i like 25g 1" or 1.5" for all my shots, if the oil is thick , just head the barrell before injecting by running hot water over it, much less scar tissue this way

 

[boops]

I use 25 for EVERYTHING, except if im using a suspension where the needle clogs, such as winny that is not micro refined, i like 25g 1" or 1.5" for all my shots, if the oil is thick , just head the barrell before injecting by running hot water over it, much less scar tissue this way

heh i beat ya to it

 

[SwolK]

Thanks guys. agree on the fact that 25 comes in different lengths.
will running it under warm water as suggested really help? I know it helps with oil based, but how will it help this suspension if it is the particles getting stuck and not thick oil?

 

[seventhlttd]

yo bro i used that same stuff and i would heat up some water and letit sit for a couple min after that it is good to go just make sure you get it in fast

 

[drrman]

it might help a little on the waterbased, i wouldn't count on it helping a lot, nothing worse than it drawing up fine then getting clogged while inserted in your ass!! best bet is just to use a larger needle, although it sucks

 

[djsf]

I've used test susp with a 25g, and yes, there is definitely a trick to injecting and preventing clogs / unclogging. What I do is inject as quickly as possible, aiming to get the whole shot done in just a few seconds without pausing. Once you pause, there's an high probability it will immediately clog. Clogs can be fixed by repeatedly aspirating and pressing the plunger again. Sometimes pulling the needle out 1/8" and wiggling it a bit before aspirating to unclog will help.

 

[SwolK]

thanks guys. Ill tell him to run under water and inject fast

 

[theoak01]

do not run it under warm warm it will ruin your shit, use a bigger guage, keep the pin pointed up dont shoot on a downward angle and get it in fast.

 

[drrman]

do not run it under warm warm it will ruin your shit, use a bigger guage, keep the pin pointed up dont shoot on a downward angle and get it in fast.

Id LOVE to see you prove this....running the barrell under warm water will NOT and i say NOT hurt your gear bro, i don't know where you got that from, hot water out of your faucet doesn't get that hot anyways and i promise you you could warm it much hotter and not effect the gear

 

[theoak01]

then why did my source who happens to be a partner in the lab replace my bottle after a misprint happened instructing the user to heat the suspension at no cost to myself?

im going on what my source said and i assume he knows alot about this stuff since he is a partner

 

[drrman]

bro, the heat from a water faucet is not very hot bro, its not like boiling water or putting the bottle on a stove, plus you are only heating the single 1cc or 2ccs you are about to shoot, its not like it has long to sit there and lose any of its effects.....Hell the human body is quite hot inside, does that ruin it also? I think he replaced it because maybe heating the entire bottle then letting it cool then reheating it again may cause some possible bacteria growth or something, but heating it just prior to injecting it is pretty much only getting it to body temperature anyways, not much hotter

 

[theoak01]

bro, the heat from a water faucet is not very hot bro, its not like boiling water or putting the bottle on a stove, plus you are only heating the single 1cc or 2ccs you are about to shoot, its not like it has long to sit there and lose any of its effects.....Hell the human body is quite hot inside, does that ruin it also? I think he replaced it because maybe heating the entire bottle then letting it cool then reheating it again may cause some possible bacteria growth or something, but heating it just prior to injecting it is pretty much only getting it to body temperature anyways, not much hotter

could be the case then

 

[drrman]

sent you some karma bro, didn't mean to come across as an ass on that one.....