fina conversion process?

[mbw25]

I am in the process of converting fina and have a few questions,
1) I have completely dissolved 300 fina-h pellets in the solution of a 6g kit and the next step is to add the oil and let it sit until it all seperates, to speed up the process after I have thoroughly mixed the oil and the "dissolved fina solution" instead of letting it sit for hours and seperating can I just go ahead and filter the entire solution through the coffee filter then draw it up and filter it all back through the whatman filter? Because the way I see it it all has to be filtered anyway the 24 hour seperaion process seems pointless.

2) assuming the process I mentioned in question 1 is okay, will my final product be around 60mls. with a concentration of 100mgs per ml. If so would
0.75mls be a sufficient dose to take every day for 6-7 weeks?

I am a new member on this site and everyone has been very helpful thanks very much. I have taken tren on and off for 5 years, but this is my first experience with making it so I'm trying to do it by the book.

 

[rakasha681]

Stick with the directions. If you filter it before it is all disolved, the filler and gunk your filtering out will still contain a good amount of tren, and thus your final product will be weak. Its not a race, and remember, this your your body your dealing with... take your time and make sure its done correctly
If you want to speed up the disolving process, you could always crush the pellets before adding them to the disolving solution. I usually let my fina sit for 2 or 3 days before i continue on.

For question number 2, it doesnt matter if you use method one or not, the answer to your question is still the same =P If you have never used tren before, you definitely dont want to use more then 75mg a day, probably be better at 50mg ED.

But before we get into all of that, lets go over a few things. As to why noone has answered your questions... (i actually answered your first post on fina).. you have no intro post, noone know who you are, what your stats are, what your goals are, what your experience is, so most people arent going to volunteer information that you could potentially use to hurt yourself. That being said... What are your stats and cycle history? that will help us determine what your best route for the tren would be. You do know you need to stack it with some test right?

I am in the process of converting fina and have a few questions,
1) I have completely dissolved 300 fina-h pellets in the solution of a 6g kit and the next step is to add the oil and let it sit until it all seperates, to speed up the process after I have thoroughly mixed the oil and the "dissolved fina solution" instead of letting it sit for hours and seperating can I just go ahead and filter the entire solution through the coffee filter then draw it up and filter it all back through the whatman filter? Because the way I see it it all has to be filtered anyway the 24 hour seperaion process seems pointless.

2) assuming the process I mentioned in question 1 is okay, will my final product be around 60mls. with a concentration of 100mgs per ml. If so would
0.75mls be a sufficient dose to take every day for 6-7 weeks?

I am a new member on this site and everyone has been very helpful thanks very much. I have taken tren on and off for 5 years, but this is my first experience with making it so I'm trying to do it by the book.

 

[mbw25]

thanks for your help I did let all the pellets dissolve overnight and the result was a thick dark brown liquid with most of the junk at the bottom my question was instead of pulling the tren off the top why not filter all contents through the coffee filter then through the whatman

 

[MR. BMJ]

After adding the oil, the easiest thing to do is just place it on the shelf and filter it the next day. All the sediment will fall to the bottom and it will be a lot easier to filter it. You can heat up the solution in some warm-hot water and it will help speed things up, but i'd still recommend waiting until the next day to filter it. The coffee filter can be used, but if you wait until the next day, then it will nt be needed. One thing that helps is running it through a pre-filter first before the final filter.

At 60ml and 100mg/ml concentration, this is expecting 100% conversion success. It will more than likely not come out exactly to that both with concentration and total solution. When using the 4,000mg kits, I will get somewhere between 42-48ml's worth of solution at around a ballpark estimate of 75mg/ml give or take some. The difference will depend on how anal you want to get on draining every bit of solution from the sludge/sediment, spillage, and filtering (either with or without the coffee filter, and of course the syringe filter).

One tip...I like to use a smaller syringe than the usual 10-20ml syringes because less pressure is needed. I use a 5ml syringe for filtering and it goes through much easier. Also, do not put too much pressure on the syringe or else it will blow up the filter. Look for a steady pressure and a steady flow.

Yes...1/2-3/4ml will be good for use.

Good luck bud!
BMJ

 

[MR. BMJ]

The difference in solution color will vary depending on the oxidation of the fillers in the pellets and the time you let it sit before filtering.

BMJ