Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply
puritysourcelabs
UGL OZ
UGFREAK
napsgeargenezapharmateuticals domestic-supplypuritysourcelabsUGL OZUGFREAK

21g pinz

2

2scoops

New member
Just got my karachi sustanon and my pink thai's cant wait its my first cycle
anyway my source has given me 21 gauge1.5 pinz
are these ok or will a smaller pin be better i am not being a pussy
i just dont want to much soreness
thanks
 
I can handle 20g pins in my glutes, but I wouldn't try it anywhere else. Although, there are some real hardcore guys on the board that claim to use 18g for everything, so......try em and see what you think. Otherwise, you can get smaller pins. They are cheap and easy to get.
 
yeah

I have been using 21g's to put my enan in my glutes and it is a little sore.

but its nothing too bad and I'm sure you can handle it. Maybe I'm just too cheap to spend on extra darts but then again I expect a little soreness from injections anyway.
 
i just ordered 20 guage pins. my winny wont fit through a 23 and i didnt want to risk getting 22's and them not working either.

i'll be pokin all over cause of ED shots
 
I use 20g for quads, with little or no pain. If you don't want to get sore, after you pull the pin out rub the spot very hard for a few min's.
 
20's or 21s are good for drawing, but I wouldn't inject with them :)

Spend $10 and get a box of 100, 25g pins...
 
the only size i ever used were 21g 1.5 in. for delts, glutes, anywhere that i shoot. maybe since when i got my gear thats the needle size my friend had so thats what i used and thats what i got accostmed too.
 
I don't mind using 21g 1-1/2" for a lot of sites, but I've recently started hitting the 23g 1" for a lot of my injects... it's nice to be able to just bury the pin and not worry about overpenetration as is sometimes the case with 21g 1-1/2".

-M
 
Dr. M said:
I don't mind using 21g 1-1/2" for a lot of sites, but I've recently started hitting the 23g 1" for a lot of my injects... it's nice to be able to just bury the pin and not worry about overpenetration as is sometimes the case with 21g 1-1/2".

-M
Click to expand...

yeah 23g work for just about anywhere but i cant fit my winny through it
 
just this second done my first ever injection
I did this with a 21 1.5 in the glutes and a was shitting myself
but there is nothing to it whats all the fuss about.Then again I haven't hit a nerve or vein yet.Welcome to the dark side I say.
:)
 
well...

congrats buddy, the first one is scary but you begin to look forward to them after a couple!

what are you cycling by the way?
 
Get some 23g 1.5in pins. Your ass will appreciate it, trust me. I started out using 22g then switched to 23 and couldn't believe the difference.
 
is there any validity to 21g pins causing mire scar tissue than 23 or 25g??? DR Matt?

Bicepts, what winny are u using? what Mg/ml? it has been my experience that most MX gear is more difficult to inject due to larger granule size, but I have had no problems w/ a 23g pin @50 mg/ml
 
PharmaPhreak said:
is there any validity to 21g pins causing mire scar tissue than 23 or 25g??? DR Matt?

Bicepts, what winny are u using? what Mg/ml? it has been my experience that most MX gear is more difficult to inject due to larger granule size, but I have had no problems w/ a 23g pin @50 mg/ml
Click to expand...

im using golden triangle 100mg/ml

it goes through if i heat it up, but i have to reasperate like 3 or 4 times cause it gets caught up in the needle
 
Last edited:
BIGNUTT said:
Whats the smallest guage that can be used with test. enan.? I am about to get some needles.
Click to expand...

it will go through 25s; just warm the oil up first to make it easier.

draw with 20s though.
 
AustinTX said:


it will go through 25s; just warm the oil up first to make it easier.

draw with 20s though.
Click to expand...

Is there a website or can you explain what all I need to do to get the juice from the vial to my glute? The actual procedure?

Thanks
 
25's are great for injecting, they take a little time to disperse all the gear, but you can barely feel them go in. And at least in my quads, they don't result in even a drop of blood after the injection. The downside is that if you try drawing through them (my experience is with test ethan), you'll be waiting 4-5 minutes to empty out a 250ml amp even if you warm up the gear first.

23's are a good compromise, they disperse the gear in a relatively short time, and they don't take as long to draw through as 25's although it still takes a minute or two.

21's and bigger...? No thanks. It's not worth the soreness just to save a few seconds on how long it takes to draw and inject.

All that said, the best of all ways to go about it is to buy all your syringes with 20's already on them and then an equivilent amount of small gauge pinz only (23's or 25's). Then draw with the 20's, and after you have the gear in the syringe, switch to the smaller gauge needle for injection. You get the best of both worlds this way, (fast draw and painless injections).
 
Needles

Hey, if you need more needles I get mine from the uk and they're £4.99 for 100, and syringes are £4.99 for 100 too. BTW I use 22g 1.5s and harly feel a thing (in the glutes). I do recomend warming the juice up first though.

Not sure If I can give the website for the needles coz you're not allowed to advertise on here but pm or e-mail me and i'll give it you.

--------------------------------------

[email protected]
 
You must log in or register to reply here.

Similar threads

P
Sus250+Tren+Masteron
Replies
23
Views
3K
SSFITNESS
SSFITNESS
JackSmithBoye
Deca, Sustanon And PCT Questions. *First Cycle*
Replies
11
Views
2K
dylangemelli
dylangemelli
Noah Wixx
Approved BELIGAS/PHARMAQO DOMESTIC SUPPLY TD!!!
Replies
16
Views
2K
RoySimpson
RoySimpson
hypogaeum
Approved Log Testosterone HGH Retatrutide Log - Sponsored by UGL OZ
Replies
16
Views
1K
the_alcatraz
the_alcatraz
Legomannen123
Tips for a 2nd cycle?
Replies
29
Views
4K
25homes
25homes
Top Bottom