Bi injection question

[KINGKONG69]

All i have for pins are 23 guage, 1.5", and 25 guage 1".
can i use the 1" 25guage for a bi injection. arent bi injections only supposed to be 1/2" deep, so could i just push it in half way. would this work, and also how deep are delt injections, and could i use the 1" needle also.

 

[KINGKONG69]

@

 

[The Bull]

I would use 1/2" pins.....IMO

 

[E-Rawk]

i use 22ga 1.5" pins but i only go in about 1'. It all depends on how big your arms are but make sure you are injecting in the peak of your bicep. I generally flew and find my peak right before i inject. That will be the location with the most muscle obiously.

 

[the truth]

I believe 1 inch pins are best for bi/tri shots. 25 gauge is preferable to larger gauge, but not all oils will flow that readily through a 25, and I don't like to heat the syringe or spend a long time with the pin in my biceps.

 

[Jeff_rys]

don't do it

the pin as always to go in FULLY. If the needle is too long, then one must buy shorter ones.
When sticking the pin halfway in, you can end up in a vein without knowing it.

 

[elite hot topic]

Jeff is right.

Let me tell you what happened to me!!!

When I started injecting my bis I only had 22g 1.5's. So I said the hell with it I will only go in 1/2 way. Well I would stick it in and asperate and some times I would see a little blood and others I would see no blood. If I saw no blood I would procede with the injection, While injecting I notices my hand moving without me knowing.
I quickly asperated it again and sometimes I would find blood, Meaning I eather wend deeper and hit a vein or I had went through a vein early in the injection.

But This can be done as long as you are aware.

One more thing you need to realize. I believe that you need to inject lover in the bicept. Reason being, flex and put your finger on the peak, now slowly straighten your arm keeping your finger on the same spot. You will notice that the meat of your arm is now lower that your finger.

 

[bbigman2000]

Shoot right on the peak of the bi, go three quarters to a inch deep and dont bother aspirating I have done thousands of shots without aspirating, thats bollocks, also use 1" pins for the delts, and get some one to shoot it in for you, go all the way in with 1" pin, delt shots are very good and always easy.