Oxandrolone USP23

[Herbiv0re]

Here is a synthesis of the whole process you should get through.
Use a graduated beaker or cylinder (I don't think the 2% error margin on the beaker is of much importance with var - a 10mg/ml solution would result in something between 9.98mg/ml or 10.02mg/ml)

1. Put some 151 in the beaker (100ml for example)
2. Add you 2g powder (weigh your powder first- of course) and mix with a glass stick (or anything else)
3. Add more 151 'till you reach the 200ml mark on your beaker and mix
4. Put some water to heat in a pan and stop your stove before it starts to boil (no flames or hot stove close to your beaker please !!!!!).
5. Hold your beaker in the hot water and swish till all the powder is dissolved (will take 2-3 minutes).
Your done.

Some alcohol has probably evaporated during the heating process.Just add some more till you reach the 200ml mark on you beaker.

If you use everclear you will reach concentrations of up to 20mg/ml. The process is exactly the some, but you will only need to fill your beaker to the 100ml mark.

Since this is your first time just use 151 or everclear. It leaves you a lot of margin for error - if you fuck things up you can just let the alcohol evaporate ans start it all over again.

Hope this is all clear for you - have fun. (sorry if my technical english sucks)

 

[TheAssholeFomerlyKnownAsDBBT]

Here is a synthesis of the whole process you should get through.
Use a graduated beaker or cylinder (I don't think the 2% error margin on the beaker is of much importance with var - a 10mg/ml solution would result in something between 9.98mg/ml or 10.02mg/ml)

1. Put some 151 in the beaker (100ml for example)
2. Add you 2g powder (weigh your powder first- of course) and mix with a glass stick (or anything else)
3. Add more 151 'till you reach the 200ml mark on your beaker and mix
4. Put some water to heat in a pan and stop your stove before it starts to boil (no flames or hot stove close to your beaker please !!!!!).
5. Hold your beaker in the hot water and swish till all the powder is dissolved (will take 2-3 minutes).
Your done.




Some alcohol has probably evaporated during the heating process.Just add some more till you reach the 200ml mark on you beaker.

If you use everclear you will reach concentrations of up to 20mg/ml. The process is exactly the some, but you will only need to fill your beaker to the 100ml mark.

Since this is your first time just use 151 or everclear. It leaves you a lot of margin for error - if you fuck things up you can just let the alcohol evaporate ans start it all over again.

Hope this is all clear for you - have fun. (sorry if my technical english sucks)

thanks Herbi

 

[kbrkbr]

I'm always afraid of leaving my precious powder behind in the flask or beaker, so I simply put it in the eyedropper first, then add the powder. At a low concentration like 10mg/ml, I rarely have to heat it to make it go into suspension.

BTW, I squirt the solution into my protein shakes. That shit'll gag you.

 

[Laser]

animalkits.be

 

[TheAssholeFomerlyKnownAsDBBT]

animalkits.be

sweet

 

[massatronic]

Whats the benefit of this procedure compared to just popping pill or washing down powder?

 

[Herbiv0re]

Whats the benefit of this procedure compared to just popping pill or washing down powder?

??????????????

Popping pills:
- you have to buy pills = more expensive
- press pills = very expensive
- fill capsules = more hassle, not as easy

Washing down powder :
- not very accurate...well not accurate at all. We are talking about mg's here, not spoons.

 

[TraxZBT]

instead of making it a solution... just make it a suspension.
If you have PG just put in 1 gram of pulverized var and fill it up to 50 ml's. Or if you want to go higher, add 2 grams and fill to 50 ml's. There ya got a 40mg/ml suspension which is just as good, if not better.

 

[TheAssholeFomerlyKnownAsDBBT]

instead of making it a solution... just make it a suspension.
If you have PG just put in 1 gram of pulverized var and fill it up to 50 ml's. Or if you want to go higher, add 2 grams and fill to 50 ml's. There ya got a 40mg/ml suspension which is just as good, if not better.

15mg/ml is the ideal suspension...40mg ain't gonna work and will be unbearabel to injest in one shot!!!

 

[TheAssholeFomerlyKnownAsDBBT]

Whats the benefit of this procedure compared to just popping pill or washing down powder?

massatronic: do some research...read up, 'bout how I used to get beat up Peed on, be on free lunch, and change schools every three months.'