making enanthate ?

[stillkickin]

I need some opinions on if this is the correct way to do this i found it in a search?Testosterone enanthate :

You will need benzyl alcohol, syringes, a container that will hold 20 ml and oil
(arachis or sesame oil). Because we will inject this, the oil needs to be
sterile. To sterilize it heat the oil to 212 degrees F (100 degrees C). In the
mean time use a syringe to fill your container with EXACTLY 20 ml of pure water.
Mark the container at the water level. use the syringe to take out 0.6 ml and
make another mark. Your container is now marked at 19.4 ml and 20 ml. Dump out
the water and let the container dry. let the oil cool off.

Dump the powder (5 g) in the container, add oil until it reaches the 19.4 ml
mark. Then add Benzyl alcohol until it reaches the 20 ml mark. Seal your
container and shake it well. You are now ready to use the product. It is a
testosterone enanthate solution at 250 mg/ml. I suggest a weekly injection of 2
ml (500 mg) for a period of 10 weeks. At this rate the product will last you
exactly 10 weeks.

 

[yoop33]

I don't know about that. Seems really simple but then again I am no Chemist.

 

[drrman]

HELL no, that is not the correct way to make test enanthate. You need to do quite a bit more research bro.

Please do some more research, a TON more....that is in no way the correct way to make it

you don't even have a step for filtering it in there bro???

 

[BigCracker]

HELL no, that is not the correct way to make test enanthate. You need to do quite a bit more research bro.

Please do some more research, a TON more....that is in no way the correct way to make it

you don't even have a step for filtering it in there bro???

Filters are for pussies. lol

 

[drrman]

Filters are for pussies. lol

that did make me laugh...but seriously....this guy needs to do some research

 

[BigCracker]

that did make me laugh...but seriously....this guy needs to do some research

I agree. Caring about you health and trivial side effects like death, etc really is a good thing.

 

[kbrkbr]

Here you go. Sorry, I don't remember who the author is.

Most of these recipes can be done with less than the recommended amounts of ba and bb, but you will need to change the amount of oil in the recipe if you do. Use the powder converter sticky to find the appropriate amounts.

Test Enanthate 5 gram conversion

Needed
5 grams test E
Benzyl Alcohol 1ml 5% BA
15.25 ml sesame oil
Syringes 3cc & 5/10cc
18 or 20 guage needles
Vial
Sterile Vial
Whatman sterile filter

1. Weigh out 5 grams of powder.
2. Place powder in vial.
3. Add BA to the vial.
4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
7. Place a 18 or 20 gauge needle in the sterile vial attach whatman sterile filter.
8. Place another needle in the sterile vial to relieve the pressure.
9. Draw out solution with a syringe, run though whatman filter.
10. Take other syringe with 2ml oil, run through whatman into solution.

Makes 20ml @ 250mg/ml


Test Enanthate 10 gram conversion

Needed
10 grams test E
Benzyl Alcahol 2ml 5% BA
30.5 ml sesame oil
Syringes 3cc & 5/10cc
18 or 20 guage needles
Vial
Sterile Vial
Whatman sterile filter

1. Weigh out 10 grams of powder.
2. Place powder in vial.
3. Add BA to the vial.
4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
7. Place a 18 or 20 gauge needle in the sterile vial attach whatman sterile filter.
8. Place another needle in the sterile vial to relieve the pressure.
9. Draw out solution with a syringe, run though whatman filter.
10. Take other syringe with 2ml oil, run through whatman into solution.

Makes 40ml @ 250mg/ml

 

[kbrkbr]

BTW, I've always found the raw enat. material easier to handle if I store it in the freezer.

musclechemistry has a nice lab forum. helpful bros there.