pin size for test suspension

[brownbomber1]

i gots some UG micronized test supension and i've heard of a few ppl running it through slin pins...what size pin do u guys recommend for micronized test suspension, from experience?...i've used 25 gauge for micronized winny before but not sure about suspension. Im gona gona do ED so would prefer to use a slin pin due to the frequency of injections...anyone...

 

[djsf]

I am also using UG micronized test susp and I am running it using a 25g pin. It's a little tricky to use and the pin can easily clog, so learning to inject it smoothly and unclog it when that happens (which is often) takes some practice. You will probably want to inject into quads and I would use a 25g for that. To clear a clog, it usualy works to aspirate and pull the pin out 1/8" and try again. Given how often I get clogs with a 25g, I would hesitate to use a slin pin.

 

[IronFist]

I've had micronized test suspension from 2 different UG labs that I was able to shoot with a 27g pin...Good luck getting the denkall aquatest or the jurox through anything other than a 21g....

 

[Its All Genetics]

I am also using UG micronized test susp and I am running it using a 25g pin. It's a little tricky to use and the pin can easily clog, so learning to inject it smoothly and unclog it when that happens (which is often) takes some practice. You will probably want to inject into quads and I would use a 25g for that. To clear a clog, it usualy works to aspirate and pull the pin out 1/8" and try again. Given how often I get clogs with a 25g, I would hesitate to use a slin pin.

are you guys shooting this multiple times a day or just once an hour before you lift... im thinking about getting some ug susp and i was trying to figure out how much more it was going to hurt then prop

 

[brownbomber1]

i have illusion labs suspension...a few guys i know have ran it with a 27gauge...i think i might get some 27gauge and 25 gauge and c which ones work better

 

[djsf]

I run it twice a day to try to keep blood levels constant all day and night. I find after I shoot it starts hitting in about 1-2 hours, and it hits for about 8 hours, then tapers off gradually. It might actually hit more evenly than prop, where all the esters can fall off around the same time and 14 hours later is whacks you. With test suspension the depot is the reservoir in your muscle which gradually circulates into your bloodstream.

The test susp injection itself is not painful, it's 12-24 hours later that it starts to hurt a lot. I am guessing this is because all the little crystals have sharp edges and they irritate the muscle tissue, but that is just a guess. The pain is enough to make it hard to bend your leg to 90 degrees. Using my leg muscles just exacerbates tha pain even more. If you want to work legs at all in your cycle, I would stick to oils.

 

[KA-BAR]

I always used 25ga. Yes certain UG labs will work fine.

 

[fleabag711]

I just posted this ?? in another post, but here goes. I got 240ml test susp in oil today and their is some kind of sediment in it. Looks like micro sponge (real small) What could this be??Its only in 2 of the 6 vials. Also, if everything was safe, could I just use a 23 or 21 gauge and just avoid clogs? or are clogs safe to have as a filtering precaution?? thanks bros

flea

 

[djsf]

Test suspension is always in water, not in oil. The suspension is little crystals of testosterone which do not dissolve. So the bottle will look like it has a milky, chalky sediment in it. You need to shake it vigorously right before drawing and shooting. The clogs are not unsafe and do not need to be filtered out, they are just chunks of the testosterone crystals that get lodged inside the pin and need to be worked out). Use a 21g if your test is denkall aquatest or jorox. Otherwise, ask your supplier which pin size to use. Many of the UG test suspensions these days can be shot thru a 25 or 27, and the supplier likes to boast about that.

 

[fleabag711]

djsf,

bro thanks for your reply. My understanding of test suspension is that it can be in oil also? I've read that somewhere too. I've read that people use oil for test suspension crystals on different forums. Why wouldnt someone be able to add the crystals to oil??

flea

 

[fleabag711]

The oil eases the stinging from what I seen on a elite thread. you were right about the crystals. i examined them closer and in better light and all is good.

flea

 

[Advisor_x]

saving my comments on this one.....but good luck