Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply
puritysourcelabs
UGL OZ
UGFREAK
napsgeargenezapharmateuticals domestic-supplypuritysourcelabsUGL OZUGFREAK

needles

fatboy4

New member
got my new needles in today got some 23 gauge 1.5 inch and some 25 gauge 1 inch needles. have only used 22 gauge 1.5 inch needles in the past and the25 g look small as shit i hope they will work out for thigh injections, if not the 23 gauge still loooks smaller than the 22 by a good bit. well pointless post so far but has anyone tried the 25 gauge 1 " needles to do thigh injections before. let me know what ou think.. thanks.
 
It depends on what your shooting. It will be hard too push oil based through a 25. The length is sufficient for quad injections though.
 
When you're talking about gauge, what matters is what you're injecting, not where you're injecting it. If you're using an oil based roid, you might have a problem with the 25 ga. 23 ga. or larger is better for oil based. I have never used a 25 ga. If you can pull the oil into it, it should work, but 23ga is better. 23ga, 1.5" for glutes or quads.
 
25 gauge is the MAXIMUM for oil injections

but it can be hard with the 3 ss syringe you guys use in the US.
i can assure you if taking a 2 cc syringe and a 25 gauge with a 5/8 inch needle (yes the length of the needle is important as well for getting the gear out) you even don't have to heat the syringe.
 
damn, i new it was too good to be true thanks for the replys guys even though it wasnt what i wanted to hear.
 
Top Bottom