Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply
puritysourcelabs
UGL OZ
UGFREAK
napsgeargenezapharmateuticals domestic-supplypuritysourcelabsUGL OZUGFREAK

1cc=1iu ????

No. 1cc=1ml. Not sure about the iu's. This can be altered depending on how much BA you add.

What drug are you asking about?
 
From what I know 1 international unit is very very small. 1 cc would probably be around a hundred iu's
 
Just do this. Add the Bac water. Then withdraw all of the hgh ( I'm guessing this is what you are talking about ) into your slin pins. Then just divide. If you have 10iu vials then just divide the total by 10 and that will be 1 iu of gh.

Fool proof.
 
1 ml = 1 cc -/+
100 units per 1 cc

6 mg = 18iu

1 ml = 18iu

.50 ml = 9iu

.25 ml = 4.5iu

3 International Units = 1 milligram
 
It doesn't matter what iu's = to a cc. Just as 1 cc of this or that doesn't matter. It all depends on how strong what iu or 1 cc is. 100 mg of 1cc compared to 300 mg of 1 cc are completely different strengths, while both are 1 cc.
 
I hope you are not asking about HGH. If so you are not ready for it. Maybe you are talking about HCG.

You're not ready yet because you are not smart enough.
 
mlong23 said:
I hope you are not asking about HGH. If so you are not ready for it. Maybe you are talking about HCG.

You're not ready yet because you are not smart enough.


Not ready for hgh? Why would that be? The guy could be a 50 year old looking to be young again. I hope you weren't serious.
 
Well he wouldn't be on a BB site then...

Whether HCG or HGH just figure out how many ml of water you have, and how many ius of shit... then it's basic math... 10CC of water and 10000ius of shit... 1000ius per CC or ML....
 
d_o_c_ said:
Not ready for hgh? Why would that be? The guy could be a 50 year old looking to be young again. I hope you weren't serious.


no i think that is the standard answer...just bc you don't know all your conversions you are not ready.....

you could have read tons of shit on hgh and still not know the conversions
 
mlong23 said:
I hope you are not asking about HGH. If so you are not ready for it. Maybe you are talking about HCG.

You're not ready yet because you are not smart enough.

:FRlol:

Do you know the answer ? Or are you just stroking yourself putting down others ?
 
DAYUM said:
:FRlol:

Do you know the answer ? Or are you just stroking yourself putting down others ?

I answered your dumb ass already. It depends on the strength of the injection which you are looking for.
 
d_o_c_ said:
Not ready for hgh? Why would that be? The guy could be a 50 year old looking to be young again. I hope you weren't serious.

If he is 50 and looking to be young again, than go for it.

But most people on here that ended up asking for GH are like 20 something (young 20's). No those people do not need it, unless they are a top level bodybuilder. Which many on here are not top level bodybuilders, and if they were top level than more than likely they would not be asking a dumb question.
 
jon79 said:
no i think that is the standard answer...just bc you don't know all your conversions you are not ready.....

you could have read tons of shit on hgh and still not know the conversions

If you have read tons of stuff, then you should have some basic knowledge and not need to know a simple answer. If you are plain stupid than that is your fault, but no matter how many times smart people try and help stupid people they don't seem to understand and get mad at the smart people because they think they messing with them.

The guy never even said what he was using. I have never used HGH, so I wouldn't really give an answer to that. As DOC stated earlier there is a way to divide out and get the answer. When someone asks a question and gives no detail to what exactly they are using (what strength, what drug) and wants an answer this is very hard to do.
 
it depends on the how much of the substance you have. For example, if you have a 2000iu amp of HCG, and you add 1ml of bact. water, that yields 2000iu's of reconstituted HCG per ml. If you add 2ml of bact. water, that still yields 2000iu of bact. water, but per 2ml. In this case each ml yields 1000iu. But, if you have a 5000iu vial of HCG, 1ml of water yields 5000iu's. 1ml does not automatically equate to 1iu.

Similarly, for HGH, if you have an 8iu vial, adding 1ml of bact. water will yield 8iu of gh. 100units on a slin pin DOES equal 1ml. So, if you want to take 4iu of gh, fill slin pin half way, or 50units. I'm not sure what you're using (gh or hcg) so I spelled them both out for you. I hope this helps.
 
mlong23 said:
I answered your dumb ass already. It depends on the strength of the injection which you are looking for.


WHAT GOODAMN DIFFERENCE DOES THE STRENGTH HAVE TO DO WITH A UNIT OF MEASURMENT ???

ONE FUCKIN IU IS ONE FUCKIN IU NOT MATTER WHAT THE STRENGTH OF THE SUBSTANCE IS YOU FUCKIN MORON. JUST LIKE ONE CC IS ONE CC.

GET YOUR FUCKIN HEAD OUT YOUR ASS YOU FUCKIN REDNECK AND

UNDERSTAND

THE QUESTION. THE QUESTION IS HOW MUCH OF A CC IS EQUAL TO A ONE IU.

YOU ARE MAKING YOURSELF LOOK LIKE THE IGNORANT FUCK YOU ARE !!!
 
DAYUM said:
WHAT GOODAMN DIFFERENCE DOES THE STRENGTH HAVE TO DO WITH A UNIT OF MEASURMENT ???

ONE FUCKIN IU IS ONE FUCKIN IU NOT MATTER WHAT THE STRENGTH OF THE SUBSTANCE IS YOU FUCKIN MORON. JUST LIKE ONE CC IS ONE CC.

GET YOUR FUCKIN HEAD OUT YOUR ASS YOU FUCKIN REDNECK AND

UNDERSTAND

THE QUESTION. THE QUESTION IS HOW MUCH OF A CC IS EQUAL TO A ONE IU.

YOU ARE MAKING YOURSELF LOOK LIKE THE IGNORANT FUCK YOU ARE !!!

Thankyou. Glad to have made your acquintance. Redneck, because of what exactly?

I try to help your ass out by saying it doesn't matter what an iu is equivalent to, only that the strength matters. If you would like to debate the issue on this than you fucking retarded. DOC has already answered your question about the conversion ratio.

I think the only one lookig ignorant is you. But again this is just my opinion, and I don't really care what yours is.
 
jeb0177 said:
iu is the chemical potency of the drug brotha. international unit.

It is the measurement, not the potency. Just as a cc or ml is the measurement but not the potency.
 
gjohnson5 said:
IU's in Pharmacology is infact a measurement of biological activity....

http://en.wikipedia.org/wiki/International_unit

This is straight from the URL that you posted. What does the first sentence say? It is a unit of measurement, plain and simple in your own research. How does this not say exactly what I had been saying all along.

Now, it is a unit of measurement for the amount based on a measured biological activity. Well this can be mistaken, can it not. You can dilute the potency of the drug, which will throw the assumed IU measurement of effect out the window.

If I am wrong in assuming that what I have just posted is correct, please explain and then I will call myself a dumbass. But for now I believe what I have said to be correct, and that you just verified what I had said all along (not being a smart ass either).


In pharmacology, the International unit (IU, alternatively abbreviated UI, from French unité internationale) is a unit of measurement for the amount of a substance, based on measured biological activity (or effect). It is used for vitamins, hormones, some drugs, vaccines, blood products and similar biologically active substances. Despite its name, the IU is not part of the International System of Units used in physics and chemistry.

The precise definition of one IU differs from substance to substance and is established by international agreement. To define an IU of a substance, the Committee on Biological Standardization of the World Health Organization provides a reference preparation of the substance, (arbitrarily) sets the number of IUs contained in that preparation, and specifies a biological procedure to compare other preparations to the reference preparation. The goal here is that different preparations with the same biological effect will contain the same number of IUs.

For some substances, the equivalent mass of one IU is later established, and the IU is then officially abandoned for that substance. However, the unit often remains in use nevertheless, because it is convenient. For example, Vitamin E exists in a number of different forms, all having different biological activities. Rather than specifying the precise type and mass of vitamin E in a preparation, for the purposes of pharmacology it is sufficient to simply specify the number of IUs of vitamin E.

The mass equivalents of 1 IU for selected substances:

1 IU Insulin: the biological equivalent of about 45.5 μg pure crystalline insulin (1/22 mg exactly)
1 IU Vitamin A: the biological equivalent of 0.3 μg retinol, or of 0.6 μg beta-carotene
1 IU Vitamin C: 50 μg ascorbic acid
1 IU Vitamin D: the biological equivalent of 0.025 μg cholecalciferol/ergocalciferol (1/40 μg exactly)
1 IU Vitamin E: the biological equivalent of about 0.667 mg d-alpha-tocopherol (2/3 mg exactly), or of 1 mg of dl-alpha-tocopherol acetate
 
gjohnson5 said:
Please reread this post. The biological activity of a drug is dependant on the dosage of the drug one took , correct?

Maybe I have confused myself and everyone else in what I was trying to get at from the begining. DOC posted that 100 ius = 1 cc = 1ml. Great, this is the answer the original person was asking.

But what I was trying to say is that doesn't matter if the potency of the drug is not what you are seeking. Many people come on here and post a question that know nothing about steroids or anything, then they take something and you see a post a few weeks later of them saying they are all fucked up.

I was trying to say that if the person is looking for a stength of the drug, then don't worry about the conversion ratio. If my posts didn't make it clear earlier, than I apoligize.
 
Top Bottom