What size pins???

[criffer]

Other than slin pins, if you were gonna just have one size needle and syringe for shooting a variety of gear, what size would it be???

Im thinking either

23guage 1" 3cc or 25guage 1" 3cc

Thoughts/comments???

 

[Mammoth2500]

I always use the 25g 1" 3cc to shoot and 18g tip 1.5" to draw.

 

[zips92]

I always use the 25g 1" 3cc to shoot and 18g tip 1.5" to draw.

Yeah that sounds real good, changing needles is not a big deal.

The only problem I have sometimes with a 1" (any gauge or volume) is when you have amps (pop tops), and I cannot reach all the way down in to get all the product. Trying to break the glass below the score is a pain, and a longer needle solves that problem.

If only one I would say 25g, 1.5", and 3 CC...........

 

[djsf]

I bought 20g pins with syringe, and 25g and 23g pins (1 1/2") without syringe. I use the 20g with syringe to draw, then unscrew the pin and throw it away. I replace it on the syringe with a 23g for glute injection, or a 25g for quad injection.

www.getpinz.com sells pins with and without syringes in every imaginable size and combination.

 

[ALIN]

Other than slin pins, if you were gonna just have one size needle and syringe for shooting a variety of gear, what size would it be???

Im thinking either

23guage 1" 3cc or 25guage 1" 3cc

Thoughts/comments???

23g 1 1/2" for glutes.

 

[Mammoth2500]

Yeah that sounds real good, changing needles is not a big deal.

The only problem I have sometimes with a 1" (any gauge or volume) is when you have amps (pop tops), and I cannot reach all the way down in to get all the product. Trying to break the glass below the score is a pain, and a longer needle solves that problem.

If only one I would say 25g, 1.5", and 3 CC...........

Yea i don't actually change the syringe that i use to draw just the tip. After drawing with the 18g i change the tip to a 25g.

In the past with the pop tops sometime i would pull the push stopper or whatever you call it out that you press and just pour the gear from that end then put the pusher back in a little, turn needle so point is up and push all the air out.

 

[zips92]

In the past with the pop tops sometime i would pull the push stopper or whatever you call it out that you press and just pour the gear from that end then put the pusher back in a little, turn needle so point is up and push all the air out.

Duh, now there's an idea.