Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply US-PHARMACIES UGL OZ
Raptor Labs UGFREAK OxygenPharm
napsgeargenezapharmateuticals domestic-supplyUS-PHARMACIES UGL OZUGFREAKRaptor LabsOxygenPharm

boot sector?!

Scourge

New member
anyone know how to remove the boot sector from a hard drive?

i have windows xp, added an older hard drive i had laying around that had win2k on it.

xp detected it and let me delete all the files off it, but now on boot up it defaults to win98 and wont let me boot winxp.

now i set the terminator to the slave setting on the secondary drive. but since the primary drive is scsi the os defaults to the ide drive.

but i can't find any boot files on the drive when running xp. any advice? should i just go get something like partition magic?
 
Whoa whoa whoa...

You should just set your primary HD to the boot drive... in your Bios... get partition magic??? I've got 2 HD's on my computer, never had this problem... in fact, I have my old Win 98 on my D drive as back up in case XP goes kaputz.

You want a slave and a master drive... I don't see how they can operate with out that set up for one.

Secondly... if you needed to, you could reinstall XP... but that is a pain in the ass.

I would think changing the boot to your XP rather than 98 would work...

C
 
Its not the OS that is defualting to the IDE, its the motherboards CMOS, move the boot order around in your CMOS setup (F1, DEL or etc when you turn on the PC), or move the IDE drive that is booting up to your secondary IDE cable (usually where the CDROM is).

Since most systems do not run SCSI drives the CMOS of nearly every computer will defualt to a boot order something like A, CD-ROM, IDE-0
 
I cant set it in the bios because the bios doesnt read scsi devices for some reason. :(

i moved the cables around and nothing.

if it helps, i don't need the data on the secondary drive. i was going to use the zztop utility that all dells come with but i think that leaves the boot sector in place.

and when did partition magic become so damned expen$ive???!!! 70 clams is a lot of cabbage for something that get used once or twice...
 
Citruscide said:
Whoa whoa whoa...

You should just set your primary HD to the boot drive... in your Bios... get partition magic??? I've got 2 HD's on my computer, never had this problem... in fact, I have my old Win 98 on my D drive as back up in case XP goes kaputz.

You want a slave and a master drive... I don't see how they can operate with out that set up for one.


Keyword = SCSI

It's a whole different ballgame.
 
If you just want to reset your mbr (master boot record) go into dos and type format /mbr but I'm not sure if that will fix your problem.

Since I'm not sure what os you have on what drive (although it looks like you have xp and 98 on the scsi) you will want to format your secondary hd to make sure you have gotten rid of everything.

Also, you might want to check the website of your mb manufacturer and see if there is a bios update so it recognises your scsi (although it should see it since it was working fine before you put in the other hd).


If you need anymore help just pm me or something.
 
Unplug your EIDE drives, does it boot up the SCSI drive?

If the answer is yes then just move the fargin cables around OR tell your CMOS not to boot up IDE-0 as an option in your barrage of bootable disk options.
 
Top Bottom