Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply
puritysourcelabs
UGL OZ
UGFREAK
napsgeargenezapharmateuticals domestic-supplypuritysourcelabsUGL OZUGFREAK

200mg/ml Primo?

Vascular Freak

New member
I am planning for my next cycle and want to hit some primo once again along with some test and maybe var or eq. BUT running 800mg of primo sucks since most labs make 100mg/ml concentration. Is anyone making 200mg/ml concentrations yet? I used BD primo last run with great results, but it was too much oil to inject when taking into account the test and eq injections every week along with it.
 
I have wondered this myself and have decided when its time to do primo I think my only option will be to homebrew i can't see spending that much for one compound for one cycle. And that is far too many injections at those doses.
 
I used primo from a private lab that made 200mg/ml. that shit hurt like a mother fucker. I would get all swollen and sore for almost 1.5 weeks! Since then, I do not touch it at that concentration.
 
why do I feel like I live under a rock it seems like everyone here knows every source available. I unfurtunatley only have one. everyone knows every ug lab as well. Do I live under a rock or am I just not looking hard enough?
 
Stryker1992 said:
I used primo from a private lab that made 200mg/ml. that shit hurt like a mother fucker. I would get all swollen and sore for almost 1.5 weeks! Since then, I do not touch it at that concentration.
ah yes...i remember that stryker. i was gonna use the same 200mg primo but after your experience i decided not to. that lab doesn't carry that concentration anymore.
 
many good sources make a 200mg primo on request . i wont name um on elitefitness becuase they would get upset . all i can say is keep looking on other boards outlaw,os,abb,dbb ,t-m quite a few will make it for you or your better off to just get the powder .It will hold at 200mg per ml but a good source told me at 300mg it crashed .
I am looking forward to a tri primo comming out soon. primo base 50mg, primo acetate 75mg, primo enath 75mg
but i guess it needs to be shot eod or 2 times a week

dude come out from under the rock and look on the boards your not gonna get it off elite and if you do be weary . the wise man once said its better find what you need then cross your arms and wait for what you need.
 
Yes sir good 'ole Pro Form makes some awesome 200mg/mL Primo....

T-Matt
 
why do I feel like I live under a rock it seems like everyone here knows every source available. I unfurtunatley only have one. everyone knows every ug lab as well. Do I live under a rock or am I just not looking hard enough?

Where do you live, there are at least 3 major suppliers of 200mg/ml primo,
 
chazk said:
many good sources make a 200mg primo on request . i wont name um on elitefitness becuase they would get upset . all i can say is keep looking on other boards outlaw,os,abb,dbb ,t-m quite a few will make it for you or your better off to just get the powder .It will hold at 200mg per ml but a good source told me at 300mg it crashed .
I am looking forward to a tri primo comming out soon. primo base 50mg, primo acetate 75mg, primo enath 75mg
but i guess it needs to be shot eod or 2 times a week

dude come out from under the rock and look on the boards your not gonna get it off elite and if you do be weary . the wise man once said its better find what you need then cross your arms and wait for what you need.

Wait... You just said you only use human grade gear.... Pfft, you are bashing mexican gear and you use UG gear. Now that is comical
 
black sheep said:
Wait... You just said you only use human grade gear.... Pfft, you are bashing mexican gear and you use UG gear. Now that is comical
HELLO BLACKSHEEP i have not used any underground labs the person making the tri primo is my private lab source once the human grade powder comes in i'm welcome to go to his lab at the local state university and watch him make it .
the guy asked if anyone is making 200mg primo i told him to look around if that is what he seeks then he has to go underground or make it on his own no human grade exist over 100mg per cc.I suggest he get the powder and just brew it himself .

as far as the mexican gear goes you claim some americans moved to mexico to make stallion labs why dont you just come right out and tell us your brother or father moved to mexico and uses you as a direct source to funnel the shit back into the usa and sell to people over the internet .
yea i called it big fucking deal .seems your the only one witha boner for stallion labs .

i never denied i and a friend make our own gear its not underground he is student with a entire lab on the weekends to do what every he wants to do for research with 100% human grade powders. underground is when someone else brews in in god knows what conditions.
 
I should be able to get it in 200mg concentration. If so, I am going to try it at 800mg ew for a solid 12-14 weeks along with some test and t3. In the past I just couldn't handle that many sticks, I felt handicap from all the injection pain (too much oil volume).

Would primo offset the negative sides of dbol if the dbol was run at a low dose to jumpstart the cycle? I normally stick with var or winstrol for orals but its winter and everyone talks about how great dbol is. What is a good low dose of dbol that will give gains with minimal sides (bloat mainly). Or would I be better off running var at a higher dose as opposed to low dose dbol? I want nothing but quality muscle, no watery messes!
 
you can easily make it at 225mg/ml without any risk of it crashing using 2%BA and 18%BB. i've had it hold at 250 but i've also had it crash at 250. 225 would be the upper limit on it.

And bro, i don't know if you have ever made gear but you are talking about a grand worth of primo for that cycle, you could easily make it for 1/5 the cost if you decided to brew it yourself
 
bruce410 said:
pro form, will be running in 4 months. can't fucking wait

How is the injection pain from the pro form primo? Scherings always made a women out of me, bd primo wasn't to bad. Is Pro form painless?
 
Vascular Freak said:
I should be able to get it in 200mg concentration. If so, I am going to try it at 800mg ew for a solid 12-14 weeks along with some test and t3. In the past I just couldn't handle that many sticks, I felt handicap from all the injection pain (too much oil volume).

Would primo offset the negative sides of dbol if the dbol was run at a low dose to jumpstart the cycle? I normally stick with var or winstrol for orals but its winter and everyone talks about how great dbol is. What is a good low dose of dbol that will give gains with minimal sides (bloat mainly). Or would I be better off running var at a higher dose as opposed to low dose dbol? I want nothing but quality muscle, no watery messes!

dbol with aifm or aromasin cheaper and more effective
 
drrman said:
you can easily make it at 225mg/ml without any risk of it crashing using 2%BA and 18%BB. i've had it hold at 250 but i've also had it crash at 250. 225 would be the upper limit on it.

And bro, i don't know if you have ever made gear but you are talking about a grand worth of primo for that cycle, you could easily make it for 1/5 the cost if you decided to brew it yourself

I would love to make my own bro but I don't really have the knowledge, nor the place to correctly make it. I would rather spend the money than screw it up myself.

I can make good, chicken, steak, and oatmeal.....but primo might be bad news! :)
 
I loved the 200mg/ml primo I had last spring, used 1g weekly along with 80mg of var daily and the results were pretty nice. I got zero injection pain too, I feel bad for those who do.
 
chazk said:
i never denied i and a friend make our own gear its not underground he is student with a entire lab on the weekends to do what every he wants to do for research with 100% human grade powders. underground is when someone else brews in in god knows what conditions.

Sounds like underground to me. "I and a friend make our own gear its not underground"???? Do you have a license from the government? Just because you think that you are the only one using professional equipment and sanitary conditions, doesn't mean that your gear is not underground. Most underground labs would make the same claims of professional equipment and sanitary conditions. If they did not, and admitted they made it in their kitchen or garage, who would buy it???
:FRlol:
 
BBkingpin said:
Sounds like underground to me. "I and a friend make our own gear its not underground"???? Do you have a license from the government? Just because you think that you are the only one using professional equipment and sanitary conditions, doesn't mean that your gear is not underground. Most underground labs would make the same claims of professional equipment and sanitary conditions. If they did not, and admitted they made it in their kitchen or garage, who would buy it???
:FRlol:

EXACTO!!!!! THAT IS TOTALLY RIGHT BROTHER TOTALLY RIGHT!!
 
Vascular Freak said:
I am planning for my next cycle and want to hit some primo once again along with some test and maybe var or eq. BUT running 800mg of primo sucks since most labs make 100mg/ml concentration. Is anyone making 200mg/ml concentrations yet? I used BD primo last run with great results, but it was too much oil to inject when taking into account the test and eq injections every week along with it.


I have over 1000 Shering Amps on hand and I no longer touch them. Home brewed some 200mg/ml with grapeseed oil. Very thin, easy to inject, double the dose.......love this stuff so much I might flush the Sherings I went so far to get.
 
Top Bottom