50mg D-bol tabs

[Swole_2112]

Anybody here have experience using 50mg d-bol tabs? They're what I'm going to be using for this next cycle and wanted to have a little info on them before I start the cycle.

 

[armo72]

If they are BD they should be good!

 

[swordfish151]

Anybody here have experience using 50mg d-bol tabs? They're what I'm going to be using for this next cycle and wanted to have a little info on them before I start the cycle.

Tabs or caps?

 

[ninesecz]

I have used 50mg tabs... Just get a pill cutter for $5 and chop it into smaller doses

 

[bmcadoo44]

must be a fat ass tab

 

[Swole_2112]

Tabs or caps?

Tabs, to the best of my knowledge.

 

[Mr.X]

I pee had some 50mg dbol...never got why. Those tabs are just way too hard to measure... what if you want to take 20 mgs? You'll never really get the dosage you want.

 

[CRounder99]

must be a fat ass tab

whys that?

 

[solidspine]

Thats a lot of d-bol in one tab, I like 5mg or 10 mg tabs and can split them up over the course of the day,

don't want to take them all at once.

 

[swordfish151]

Thats a lot of d-bol in one tab, I like 5mg or 10 mg tabs and can split them up over the course of the day,

don't want to take them all at once.

Agreed..i can see in a cap..but a tab...

 

[xido]

i've seen 45mg pressed ip tabs, i just got my 50mg caps.

 

[DBBT]

how much dbol are you guys taking with these 50mg tabs, one two three?

 

[silverfish]

GL also.

 

[Swole_2112]

Like nine said, just get a pill cutter. If they are tabs, you could cut them into halves or quarters.

 

[Wrongun]

I pee had some 50mg dbol...never got why. Those tabs are just way too hard to measure... what if you want to take 20 mgs? You'll never really get the dosage you want.

Agreed and IMHO labs only make these as they are easy to ship but just about useless to the user. Makers of pills, tablets, or caplets have standard size moulds for the precise size of their pill. It does not matter what the active ingredients are because the manufacturer will add fillers, binders, waxes, and other excipients to take up the space. A filler does nothing more than take up volume and some common fillers are talcum powder, sugar, whey and yeast. If a company claims it does not use any of these common fillers, then they surely use dehydrogenated animal fat. They have to use something to fill up the space within the mould. Also they must use wax or some kind of binders to make the components stick together when they squeeze everything to make the pill.

Bearing this in mind we therefore can deduce the active ingredient is ‘’mixed with the filler’’ and there is no science to gain even distribution.

So for example if we have a 50mg Dbol tab with a ½ life of 3-4 hours and that is our daily dosage (50mg ED) and we say the waking day for administration spread is 16 hours we will will need to split the tab into ¼’s (one every 4 hours).

This would give use a dosage of 12.5mg every 4 hours but how can we be sure? Remembering how the tab is made it could quite easily be:

0mg
5mg
30mg
15mg

As the split we make in the tab we do not know if it is filler or active ingredient. This therefore effects the blood concentration levels as if we were to plot on a graph it certainly would not be flat-line (which is the optimum).

10mg is the highest practical dbol tab IMHO

Wrongun!

 

[gettnlarge01]

Those are made for people who don't want to take 20 10mg tabs a day.

 

[Swole_2112]

Agreed and IMHO labs only make these as they are easy to ship but just about useless to the user. Makers of pills, tablets, or caplets have standard size moulds for the precise size of their pill. It does not matter what the active ingredients are because the manufacturer will add fillers, binders, waxes, and other excipients to take up the space. A filler does nothing more than take up volume and some common fillers are talcum powder, sugar, whey and yeast. If a company claims it does not use any of these common fillers, then they surely use dehydrogenated animal fat. They have to use something to fill up the space within the mould. Also they must use wax or some kind of binders to make the components stick together when they squeeze everything to make the pill.

Bearing this in mind we therefore can deduce the active ingredient is ‘’mixed with the filler’’ and there is no science to gain even distribution.

So for example if we have a 50mg Dbol tab with a ½ life of 3-4 hours and that is our daily dosage (50mg ED) and we say the waking day for administration spread is 16 hours we will will need to split the tab into ¼’s (one every 4 hours).

This would give use a dosage of 12.5mg every 4 hours but how can we be sure? Remembering how the tab is made it could quite easily be:

0mg
5mg
30mg
15mg

As the split we make in the tab we do not know if it is filler or active ingredient. This therefore effects the blood concentration levels as if we were to plot on a graph it certainly would not be flat-line (which is the optimum).

10mg is the highest practical dbol tab IMHO

Wrongun!

Good point. The concentration of the active ingredients in the tab may very well not be equally distributed thoughout the entire volume of the tab. However, I still consider cutting the tabs into quarters the most effective method for dividing the dosage equally throughout the day. If there is filler, it's unlikely that the filler and active ingredients are equally distributed throughout the tab, however, I'd also say it's unlikely that all 50mg would be in just 1/4 of the tab and the filler occupy the remaining 3/4, or even 1/2 active ingredient and 1/2 filler.

I've got to say if it were up to me, I would just use the 10mg tabs, but that's all my hookup has.

 

[Wrongun]

Those are made for people who don't want to take 20 10mg tabs a day.

So you are saying they were made for people who take a daily dosage of 200mg ED? what do you call these people? Liver transplant waiting list crew?

Wrongun!

 

[Wrongun]

Good point. The concentration of the active ingredients in the tab may very well not be equally distributed thoughout the entire volume of the tab. However, I still consider cutting the tabs into quarters the most effective method for dividing the dosage equally throughout the day. If there is filler, it's unlikely that the filler and active ingredients are equally distributed throughout the tab, however, I'd also say it's unlikely that all 50mg would be in just 1/4 of the tab and the filler occupy the remaining 3/4, or even 1/2 active ingredient and 1/2 filler.

I've got to say if it were up to me, I would just use the 10mg tabs, but that's all my hookup has.

The problem is you just can not say and would guess that even by applying the most complicated probability calculation it still would not give that much degree of accuracy.

As you say 5mg would be ideal if purist but if dosage over 40mg then 10mg very practical

Wrongun!

 

[CRounder99]

I just split my 50mg in half and take one in the AM and one in the PM. Simple enough.

 

[Swole_2112]

I just split my 50mg in half and take one in the AM and one in the PM. Simple enough.

Exactly

 

[Bilwil]

I split mine into 4 pieces and take 3 a day for an "average" of 37.5mg a day. I know there is some variation with this, but it seems to work out okay . . . I am up 14.4 lbs in the first 9 days of my cycle

Bilwil

 

[Wrongun]

I just split my 50mg in half and take one in the AM and one in the PM. Simple enough.

Again i may be being purist here with the objective to obtain optimum blood concentration levels but if the half life is 3-4 hours then your administration of the med will cause large ''peaks & troughs'' would it not?

If you add to the fact that how do you know that you are not taking 38mg at say 09:00 with a half life of 3-4 hours and then 12mg at say 14:00 again with a half life of 3-4 hours?

How can that be beneficial?

Is anyone saying that these tabs are actually a benefit or are you just saying you have to put up with it as all you can get and actually they are very impractical?

Wrongun!

 

[Wrongun]

I split mine into 4 pieces and take 3 a day for an "average" of 37.5mg a day. I know there is some variation with this, but it seems to work out okay . . . I am up 14.4 lbs in the first 9 days of my cycle

Bilwil

Of course dbol is dbol and will work even if you took 50mg once a day. Would it work as well?

I gues what is being asked is why do people adopt the 50mg tabs when IMHO they are impractical?

Wrongun!

 

[gettnlarge01]

So you are saying they were made for people who take a daily dosage of 200mg ED? what do you call these people? Liver transplant waiting list crew?

Wrongun!

I use 150mg/ed with no problems at all for 6wks.Some can handle higher doses some can't.I've been doing this for years and my liver and kidneys are fine.

 

[CRounder99]

Of course dbol is dbol and will work even if you took 50mg once a day. Would it work as well?

I gues what is being asked is why do people adopt the 50mg tabs when IMHO they are impractical?

Wrongun!

I understand your point, but in my case I didnt have a choice as to which DBol I got a hold of. Therefore, I stick to splitting it in two, once in the morning, once in the evening.

 

[Wrongun]

I use 150mg/ed with no problems at all for 6wks.Some can handle higher doses some can't.I've been doing this for years and my liver and kidneys are fine.

And what would you say the benefits of 150mg ED over 70mg ED do you not find a saturation level or do you have no problem with that as well?

Wrongun!

 

[Swole_2112]

And what would you say the benefits of 150mg ED over 70mg ED do you not find a saturation level or do you have no problem with that as well?

Wrongun!

Hey Gettnlarge,

I'm interested in your response to this question.

 

[Wrongun]

Bump for Gettnlarge as interested i always fine saturation with Dbol

Wrongun!