Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply US-PHARMACIES
UGL OZ Raptor Labs UGFREAK
napsgeargenezapharmateuticals domestic-supplyUS-PHARMACIES UGL OZUGFREAKRaptor Labs

Question about Fina strength?

strong island

New member
Ok I finished processing the fina. But I only have around 44cc's from two kits.

Does this meant that the fina is stronger than 75mg/ml

For example 4000/44 = 90 mg/ml

I used T's kit.

Thank you
 
i buy mine converted

How much did all of it run you i bought a 20ml bottle of 200mg/ml converted fina from a good source for $180includes shipping.
 
cartridge 35 x 2 +5(shipping) = 80
Kit = 35+5(shipping) = 40

You paid $9 per cc..I paid 2.72(and mine is probably stronger)

Total 120..so I paid 30% the price that you paid!!


Look on my face when I am jacked..priceless!!!:D
 
Damn your a sharp guy

hockey1 said:
How much did all of it run you i bought a 20ml bottle of 200mg/ml converted fina from a good source for $180includes shipping.

Not to flame you bro but people who buy fina fucking kill me. You could have made that 20ml bottle for $60 if you made it yourself.
 
strong island said:
Ok I finished processing the fina. But I only have around 44cc's from two kits.

Does this meant that the fina is stronger than 75mg/ml

For example 4000/44 = 90 mg/ml

I used T's kit.

Thank you

bump for help to my question
 
You can't suspend trenbolone acetate in oil at any concentration over 76mg/ml without including so much Benzyl Alcohol that it would damage your muscle.
 
Bro I dissolved 4000 mg of fina pellets in the solution...so there is approximately 4000 mg in those 44ml.

So according to my math that means it should be around

90 mg/ml

What am I missing here.

Plus I have heard plenty of guys saying they use half the oil to make it TWICE as strong.

Where did you get your info from bro.

Thanx
 
I believe some of the potency is lost during the process most likely through the heating and also in the sludge at the bottom otherwise everyone would be having that potency.
 
bump...any other opinions on this.

Was homemade ever tested for strength?

I know a lot has to do with how efficient you are at making it.

I thought I did a good job and got 44cc's out of 4g kit.


I should just assume its 75 mg/ml


On animals website he says his 4g kit makes 50-53 ml.

Is this right... because it makes sense if there is no loss of tren in the process.

4000 divided by 75 = 53
 
Strong,

I also used T's kit recently, the 2 catridge one and ended with 45ccs.

From what he explained, is that some fina is lost in the sediment at the bottom. Also, through transfering some is left out in the syringe filter(even after shooting air at the end).

a 44cc yield by the way is a good deal bro. (for that price we both paid :) )

BTW I'm pretty sure you have 75ml/mg anyways bro. At least thats what T told me, I guess I will find out tomorrow.

IB
 
I personally think your right.

strong island said:
Bro I dissolved 4000 mg of fina pellets in the solution...so there is approximately 4000 mg in those 44ml.

So according to my math that means it should be around

90 mg/ml

What am I missing here.

Plus I have heard plenty of guys saying they use half the oil to make it TWICE as strong.

Where did you get your info from bro.

Thanx

I don't think oil cares how much steroid is mixed with it. I have made it 100mg/ml and 150mg/ml and by the use of it I know that it had to be that strength or damn close.
 
STRONG ISLAND AND JOHN BOY

I asked a simple question and got two morons answers,if you cant answer questions like an adult you both are typical gear head assholes who work in a warehouse making 300 per week.I have no problems spending and it measured out @191 mg/ml much stronger than yours assbag
 
LIBeef is right. When you convert it, you lose some of the fina--the amount of which is based on what method you used to convert the fina, as well as what kit.

animals double-kits should produce 50-53 ml of 75mg/ml fina. Other kits will varry.

If you have only 44cc's, then either you lost some of the fina during the conversion process, or the kit didn't come with as much oil as expected. It's good to mesure out exactly how much oil and alchohol you have before conversion so you will know exactly what the strength will be.
 
Last edited:
Seems to be a couple schools of thought on saturation. Some say it can be as high as 150mg/ml but like Twitched said you'd halfta up the alchohol to a point of making injections very uncomfortable. The saturation of the Fina up to 75mg/ml is the norm. Anything higher is of greater difficulty for the oil to hold.

You probably have a concentration of between 75mg/ml to 90mg/ml. The only way to be sure is to have it tested.

I personally like A's kits, always seems to be slightly higher than 50cc from a Component-TH kit.
 
If animals kit is 53 ml of 75 mg/ml strength then that means there was NO tren lost in the conversion. That sound too good to be true.

But if there is some lost and you end up with 53 ml then the Fina is weaker than 75.

44 cc's and 53 cc'ss IS a BIG difference.

I would assume that Both kits will lose about the same amount of tren during the process.

The only difference would be the amount of Oil and Alcohol you mix the tren with.

Unless someone can explain why Animals "magic solution" is better than Mr T's "magic solution" then I would have to assume that Mr T's fina is stronger. But less cc's produced. You could add some oil and BA..which I won't cause I don't have a clue on what kind of ratio is needed.


my .02
 
Re: STRONG ISLAND AND JOHN BOY

hockey1 said:
I asked a simple question and got two morons answers,if you cant answer questions like an adult you both are typical gear head assholes who work in a warehouse making 300 per week.I have no problems spending and it measured out @191 mg/ml much stronger than yours assbag

Bro...R E L A X. There are a lot of guys very uptight on this board who let posts get to them. I didn't mean anything by it.

To be honest I read your post fast and did not see that your tren was 200mg/ml strength. So you got a good price per mg. Only paid 60 more than me.

I have never heard of tren that strong. It might be a problem...because:

1)IT WILL HURT LIKE A MOTHERFUCKER. It will have a high percentage of Benz Alcohol in it because of the amount of tren.

2) It might be a pain in the ass to accurately dose your shots. Since acetate has very short half life you should inject everyday to keep blood levels constant. For example, if you want to take 37.5 every day..then you will have to shoot .18 cc every day. Sound like a pain in the ass to get accurate dosages. there will probably be 30mg of tren stuck in the needle alone. I thought doing a half a cc was a pain in the ass.

Oh yeah...YOU'RE A FUCKING DUMBASS FOR BRINGING OCCUPATION AND SALARY INTO THE DISCUSSION.

There are probably board members who do work in warehouses and don't make six figures a year...and THERE IS NOTHING WRONG WITH THAT. So don't be ignorant.

Again wasn't flaming you...but now I am.
 
Re: STRONG ISLAND AND JOHN BOY

hockey1 said:
I asked a simple question and got two morons answers,if you cant answer questions like an adult you both are typical gear head assholes who work in a warehouse making 300 per week.I have no problems spending and it measured out @191 mg/ml much stronger than yours assbag

Please enlighten us Hockey, what do you do for a living? BamBam
 
Strike one up for the warehouse workers!!!!!!

I work in a warehouse and make a damn good living bro.....

I can say I make a grand a week and mommy and daddy didnt support me until I was 30.
 
IM 43

I own a home,family,2 cars and pay alot of taxes,i did work in a warehouse for many years as did my father,i was on myown at 17 and support my family,I wanted you to feel the anger of a stupid comment(why i posted the warhehouse comment)Ihave no respect for anyone who seriously puts down another hard working persons job.We all have more important issues to deal with,good luck AND growth to all.It does burn if i only shoot the fina but cut it with decca or eq.
 
Top Bottom