Okay, walk me through preparing HCG

[Slyder190]

I got my amps and my BAC water, so how do I put this altogether correctly? Thanks guys.

 

[CLOMIDCLOWN]

depends how many iu's you want total and for each injection

 

[Slyder190]

depends how many iu's you want total and for each injection

500-sorry. K for any help

 

[bw1]

500-sorry. K for any help

resuspend in 10 ml of sterile water

mix powder amp and water amp together, should be 1 ml. Use syringe pull out
1 ml of sterile water from the 10 ml of sterile water(and discard in
sink) add the one ml of mixed hcg so now you have 10 ml diluted to 500iu
per ml.

 

[slat1]

If you have a 5000iu amp this is what I do.
Put 10ius of water in the powder. (each iu will equal 500iu's of mix)(5000/10=500)
Take 10 slin pins and withdraw 1iu per pin.
Inject one pin right there if you are ready.
Put the other 9 in the fridge.
Pull one out each day and shoot it til they are gone!
Good luck

 

[nydj66]

Do you use a hypodermic to inject the water through the rubber stopper into the powder amp to try and keep everything sterile?

 

[Slyder190]

I have 30ml bottle of BAC water, so just adjust the dosages accordingly correct? Thanks boys.

 

[Slyder190]

So can I just add the powder, liquid and BAC water together and shake it up?

 

[Vicious cycle]

If you have a 5000iu amp this is what I do.
Put 10ius of water in the powder. (each iu will equal 500iu's of mix)(5000/10=500)
Take 10 slin pins and withdraw 1iu per pin.
Inject one pin right there if you are ready.
Put the other 9 in the fridge.
Pull one out each day and shoot it til they are gone!
Good luck

Right on the money.

 

[Slyder190]

what do I mkix the powder and liquid in before putting the combined two in the BAC water?

 

[Bonkme2]

what do I mkix the powder and liquid in before putting the combined two in the BAC water?

What liquid?
Isn't it just the powder and water?
If you're refering to the other amp you have, that should just be water.

 

[bw1]

what do I mkix the powder and liquid in before putting the combined two in the BAC water?

If you look at the 2 amps, 1 powder and 1 water. The powder amp is most likely taller than the water amp(not sure which HCG you have). Take your amp opener and open both amps, draw the water out and inject into the powder amp then swirl it around to mix it. Then draw the mixed solution out of the amp and inject into the BAC water you have. Make sure you clean the rubber of your BAC water just like you would any vial. Also know how much water you have in your BAC vial so you know what the mixed solution concentration is.

 

[Slyder190]

Cool, I think I'm good to go, good lookin guys.