Powder AAS to liquid or pills

[mrdeeznuts]

What is the easiest way to take dbol, winny, and anavar powder for dosing?

Just measure the powder on a scale and take it?

If you don't have a scale, Proplyene Glycol and dissolve your powder in it. 7.5g powder in 500g PG makes 15mg per ml?

Any suggestions or information?

 

[mikebzt]

Peg 400, or 151 or grain alcohol is all you need


Liquid Var
Here is a synthesis of the whole process you should get through.
Use a graduated beaker or cylinder (I don't think the 2% error margin on the beaker is of much importance with var - a 10mg/ml solution would result in something between 9.98mg/ml or 10.02mg/ml)

1. Put some 151 or PEG in the beaker (100ml for example)
2. Add you 2g powder (weigh your powder first- of course) and mix with a glass stick (or anything else)
3. Add more 151 or PEG 'till you reach the 200ml mark on your beaker and mix
4. Put some water to heat in a pan and stop your stove before it starts to boil (no flames or hot stove close to your beaker please !!!!!).
5. Hold your beaker in the hot water and swish till all the powder is dissolved (will take 2-3 minutes).
Your done.

Some alcohol has probably evaporated if you used 151 during the heating process.Just add some more till you reach the 200ml mark on you beaker.
__________________

 

[Lowest]

I dissolve mine in EC(everclear) at 15-20mg/ml. You can also cap it but that takes more time and is messier. I only use PG when I'm making injectable winny.

 

[mrdeeznuts]

Peg 400, or 151 or grain alcohol is all you need


Liquid Var
Here is a synthesis of the whole process you should get through.
Use a graduated beaker or cylinder (I don't think the 2% error margin on the beaker is of much importance with var - a 10mg/ml solution would result in something between 9.98mg/ml or 10.02mg/ml)

1. Put some 151 or PEG in the beaker (100ml for example)
2. Add you 2g powder (weigh your powder first- of course) and mix with a glass stick (or anything else)
3. Add more 151 or PEG 'till you reach the 200ml mark on your beaker and mix
4. Put some water to heat in a pan and stop your stove before it starts to boil (no flames or hot stove close to your beaker please !!!!!).
5. Hold your beaker in the hot water and swish till all the powder is dissolved (will take 2-3 minutes).
Your done.

Some alcohol has probably evaporated if you used 151 during the heating process.Just add some more till you reach the 200ml mark on you beaker.
__________________

This same method will work for dbol and winny correct?

 

[Lowest]

Yes, same method will work for winny and dbol. Var is actually harder to suspend so you can do winny/dbol at a slightly higher concentration, 25-30mg/ml if you want.

 

[kbrkbr]

The winny that I have suspended for friends seems to fall out about every two days. Never had that problem with var or dbol.

 

[mrdeeznuts]

I dissolve mine in EC(everclear) at 15-20mg/ml. You can also cap it but that takes more time and is messier. I only use PG when I'm making injectable winny.

Whats the method u use?

 

[mikebzt]

The winny that I have suspended for friends seems to fall out about every two days. Never had that problem with var or dbol.

micronize the winny and you will never have a problem

 

[TallB4Small]

i know the best thing to do would be to store it in vials, but if i were to store like an 8 weeks supply in a jar, would that be practical for storage, until im done with it? or does it really have to be a vial?

 

[mrdeeznuts]

micronize the winny and you will never have a problem

from mikebzt previous post:

Micronized winny

--------------------------------------------------------------------------------

Take 1 g winny powder add to vial
Add 2.5 ml PEG400 to vial
Add 1 ml BA to vial
Heat until it goes into solution (becomes clear liquid)
Withdraw clear liquid from vial with syringe and filter using .45 filter into new sterile vial.
Add 15.5ml bacteriostatic or sterile water into vial.
This will bring the winny out of solution and micronize it...swirl gently until all cloudy(most important part)
Now put stopper on vial and shake vigorously.
Let cool and shake again...cap and you have 50mg /ml pure(sterile) micronized winny suspension in water.

 

[TallB4Small]

i know the best thing to do would be to store it in vials, but if i were to store like an 8 weeks supply in a jar, would that be practical for storage, until im done with it? or does it really have to be a vial?

Anyone?

 

[mrdeeznuts]

Anyone?

is this liquid or powder...?

 

[Lowest]

If it's a solution like winny in PEG or EC, for oral usage, then sure you could store it in a jar. Keep it warm enough not to crystallize out and you should be fine. If it's for injectable, obviously keep it in vials for sterility.

 

[TallB4Small]

thanks... its gonna be oral, EC

 

[rpol]

With D-bol I use everclear and then mix with proyplene glycol to get the concentration I want, I usually use 40mg/ml as a ratio because that way I know each 1/4 ml is 10mg D-bol and I dose 4 times a day which is what I am planning on adding to my cutting cycle