Please Scroll Down to See Forums Below LewdTenant
New member
I want to filter a 115ml Jug of TestProp 100mg/ml for storage. I want to use his 30ml vials.what size syring filters I need and what else?
Lewd
Lewd
Question Using Animal's syringe filters
- Thread starter LewdTenant
- Start date
Your_Moms_Kneepads
New member
One filter should do about 100cc .LewdTenant said:
Sizewise the 0.45 micron and the 0.22 micron filters are the ones to use. The 0.22 filters take longer due to the smaller pore size. I'd reccomend getting at least 18g or even 16g pins (if you can find them) to push the oil thru.
You need nothing else-you'll be fine.
Hugh Gellatts
New member
you will need some higher volume syringes. I've used both the 60cc syringes and the 10cc's. The 10's are actually easier because you can generate more pressure to get the gear through the filter (def use the 10 if you go with a .22). the drawback is that you have to keep taking off the filter and putting on a drawing pin.
also you might want a few cc's of sterile oil. once you have filtered the gear there is still some left in the filter. if you run a feww cc's of oil at the end it will push that stuff out.
A's IP painkiller additive is great to. it really works! it isn't on his normal list, but he has it.
also you might want a few cc's of sterile oil. once you have filtered the gear there is still some left in the filter. if you run a feww cc's of oil at the end it will push that stuff out.
A's IP painkiller additive is great to. it really works! it isn't on his normal list, but he has it.
LewdTenant
New member
Ok, So each time I draw, i need to place a new needle and a new filter first? And I only need one syringe? Thanks!
Last question:All I need to buy is needles,filter,syringe,and vials?
Dave,i had my name cut off one board because they limit the characters in your login name, so I am LewdTena there.Looks like a girls name.
Last question:All I need to buy is needles,filter,syringe,and vials?
Dave,i had my name cut off one board because they limit the characters in your login name, so I am LewdTena there.Looks like a girls name.
LewdTenant
New member
bump.
Hugh Gellatts
New member
same filter. just leave the needle and filter in the stopper of the recieving vial. As for the drawing pin, i open up a fresh alchohol schwab and put the pin on top (cap first before removing) when i take it off to attach filter.
when you attach filter to filled syringe after the first time, you will just pick up the recieving vial (with filter in top), turn it upside-down and screw it into the filled syringe. the stuff will not leak back out of the filter when you do this.
make sure to put an extra pin (i use a 25g so the stuff doesn't flow back out when i invert bottle) in the recieving vial. this will release pressure as you pump the filtered juice in.
any more q's drop me an e-mail.
later
when you attach filter to filled syringe after the first time, you will just pick up the recieving vial (with filter in top), turn it upside-down and screw it into the filled syringe. the stuff will not leak back out of the filter when you do this.
make sure to put an extra pin (i use a 25g so the stuff doesn't flow back out when i invert bottle) in the recieving vial. this will release pressure as you pump the filtered juice in.
any more q's drop me an e-mail.
later
Similar threads
