Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply
puritysourcelabs
UGL OZ
UGFREAK
napsgeargenezapharmateuticals domestic-supplypuritysourcelabsUGL OZUGFREAK

bigred133's 3x5 log

Henry, I think you can still milk this for a while yet, rather than disrupt progress by making a big switch to the SF5x5. The Practical Programming book tells you how, but you've only mentioned Starting Strength so far, so I assume you don't have a copy. But, since I have a copy... :)

I think you should reset squats by 10% and work up from there again: 215, 220, 225, 230, 235, 237.5, 240, etc. I don't think you dropped the weight enough to give you a breather when you went back to 230.

With your bench, I'd attempt 177.5 again (as I'm sure you were going to), then try to reduce the increases (1-1.25lb) if you can. You might even want to reset these by 10% as per the squats.

For deads, I'd carry on as you were: 2.5lb increases.

In addition to the above, you should probably consider replacing back squats with front squats in workout A. That will drop the workload slightly as you'll be lifting less weight (they might be tough, but the weight will be less) and it will reduce the frequency of the back squat increases to 3 times per fortnight, thus stringing them out longer.

I wouldn't make any more changes than that. PP suggests that most people will get away with two resets and slight changes of exercises like this, before moving on to the intermediate programming (as per SF5x5).

How are you feeling? Any signs of fatigue setting in, or do you feel fairly fresh? Congrats on the progress so far!
 
First, let me say I appreciate your input AB.

OTOH: I will be lifting at 3:00 and it's 2:35 now.

I am currently reading Practical Programming, but I have not completed it yet.

There are a few things I have learned in PP that I am attempting to apply to my program:(from memory)

1. Over 3-4 weeks of heavy loading may lead to overtraining. Looking at my log, I have been trying to push maxes for over 3 weeks.

2. The difference between a novice and an intermediate is the amount of time it takes to recover from a workout and increase strength (supercompensation.)

I am no longer recovered 48 hrs after a workout, and I'm not ready to push PR's every 48hrs for another week.
I am worn out, tired, fatigued, sore, aches and pains, sleeping and eating a lot, and ready for a program that pushes PR's once a week instead of every 48 hrs.
I think you should reset squats by 10% and work up from there again: 215...
My work set for wk1 linear 5x5 is 218

In SS is says "When you can no longer make these small increases it is time for periodization."

For deads, I'd carry on as you were: 2.5lb increases.
I probally could.

In addition to the above, you should probably consider replacing back squats with front squats in workout A
While that is a good suggestion, I don't want to fuck with the program.

PP suggests that most people will get away with two resets and slight changes of exercises like this
Oh. I had not got to that part yet.

How are you feeling? Any signs of fatigue setting in, or do you feel fairly fresh?
I feel like shit. Sleeping 9-10 hrs every night and eating like a starving refugee. Always tired. The guy who works out with me feels worse, and even though I tell him to shut up and "Don't be a pussy" I realize that fatigue is accumulating.

Todays plan of squat bench and row ramped 5x5 with 1 work set at 218, 165, and 144 sounds like a welcome relief. Only deadlifting 1x a week sounds good too.

While you are probably right, what it really comes down to is my understanding that my personal ability to push PR's every 48hrs is no longer possible. I could maybe sqeeze out a few more PR's on deads and rows, but that's only a small portion of the program.

BTW: Why do you call it the SF5x5? What does SF stand for? I'm talking about the training sticky madcow Bill Star Intermediate 5x5 here:
http://www.geocities.com/elitemadcow1/5x5_Program/Linear_5x5.htm

BTW: here's my 5x5 spreadsheet. will like to new thread tomorrow.

http://spreadsheets.google.com/pub?key=pQVpKAxEpDFUoHyU-tgSJCA

gone to the gym... wish I had more time to discuss
 
If you're feeling that fatigued, you're probably due for a bigger reset than I suggested then and what you're planning makes sense. I still think you could do something in between what you're doing and the intermediate 5x5, but it's your call.

The SF5x5 and DF5x5 are what we (including madcow) used to call the intermediate and advanced 5x5's respectively, before madcow set up his geocities site (SF = single factor; DF = dual factor).

bigred133 said:
While that is a good suggestion, I don't want to fuck with the program.
But my suggestions were part of the program :). The 3x5, intermediate and advanced 5x5's are all part of a series that you progress along over time as you advance and your training needs change. As such, they're merely snapshots that work at particular points in time. In between those times, i.e. when you stall, you will have to make small changes and do resets to get things going again. With such changes (my suggestion of front squats was such a change from PP), the 3x5 eventually becomes the intermediate 5x5, which itself eventually becomes the advanced 5x5. There's nothing wrong with jumping from 3x5 to intermediate 5x5, but there are steps in between that are still part of the 'program'. This is all covered in PP, so enjoy :)
 
If you're feeling that fatigued, you're probably due for a bigger reset than I suggested then and what you're planning makes sense.
I have been experiencing accumlating fatigue for some time now, but I wanted to continue to push PR's as long as I could.

I still think you could do something in between what you're doing and the intermediate 5x5, but it's your call
I could do something in between if I was sure what I should do. I am not confident enough in my understanding of programming to begin experimenting and risk screwing it up.

I am confident in your understanding of programming AB.

My level of fatigue would have to be taken into account.

I could possibly deload for a week, and then reset the 3x5 at 80% and work my way up from there. That was my first plan.

I read through some Rippetoe and Pendlay interviews that gave me some other ideas.

I read through various logs here on EF and somewhere I got the idea that is was better to go to the SF5x5 when the majority of the lifts on the 3x5 stalled, instead of resetting the 3x5.

(SF = single factor; DF = dual factor)
Understood.


my suggestions were part of the program
Yes, they were.

Somewhere in between may work, but I cannot help but wonder if it would end up with another series of missed reps when I get to the point where I try to push PRs every 48hrs with the 3x5 again. Front squats on Wed. would space that out some, but the other lifts are catching up also.

In one of the books, either SS or PP, it says it is better to make smaller increases instead of ending up with missed reps.

I am microloading and missing reps.

Somewhere in between may work, IF I get it right. Changing from 48 hour increases to weekly increases by switching to the SF5x5 will work IMO. The change in volume will help also.

I've missed reps on:
29 Dec bench at 175
31 Dec squat at 235
02 Jan bench at 175 AGAIN.
04 Jan squat at 230 (decreased weight)
11 Jan bench at 177.5
13 Jan squat at 236

Should this pattern show us that increases every 48 hours are no longer possible? Deads and rows are not on that list but my back tells me it needs a temporary reset.

Maybe I should have reset 10% when I stalled. My understanding from SS was to repeat with the same weight on the next workout if a few reps were missed. If more than a few reps were missed, then the increase was too much and the weight should be reduced to the weight used in the previous workout. Further increases would be made at smaller increments. 2.5 instead of 5. 1 instead of 2.5...

I keep going back to the chart in PP that shows the difference between novice, intermediate, and advanced is the ability in increase every workout, every week, and every month.

I look at my progress, and it is no longer sucessfull every 48 hrs.

If I better understood the steps in between, I would be confident in planning for programming in between.

I appreciate your help AB. While I am starting to realize that I could gain strength faster by trying something in between the two programs, I am not confident enough to go off the path as I currently understand it. That means jumping from 3x5 to SF until I understand better.

I read some more of PP last night. The chapter about "Things you need to know."

My appreciation goes to the authors for provididing us with a way to understand how to plan a strength training program over time with the necessary changes. I've read the madcow training theory information, but this book is so much more.

I had hoped to finish the book before I finished the 3x5, but that has not worked out as I planned.
 
Well, you've definitely got things in hand. k to you bigred. I'm sure you'll do great on the SF 5x5. Good luck!

BTW, the last 4-5 pages of the Novice chapter are where the reset info I mentioned came from.
 
Thanks buddy! I made my way through the section in PP on genetics last night. Lots of diverse but applicable info in that book.
 
Top Bottom