Fina Problems.. Please Help!!

[vitor1]

I ordered a double kit (4,000) from "A" .... but I only got @33 cc's out of it??? Now I thought I was suppose to get over 40 some.. Anyway now what does that make my solution??? Cause I put two carts of Fina in.. will I still hold the 75mg per cc?? I wouldn't think so?? Can anyone help... can I just buy more oil and add it to the solution?? Thanks

 

[needleboy]

What happened to the rest of the oil???

If you have 30ml and 400mg of tren, 4000/30=133.33mg/ml

 

[vitor1]

I don't know I just followed instructions and it all worked well solution looks good but I only got 33?? Can I add more oil to make a 75 mg solution??

 

[Zyglamail]

Im with needle on the concentration. How do you figure you only have 33ml? How much fluid was left behind when you drew it up to sterile filter? A 4gf kit should yield about 50ml so something just isnt right. By the way, you could add more oil to lower concentration.

 

[needleboy]

if you used the kit correctly there should not be any oil left. That being siad yes you can add more oil, you'll need 20 ml more assuming you made no mistakes. 20 ml of oil does not just dissapear!!

 

[vitor1]

I think it was underfilled when I orginally ordered I ordered two 2gf kits and he sent me a mail saying that he accidently sent me 1 4gf kit.... which I thought was cool maybe he really only sent me a 2gf??? I don't know??? Everything went smooth and there is no oil left but I really need to figure this out??

 

[Zyglamail]

How much magic solution did you have? 5ml or 10ml?

 

[vitor1]

I bet he made a mistake and sent me just one 2gf kit!!

 

[vitor1]

I dunno...bottles aren't labeled and it is first time I'd ever seen one of these kits.... so I don't have any reference..

 

[Zyglamail]

It could have just been a single 2gf kit, but they only make about 22-23ml final product so something just doesnt seem right. Also, if it was a 2gf kit, there would only be 5ml magic solution which will not fully suspend 2 carts.

 

[BigBootyDaddy]

Your bad

I would first have to think you got the right kit. Because if you got only 1 kit then you would never be able to even get 33ml. I kit would make a max of 20-25cc's.

So it must have been in the process that something went wrong.

bbd

 

[needleboy]

A 2gf kit will only yield 21-23 mg, so something is amiss. Email A and ask hi WTF, he's good about fixing problems.

Did you get 2 vials, 1 magic solution of 10 ml should be the same size bottle as the other. filled less than 1/4 full with a clear liquid., and 1 filled almost full with oil???

Also run us through the procedure you used.

 

[vitor1]

The one vial was not filled almost full with oil.... maybe that is where the mistake was.. Maybe I had 10ml magic solution but only the oil was the amount that comes in 2gf kits?? Cause my pellets dissolved fine... so what does this leave me with if that is the case..?? Thanks..

 

[needleboy]

That aould yeild you somewhere between 28 and 33 ml. At this point I am most concerned that you had 10ml of magic solution. Were Bith bottles the same size?? If they were something ain't right. But you should be able to get 20ml of oil from A, and bring it to 53ml.

If you did have 10ml of magic solution and the pelletts did dissolve, than you have 33ml at 133.33mg/ml like I said earlier. Therefore adding 20ml of oil will bring you to 75mg/ml!

 

[vitor1]

The pellets did disolve all the way so I believe this is what has happened...Thanks for everyones help..

 

[needleboy]

Glad we could help, and good luck!

 

[Zyglamail]

If you did have 10ml of magic solution and the pelletts did dissolve, than you have 33ml at 133.33mg/ml like I said earlier. Therefore adding 20ml of oil will bring you to 75mg/ml!

Yeah, sounds like he got a mix of a 2gf and 4gf, 10ml magic and only enough oil for a 2gf. The injections at that concentration will likely be painfull. My last batch I mixed at 150mg/ml and after 2 injections, had to add the oil I with held.